A: Nancy, it seemed to kill the black mold on my crawl space joists, but did not completely remove the stains, at least not over a couple of days. The stains reduced in size and darkness, but did not disappear. I would call it a stain reducer vice stain remover in my case. After the concrobium dried, I followed with a stain remover (not duo blast) and the wood looks new. I'm not sure if the duo blast would have removed the stain if given more time. I also sprayed the duo blast on some moldy sheetrock and did not notice any change. The product did not seem to help with the mold on my sheetrock.
A: Glad you asked Nancy! Concrobium Mold Control eliminates mold, it is not a mold stain remover. The effective way to eliminate mold and remove the stains would be to first apply Mold Control in a thin even layer over the affected surface, allow to dry completely. Mold control works as it dries by crushing mold spores at the roots. Once completely dry the mold will be eliminated, even if mold stains remain. Next use Concrobium Duo Blast Mold & Mildew Deep Stain Remover on the mold stains, following the application directions of on the back of the bottle. Once and stains have been removed apply Mold Control again on those areas, allowing to air dry. This will effectively remove the mold and the mold stains. https://www.homedepot.com/p/Concrobium-32-oz-Mold-Control-025326/100654126 - Rust-Oleum Product Support 6
A: Great question. Rust-Oleum Concrobium Duo Blast Mold & Mildew Stain Remover is a powerful cleaning solution that targets tough and embedded mold and mildew stains on outdoor and indoor surfaces. Duo Blast can be used to remove mold stains in a variety of surfaces, including carpeting. Duo Blast contains hydrogen peroxide, be sure to test in an inconspicuous area first to ensure favorable results. Be sure to follow application instructions found on the label. - Rust-Oleum Product Support 6
A: The product page states it is safe for fabrics. Mike
A: We appreciate your interest! Rust-Oleum Concrobium Duo Blast Mold and Mildew Deep Stain Remover will help remove stains from mold on interior surfaces, including tile, stone, fiberglass, and metal surfaces. With any cleaner, we recommend applying in a test area first to ensure the desired results. - Rust-Oleum Product Support 3
A: Great question! Rust-Oleum Concrobium Duo Blast is designed to remove the stains left behind by mold and will not actually kill the mold itself. For this reason, we don't recommend using this product for that application. We need to know more about your application to make the best recommendation for you. Please feel free to call us at 800-466-7126 to discuss further. - Rust-Oleum Product Support 5
A: The Concrobium Duo Blast Mold & Mildew Deep Stain Remover is deisgned to work on mold and mildew stains on your surface. This product may not work well for a rust stain. We suggest a test application to ensure desired results. Please keep in mind that you will want to allow the product to remain on the surface for a minimum of 2 hours, but it may take up to 24 hours to see full results. - Rust-Oleum Product Support 1
A: It does not come with a mixing sprayer, you will need to get one. Most any pump sprayer works fine, though it will spray some foam vice a consistent mist. When the duo blast solutions are mixed there is a chemical reaction and the mixture foams. This will result in pressure buildup in the pump sprayer, which is not a bad thing because it takes less pumping to apply the solution.
A: Great question Ed! Rust-Oleum Concrobium Duo Blast Mold & Mildew Deep Stain Remover Jug is a one gallon container divided into two sides. Hold the gallon jug so both sides can be poured at the same time, pour into a vented pump sprayer or bucket. Spray or mop onto the surface within 2 hours of combining the solutions, once mixed it cannot be used after two hours. Allow Duo Blast to remain on the surface for a minimum of 2 hours, it may take up to 24 hours to see full results. No rinsing is required. Duo Blast is a deep stain remover, it does not eliminate mold. For mold elimination use Concrobium Mold Control, this product crushes mold at its roots as it dries. The best process is to apply Mold Control on the affected surface, allow to dry completely. When try apply Duo Blast to any mold stains (after using Mold Control the mold has been eliminated in the stains). After the stains have been removed reapply Mold Control. We would like to hear more about your experience using Mold Control Spray, give us a call at 800-466-7126 so we can try to make things right. - Rust-Oleum Product Support 6
A: Hi Ed, thank you for reaching out! Our Concrobium Duo Blast Mold & Mildew Deep Stain Remover is not flammable. - Rust-Oleum Product Support 2
A: No, it is not flammable.
A: Good question! Rust-Oleum Concrobium Duo Blast Mold & Mildew Deep Stain Remover is a powerful cleaning solution that targets tough and embedded mold and mildew. This ready to use cleaner is compose of two liquids that, when combined, create a powerful solution that targets and removes tough embedded mold and mildew stains. The two main ingredients in Duo Blast are sodium carbonate and hydrogen peroxide, these are odorless. We do recommend wearing latex or rubber gloves when applying. This is a mold stain remover, for the elimination of mold you should use Rust-Oleum Concrobium Mold Control. Apply Mold Control as directed first, then use Duo Blast on Mold and Mildew stains, after the stains are removed another application of Mold Control is recommended. https://www.homedepot.com/p/Concrobium-32-oz-Mold-Control-025326/100654126 - Rust-Oleum Product Support 6
A: Great question Hans! Rust-Oleum Concrobium Duo Blast trigger sprayer is still available at Home Depot. Always feel free to give us a call at 800-466-7126 with any Concrobium problems or concerns. https://www.homedepot.com/p/Concrobium-33-8-oz-Duo-Blast-Mold-and-Mildew-Deep-Stain-Remover-029-6670/305195647 - Rust-Oleum Product Support 6
A: Yes, it will clean mold off the basement drywall.
A: yes it will clean mold off of basement walls. Would be a good idea to primmer the spots before painting.
A: We are here to help, Arcadia! Rust-Oleum Concrobium Duo Blast Mold and Mildew Deep Stain Remover can be used on drywall to help remove stains from mold. With any cleaning product or remover, we recommend applying in a test area first to ensure favorable results. - Rust-Oleum Product Support 3
current item | |||
Where to Use | |||
---|---|---|---|
Bathroom, Floors, Furniture, Kitchen, Laundry, Metal Surfaces, Outdoor, Plastic Surfaces, Specialty | Outdoor, Specialty | Bathroom, Kitchen, Outdoor | Floors, Furniture, Hard Non-Porous Surfaces, Metal Surfaces, Outdoor, Plastic Surfaces |
Recommended Surfaces | |||
Carpet, Concrete, Dashboard, Fabric, Fiberglass, Glass, Granite, Laminate, Limestone, Marble, Metal, Painted Surfaces, Plastic, Porcelain, Quartz, Rubber | Fiberglass, Glass, Grout, Laminate, Metal, Plastic, Vinyl | Plastic, Stainless Steel, Tile, Vinyl | Concrete, Fabric, Fiberglass, Glass, Laminate, Metal, Painted Surfaces, Rubber, Stone, Tile, Upholstery, Vinyl, Wood |
Features | |||
No-Rinse | Antibacterial, Antimicrobial, Disinfecting, With Bleach | Disinfecting, Kills Mildew | No-Rinse, Non Abrasive, Non-Corrosive |
Product Dispenser Type | |||
Trigger Sprayer | Plastic Bottle | Plastic Bottle | Trigger Sprayer |
Concentrated or Ready to Use | |||
Ready to use | Ready to use | Ready to use | Ready to use |
Explore More on homedepot.com
How can we help?