Questions and Answers for DEWALT 6 Gal. 165 PSI Electric Pancake Air Compressor with 18-Gauge Pneumatic 2 in. Brad Nailer & 50 ft. x 1/4 in. Air Hose

A:  The quick connect for the DWFP55126 is a 1/4".

A:  no you can't. you need a much bigger air compressor to do the job. you can only do things like air nailer, or low volume air sprayer (I use it to spray dry wall texture which only require like less than 5 PSI) with this one.

A:  Yes,the DWFP55126 will work for this application.

A:  Thank you for your contact. We apologize for any trouble or inconvenience with he hose. On this issue, please reach out directly to DEWALT customer support so that we may work together in order to get this issue resolved for you. Thank you for your cooperation in this matter.

A:  There is small balls inside that may not be releasing. Check to make sure they are in the proper location, should be inset to allow the sleeve to move back in the correct position.

A:  The DWFP12231 is a pneumatic tool. The cord will come from the air compressor.

A:  Hi! I'm not sure why it would say that because it does work off of an air compressor. It is a pneumatic air nailer. It is a good nailer, so I'm thinking it's just a bad description on their part. Hope they change the description as this is misleading. Hope this helps!

A:  It is air, not sure why it may say corded except to note that it’s not 20 V battery operated. Own the Dewalt air model and the 20 V battery model of this tool and prefer the 20 V. 

A:  The cord they are referring to is the air hose. 

A:  Yes, but you may need to restrict the flow at the drain by partially closing the valve. Using the palm of your hand works too.  I use it to winterize the PVC water line to my pier and it works very well. 

A:  Yes, you can set the gauge to your desired PSI.

A:  The DWFP55126 provide 165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered @ 90 PSI pump. It will clean up the wood chips. We suggest referring to your chainsaw owners manual for chain oil cleanup.

A:  Yes

A:  No air hose

A:  Mine did not come with a hose.

A:  No

A:  No air hose.

A:  No the one I bought did not but y’all do sell one that comes with a hose and nail gun

A:  The air compressor does not come with an air hose.

A:  One mine, the pressure regulator does not work. Since I use the compressor to inflate tires only and not to connect any tools (I do not have any), it does the job.

A:  That was my first take on it too. I don't know fully what these folk are doing but I treat mine like garbage. It hasn't failed me yet. It holds air and it runs like a champ.

A:  these are industrial fittings :)

A:  Thank you for your contact. We apologize for any trouble or inconvenience. On this issue, please reach out directly to DEWALT customer service. Thank you for your cooperation in this matter.

A:  I would rate them as automotive-light industrial. Excellent for home projects.

A:  Standard 1/4” fittings as far as I can tell. (NPS?) Readily fit my nail guns of different brands. 

A:  They are the industrial type. Why can’t the dewalt expert just answer the question without telling the people to contact dewalt or don’t they know The basic styles are Industrial, Automotive , Aro, and V-style.Google to learn more

A:  1/4" Factory Installed Air Fittings