Questions and Answers for DreamLine Infinity-Z 60 in. x 34 in. Alcove Center Drain Shower Kit with Shower Wall and Shower Pan in Oil Rubbed Bronze

A:  For gluing the acrylic walls to backer board, please use a construction-grade adhesive that specifically states on the packaging that it is safe for use on acrylic and ABS plastic. Many of these adhesives can be found at your local Home Depot store and they are commonly referred to as "tub surround" adhesive. Thank you for your interest in DreamLine!

A:  The 3 separate components of this kit will all ship on the same pallet. The combined weight of the 3 kit components will be 192 LBS. The pallet this kit ships on will weigh 70 LBS on its own, so the combined weight of the pallet plus all the kit items will be 262 LBS. The individual kit components will each weigh the following: Shower door = 98 LBS, Shower base = 47 LBS, Acrylic wall kit = 47 LBS. Thank you for your interest in DreamLine1

A:  The shower base that comes with this kit is a single threshold shower base, so it will have 1 threshold on the front 60" side. The "threshold" is defined as the curb of the base where you will install the shower door and the part of the base you will step over to enter the shower. The other 3 sides of the base will have tiling flanges and these sides of the base with the tiling flanges are the ones that will need to be installed against studs. Thank you for your interest in DreamLine!

A:  The heaviest component in this shower kit will be the shower door, and the box for that will weigh approximately 98 LBS. The shower base will weigh approximately 47 LBS and the wall panels are actually very lightweight because they are the type of walls that must be glued to backer board. Each wall panel will weigh approximately 8-10 LBS. Thank you for your interest in DreamLine!

A:  All rectangular-shaped SlimLine shower bases by DreamLine will have the threshold on the longer side of the base. For the 60x34" base, this will mean that the threshold is on the 60" side of the base. Thank you for your interest in DreamLine!

A:  All rectangular-shaped SlimLine shower bases by DreamLine will have the threshold on the longer side of the base. For the 60x34" base, this will mean that the threshold is on the 60" side of the base. Thank you for your interest in DreamLine!

A:  The threshold for the 60x34" base will be on the 60" side of the base. DreamLine does not offer any shower bases where the threshold will be on the shorter side of the base. Thank you for your interest in DreamLine!

A:  This kit is available with brushed nickel hardware, but you will need to change the model number to DL-6117R-04CL (Home Depot item # 1000714588) to get the version that comes with brushed nickel hardware. Thank you for your interest in DreamLine!

A:  You would have to completely uninstall the unit, then flip the frame upside-down to switch the orientation of the stationary panel. You will likely have to drill new holes to hold the glass profiles inside of the wall jambs and you will probably also need to drill a new hole for the small stationary glass holder at the bottom. You'll have to see how everything lines up and if you run into any issues, you can always purchase replacement hardware parts by calling our support team at 866-731-2244. Thank you for your interest in DreamLine!

A:  The acrylic walls that come with this kit are the type that must be glued to backer board (after they are trimmed to fit the opening). This is not a one-piece molded surround and the walls are not for direct-to-stud installation (they must be glued to backer board). The walls are thin and flat panels, so they will easily be able to fit through your doorway. Thank you for your interest in DreamLine!