Q:What materials/fittings would you need for these to go into pex b including shut off valve on hot water outlet?
by|Mar 18, 2024
1 Answer
Answer This Question
A: Hi, Momo - This kit is designed for use with IPS pipe going into the hot and cold supplies of the water heater. We suggest you check with the plumbing pro at your local Home Depot store for advice regarding pex pipe.
by|Mar 19, 2024
Q:Do I need dialectic unions to hook it up to my gas water heater
by|Mar 15, 2024
1 Answer
Answer This Question
A: Hi, Wayne - Each braided hose has a built in dielectric sleeve.
by|Mar 18, 2024
Q:Can the yellow flex gas tube connect the burner assembly stem to the electronic gas valve?
by|Jan 16, 2024
1 Answer
Answer This Question
A: Hi, Shane - Parts should be used only as directed. Please follow the instructions.
by|Jan 16, 2024
Q:Will thread on water line work on 3/4 inch galvanized pipe
by|Aug 25, 2023
1 Answer
Answer This Question
A: Yes. Be sure to follow the installation instructions and do not over-tighten. Thanks.
by|Aug 25, 2023
Q:My gas supply line is 1/2 inch. Can a reducer be used on the tank?
by|Jun 26, 2023
1 Answer
Answer This Question
A: Hi, Bruce - That's a question that would best answered by the tank manufacturer. Mechanically it may work, however, it may not be to tank specs. Best to check with the manufacturer. Thanks.
by|Jun 26, 2023
Q:What is the outside diameter of the flare?
by|May 9, 2023
1 Answer
Answer This Question
A: Hi, Gnag - If you're asking about the flare fittings that screw into the brass female fittings connected to the yellow gas line, the OD mics at .064 and tapers to an ID of .40
by|May 9, 2023
Q:Gas does that mean it works for Propane also?
by|Mar 30, 2023
1 Answer
Answer This Question
A: Yes.
by|Mar 31, 2023
Q:How long are the braide water lines?
by|Mar 28, 2023
2 Answers
Answer This Question
A: Ours is approximately 18". They come in various lengths. The package should indicate the size.
by|Apr 2, 2023
A: As noted on the Home Depot webpage, they are 18".