Questions and Answers for undefined

A:  The Hampton Bay Ceiling Fan Wall Switch (Internet #202801200 | Model #9050H) is a known compatible wall control kit for this model. However, most wall controls with three individual fan speeds will work with this fan. Please note that the included bulbs are not dimmable and you will need to install dimmable bulbs on the fan before you can use the light dimming functions.

A:  You will need to install dimmable bulbs as the original bulbs may flicker or burn out if dimmed. Incandescent bulbs and LED bulbs that are marked as dimmable are safe to use. You will also need to be sure only the blue wire from the fan is connected to the hot wire for the dimmer switch. The blue wire powers the light kit and the black wire from the fan powers the fan motor. The black wire will need to be attached to a separate hot wire that is not connected to a dimmer switch.

A:  Yes, you can find a digital manual as well as an installation video on the manufacturer's website here: https://www.tal-usa.com/pull-chain-fan-list/52-glendale

A:  The smaller diameter of the glass that attaches to the light kit socket is 2 inches and the wider diameter of the glass opening is approximately 4.8 inches. If you need to replace the glass shade you can order replacements by contacting customer service at 1-855-HD-HAMPTON.

A:  my husband said he believes that the controls for the fan are in the light fixture. you can most certainly not turn them on but you need that physical part attached to the fan

A:  Yes, but you will need to order a "switch cap" to cover the opening where the light kit is normally installed. You can order a switch cap by contacting customer service at 1-855-HD-HAMPTON and providing your fan model information.

A:  They're 5" in length

A:  Yes, all instructions and hardware for flush mounting are included in the box.

A:  NO IT CANNOT

A:  You can order a replacement glass shade and all other parts for this model by contacting customer service at 1-855-HD-HAMPTON.

A:  The canopy for this model has a 5 1/8" diameter and a 2.5" height.

A:  Yes, CFL bulbs with an E26 Medium base will fit the fan's light kit sockets and work without issue.