A: Thank you for your question. The fan can be mounted at a maximum angle of 30 degrees. If the ceiling angle is greater than 30 degrees, you will need a 45 degree canopy kit.
by|Nov 14, 2023
Q:If mounted as a flush mount, flush with the ceiling, what is the dimension from the ceiling to the very bottom of the fan and the bottom of the blades?
by|Oct 14, 2023
2 Answers
Answer This Question
A: Thank you for your question. When mounted flush, the distance from the ceiling to the blades is 10.1 inches.
by|Jan 6, 2024
1 found this answer helpful
A: It’s not able to be flush mounted. Installed 2 today and was not able to flush mount them like I wanted to.
by|Feb 27, 2024
Q:An answer on Aug. 21 2023 from Hampton Bay says this fan can be flush mounted. An answer from Hampton Bay on July 3, 2023 says this fan cannot be flush mounted. Which answer is correct, and if it can be flush mounted, what is the total height of the fan?
by|Oct 5, 2023
2 Answers
Answer This Question
A: Thank you for your question. The original Lillycrest (model 32711) is able to be flush-mounted. The distance from the ceiling to blades when flush mounted is 10.1 inches. The Lillycrest II does not have the flush mount option. Unfortunately, it seems like the questions for both versions have been combined - we apologize for any confusion this has caused.
by|Jan 13, 2024
A: I just installed 2 of them today and they cannot be flush mounted. I purchased them because they said they could be but it doesn’t have the same hanging that is shown in the installation video.
by|Jan 6, 2024
Q:Is the downrod long enough for ceiling height of 12 feet?
by|Sep 29, 2023
1 Answer
Answer This Question
A: Thank you for your question. In general, ceiling fans are recommended to be installed so that the blades are about 8ft from the floor. In general, for a 12ft ceiling, we would suggest a 24" downrod.
by|Jan 2, 2024
1 found this answer helpful
Q:How much is a light kit for this fan?
by|Aug 30, 2023
1 Answer
Answer This Question
A: Thank you for your question. The price varies depending on the model selected. To see the selection of available light kits, please search "universal ceiling fan light kit" on homedepot.com.
by|Jan 2, 2024
1 found this answer helpful
Q:What width is the downrod for the Hampton bay lillycrest ceiling fan...3/4 in?
by|Aug 29, 2023
1 Answer
Answer This Question
A: Thank you for your question. Yes, the fan uses a 3/4" diameter (inner diameter) downrod.
by|Aug 30, 2023
Q:What light kits, specifically, work with the Hampton Bay Lillycrest ceiling fan?
by|Aug 21, 2023
1 Answer
Answer This Question
A: Thank you for your question. The fan is compatible with any of the Hampton Bay universal ceiling fan light kits and most other brands. There are too many light kits to list out individually, but a couple of options would be model #91383 or #53701101. The important thing is that the light kit has a center threaded post to attach to the fan's switch cap.
by|Jan 2, 2024
5 found this answer helpful
Q:Can it be a flush mount
by|Aug 21, 2023
1 Answer
Answer This Question
A: Thank you for your question. Yes, as stated in the product feature points and the specifications sections, the fan can be installed flush without the downrod.
by|Aug 22, 2023
Q:We bought this for our open air covered deck with approximately 10-11' ceiling height. It will be mounted 6' in from each side. Are there specific light kits to consider, or would any compatible light kit be safe in this setup?
by|Aug 14, 2023
1 Answer
Answer This Question
A: Thank you for your question. The fan is compatible with any of the Hampton Bay universal ceiling fan light kits and most other brands as well. If the fan is installed outdoors, you will need a damp or wet rated light kit.
by|Aug 15, 2023
Q:Can you add a 2? down rod with this fan
by|Aug 6, 2023
1 Answer
Answer This Question
A: Thank you for your question. Yes, this fan is compatible with any 3/4" diameter (inner diameter) downrod up to 48 inches in length.