Questions and Answers for Hampton Bay Outdoor Patio Deep Seating Lounge Chair Cover (2-Pack)

A:  Yes, these will fit the swivel rockers by Hampton bay.

A:  This cover will not fit the any of the swivel rockers. Depending on the style you have, metal frame or wicker, there are a couple that come as close as you can with the height: For the metal frame: 32W 37D 36H I would try this one: https://www.homedepot.com/p/Duck-Covers-Ultimate-32-in-W-Patio-Chair-Cover-UCH323736/205577655 For the wicker frame: 40W 40D 36H I would try this one: https://www.homedepot.com/p/Duck-Covers-Ultimate-40-in-W-Patio-Chair-Cover-UCH404036/205577657?MERCH=REC-_-pipinstock-_-NA-_-205577657-_-N These are the tallest styles and I would use either if I were looking. The width and depth may be a bit more than you need, but that is never a bad thing, and can help add to the length.

A:  I can't get specs on the chairs because they don't show online, but this is a taller narrower chair, so I will say no, these covers will not be a good fit. Measure your chairs and see what you get. I think from the photo that this would work for you: 32W 37D 36H https://www.homedepot.com/p/Duck-Covers-Ultimate-32-in-W-Patio-Chair-Cover-UCH323736/205577655 If you need more room try this one: 40W 40D 36H https://www.homedepot.com/p/Duck-Covers-Ultimate-40-in-W-Patio-Chair-Cover-UCH404036/205577657?MERCH=REC-_-pipinstock-_-NA-_-205577657-_-N They are the tallest, so you are looking for the proper width and depth, and these can be a big roomy without worry.

A:  These would work fine for your chairs. They are a little deeper and wider, but the height is good, and the extra space is not a problem with these covers. I leave pillow on them sometimes and they work great! Besides that, you can't beat the quality of these covers. All the others are either too tall or way too wide. I'd say go for it!

A:  our product(1001 075 739) is 96.5 cm I*1.47 m L*78.7 cm H in, please visit the Homedepot store to check the actual size.

A:  Yes. They fit perfectly. I purchased the same 4 piece set and added the ottomans and 2 end tables. The chair covers work great for the chairs, and I push the table, end tables and ottomans in front of the couch and use the matching Hampton Bay Patio Rectangular Table with Chair Cover to cover the rest of the pieces and it works perfectly! The weight and quality is very good and I stow them inside the tables when they are not in use.

A:  Yes, these should work for your chairs. The covers are sturdy, have vents to allow evaporation, and convenient handles sewn in for easy handling. My chairs are about 36" square, so your chairs are smaller.

A:  These are 8" deeper than you chair dimensions, however I think you would still appreciate the look of these covers. The small amount of oversize you would have would be fine as the way these are finished, you can adjust them to your chair size quite nicely. The quality and weight is excellent, and I would recommend these for any chairs that are close.

A:  NOOO... these will not fit a Swivel/ Rocker.... there are NO legs on the Swivel/ Rocker so the cover will not attach to it....

A:  The size of this product is 31.5inW*38.5inL*29inH. For other specific questions, please go to HD store for inquiry. Thank you!

A:  The size of this product is 38inW*58inL*31inH. For specific questions, please submit to HD store for inquiry. Thank you!

A:  yes, I had both types of chairs & they work well

A:  No they did not fit properly and were short at the bottom of the chair. I went to ace hardware and found covers that fit perfectly. They were more expensive at Ace, but the quality of the fabric is much better and the fit is just right. Go figure!!!

A:  The size of this product is: 31.5inW*38.5inL*29inH, For other specific questions, please go to HD store for inquiry. Thank you!

A:  It may be too big. It fit perfect over our chairs. There is a pull cord and elastic to make it smaller on the bottom so it may be OK but look awkward.

A:  No, this is not a fit for Adirondack chairs. I bought the Hampton Bay Patio Chaise Cover for my Adirondacks because they drop down to near chaise level with footrests and the fit is fine to me. I wanted to match the other covers, so I was happy with the fit not being perfect. If you don't have other covers in this design you may want to look further for actual Adirondack chair covers for a proper fit.

A:  So the chairs I covered are 27" across the back of chair. It is 33" tall & 32" deep going from seat to back of the back on chair. It is not tight on my chair like it shows in the picture. It fits very nicely & provides good protection.

A:  The dimensions of the product are as follows: 38.50 x 29.00 x 31.50 inches.