Questions and Answers for Hunter Dempsey 52 in. LED Indoor/Outdoor Matte Nickel Ceiling Fan with Light and Remote

A:  Call the customer service line and ask if they have a replacement part. They were able to provide us parts for a light that was lost during installation.

A:  Hello Casey, The glass globe with service part number (K545101045), can be found at the link below. https://bit.ly/2FiMzod Thank you!

A:  You can buy this fan with a light or without a light. There does not appear to be a kit to add lights.

A:  Hello Alycia, We will gladly look into this for you. If you can please message us at social@help.hunterfan.com, so that we can gather some additional information to further assist you.   Thank you, Hunter Fan Company!

A:  Just a heads up- the light it came with is very dim. Not sure if the add on kit has the same issue.

A:  Hello Biagio, We are sorry to hear that you feel that the wrong answer was provided. We have 3 types of motors: AC, DC and WhisperWind. This Dempsey model has a WhisperWind type of motor. Thank you for contacting us!

A:  Hello Biagio, The motor type for this Dempsey model is the WhisperWind design. Thank you!

A:  Hello JCBravo, The correlated color temperature of the included bulbs is 3000. Have a great day!

A:  3000k. The included blubs are dimmable LED but mine buzzed so I replaced them with my own.

A:  Hello colorado242, Brushed Nickel has a lighter Nickel tone and Matte Nickel has a slightly darker Nickel tone. Brushed Nickel would be closest to a Stainless Steel finish. Thank you for contacting Hunter Fan Company!

A:  The matte nickel will have no sheen to it, whereas, the brushed nickel has a slight sheen.

A:  Yes, ours is on an angled ceiling.

A:  Hi soniabc, Yes, the Dempsey model, 59217, can be installed on an angled ceiling. For optimum performance and appearance, a longer down rod should be used when installing on a high or angled ceiling. If your ceiling is angle is greater than 34°, you will also need an Angled Mounting Kit. Longer down rods and the Angled Mounting Kit are sold separately at the links below. Thank you for contacting Hunter Fan Company! https://thd.co/2FWIndk https://thd.co/2rqJj5A

A:  Yes, but you will need to buy a longer downrod for it. There were several lengths in stock at my H Despot. I put mine on a 2/12 ceiling.

A:  Yes, the Dempsey model, 59217, can be installed on an angled ceiling. For optimum performance and appearance, a longer down rod should be used when installing on a high or angled ceiling.

A:  Not sure. All our applications were for a flat ceiling. Very pleased with fans, very quiet

A:  We did not have an angled ceiling. We only installed on a ceiling completely parallel to the floor.

A:  No, this model cannot be wired to a single pole.

A:  Hello Fanimaniac, No, the Dempsey model is manufactured to be installed/wired to a dual pole. Thank you!

A:  Yes you can bypass the remote. From the fan the black wire is fan control and blue wire is light control.

A:  Hello MBSMJS, No, the Dempsey model is only manufactured to be operated with the provided remote control. Have a great day!

A:  Hello robzhou, No, since the Dempsey model is not manufactured with pull chains, you will need to use the included remote control to operate the fan speeds and lighting. You would need to purchase a Hunter model fan with pull chains if you want to operate the fan from your wall switches. Have a great day!

A:  Yes you can bypass the remote. From the fan the black wire is fan control and blue wire is light control.