#1 Home Improvement Retailer

Questions and Answers for Husky 3/8 in. Drive Electronic Torque Wrench

Internet #314020528

Model #H3DETW

Store SKU #1005589774

  • Electronic torque wrench with a 20 ft./lbs. to 100 ft./lbs range
  • Torque accuracy of plus/minus 2% CW and plus/minus 3% CCW
  • Solvent resistant dual material comfort grip

Questions & Answers

25Questions
caret
Q:If you go over the set torque that is wanted, will the lcd show the actually torque reading or will it just show the torque amount that was set.?
by|Jul 6, 2021
1 Answer
Answer This Question

A:  Jim, The screen will show the live torque readout as torque is applied and in Peak Torque mode will flash the highest applied torque value for 10 seconds before the screen returns to the pre-set amount. This allows you to verify the correct torque was applied to the workpiece each time.

by|Mar 18, 2023
    caret
    Q:Are you sure the range is 10-100 lbs ft? the product image shows 20-100 lbs ft on the packaging, but the manual is stating 10-100. Not sure which one to believe...
    by|May 31, 2021
    3 Answers
    Answer This Question

    A:  I thought it was 20-100 but you can set it from 10-100 ft-lbs. It just might be certified for 20-100 ft-lbs.

    by|Jun 13, 2021

    A:  It definitely goes down to 10 ft-lbs and the target Peak Torque setting goes above 200 ft-lbs. It is only 16" or so long--I doubt you can get enough leverage to go much above 100 ft-lbs unless you eat spinach and have arms like Popeye the Sailor. The menu will take you above 300 ft-lbs.

    by|Jul 1, 2023
    1 found this answer helpful

    A:  Ken, The wrench will operate in the 10-100 ft./lbs. range. As is standard with torque wrenches, the wrench is calibrated to be accurate +/-2% in the upper 80% of its range, which would be from 20-100 ft. lbs.

    by|Jun 22, 2021
      caret
      Q:I see a couple of questions on warranty for this item. Is it covered by the Husky Lifetime Warranty for torque wrench and 1 year for calibration. Does anyone that have this tool can speak to its accuracy and reliability. Is this a good torque wrench.
      by|Apr 8, 2021
      3 Answers
      Answer This Question

      A:  Yes.

      by|Jun 18, 2021

      A:  Does it do degrees as well

      by|Sep 5, 2022

        A:  JD, This professional-grade Torque Wrench is covered under a Limited Lifetime warranty, If this Husky product ever fails due to a defect in material or workmanship, return the product to any Home Depot retail store for replacement with an item of equal or greater value. The factory calibration card is good for 1 year after the purchase date.

        by|May 17, 2021
          1 found this answer helpful
          caret
          Q:What is the warranty
          by|Mar 17, 2021
          1 Answer
          Answer This Question

          A:  Rigo, This torque wrench is covered by a Limited Lifetime Warranty: If this Husky product ever fails due to a defect in material or workmanship, return the product to any Home Depot retail store for replacement with an item of equal or greater value. The calibration of the wrench is good for 1 year after purchase. This warranty does not cover damage caused but misuse or abuse of the tool.

          by|May 17, 2021
            1 found this answer helpful
            caret
            Q:What about the inch/lbs. !! Nobody ever lists those in their descriptions. It is awful.
            by|Mar 5, 2021
            2 Answers
            Answer This Question

            A:  This Husky 3/8" Electronic Torque Wrench can be set for in-lbs. It also does Ft-lbs, Nm, Kg-m and Kg-cm. It also functions as a very accurate angle finder. You can set angle alarms the same way as torque alarms.

            by|Jun 20, 2021

            A:  The inch pound range for this wrench is 120 to 1,200 in./lbs. Quick tip for the inch pound conversion, just multiply ft./lbs. by 12 to get the in./lbs.

            by|Aug 19, 2022
              4 found this answer helpful
              caret
              Q:What's the torque range ? That might be important to list in the description ....
              by|Feb 16, 2021
              4 Answers
              Answer This Question

              A:  Chris, The range on this wrench can be set between 10 and 100 Ft./Lbs.

              by|May 17, 2021
                2 found this answer helpful

                A:  10 - 100 FT/LBS.

                by|Jun 18, 2021

                A:  The torque settings go down to 10 ft-lbs and above 100 ft-lbs. This is only a 16" long torque wrench and I doubt ordinary people will be able to pull more than 100 ft-lbs on that. The menu goes much higher than that. The packaging states 10 to 100 ft-lbs.

                by|Jun 20, 2021

                A:  Just noticed that the box says "20-100 FT/LBS," but the Instruction Sheet says "10-100 FT/LBS."

                by|Jun 18, 2021
                caret
                Q:States “1 year warranty” on product list- however states “lifetime limited with equal or greater value” in pdf booklet. Which is it?
                by|Feb 9, 2021
                1 Answer
                Answer This Question

                A:  Hello, This Electronic Torque Wrench is covered by a Limited Lifetime Warranty: If this Husky product ever fails due to a defect in material or workmanship, return the product to any Home Depot retail store for replacement with an item of equal or greater value.

                by|Feb 22, 2021
                  1 found this answer helpful

                  Frequently Bought Together

                  Exclusive
                  +
                  +
                  Price:
                  $174.00

                  Compare Similar Items

                  current item

                  Individual/Set

                  Individual

                  Individual

                  Individual

                  Individual

                  Maximum Torque (ft.-lb.)

                  100

                  20.8

                  75

                  250

                  Features

                  Angle, Digital, Low Profile, Reversible

                  Calibrated, Click, Low Profile, Micrometer, Reversible

                  Calibrated, Flex Head, Low Profile, Micrometer

                  Calibrated

                  Wrench length (in.)

                  15.75

                  18.25

                  27.480

                  10.625