Questions and Answers for Impact Plus 47 in. x 80 in. Beveled Edge Mirror Solid Core MDF Interior Closet Bi-Fold Door with White Trim

A:  No, it will not work with a 59 1/2 inch door.

A:  Dear banana, Yes this door is designed to fit into a 59" finished opening.

A:  Betty, Unfortunately no since they are bifolding doors. If you want to discuss a solution please reach out and sales@paniflex.com. Thank you

A:  Steve, Yes. Please reach to us directly at sales@paniflex.com with some basic info like where you are located and a number or email we can reach you at and maybe a photo or 2 of what we are looking at. We have a few options depending on where in the country you are. Thank you. Carlos

A:  Martin, It wll be close on the width but you shuld be OK as long as there are no other issues with your opening. The adjustability will be at the max for smaller openings. The height will be fine you will have a little extra gap on the very bottom due to the extra height but you most likely will never notice it. Thank you.

A:  Dear Martin, You will be at the smallest tolerances allowed so theoretically it should work but there is zero margin for error for minor variances in your opening. Your tolerances will be very tight and there may be a chance if you have any variations in your opening that the door will bind. The height will work. Your best option is to send us a note with you actual finished opening at sales@paniflex.com and we can get you a quote on a custom-sized unit for your opening. Thank you.

A:  Dear Loretta, the 78" x 80" will not work in your 80^ wide opening. Technically it would fit but you would have 1 inch gaps on each edge/side that you would need to cover up with some type of molding. You could also reach out to us at sales@paniflex.com and we can quote you on a special size unit. Thank you.

A:  Dear Carlos, Over time the ammonia will react with the silver nitrate in the mirror coating and will create blackish looking spots or dark discoloration, especially near any esposed edges. Thank you.

A:  No, it will not fit.

A:  Vic, It will be a close call. Your measurement is at the lowest point of our normal adjustability so there will be no more margin for error if you have an out-of-square or un-even wall situation. If your opening is square and floor and walls are all pretty level then I would say go for it. If not your best option would be to reach out to us at sales@paniflex.com and we can look into the cost of a custom sized door. Thank you.

A:  We use "finished opening" as our measurement since it goes into an existing framed opening. 80"

A:  Its rough opening height is 80".