Q:Is there a bottom track on this door? I don't want one as I can't imagine the amount of dirt that it will catch and I don't want the possibility of stepping on a track. (ouch) So, does it have a track and if it does must it be used?
by|Aug 5, 2024
1 Answer
Answer This Question
A: Cbharis, It has an "optional" bottom oak saddle. Depending on your floor materials you can usually mount the floor plate directly on the floor and skip the saddle. I hope this answers your question.
by|Aug 14, 2024
Q:The existing opening of the closet I have is 72 1/2x80 7/8. Would this fit the height properly?
by|Mar 24, 2024
1 Answer
Answer This Question
A: Adam, Yes You will just have a little extra gap to distribute evenly between the top and the bottom and from side to side. Most folks dont really care about the slightly larger gaps on the sides and bottom since the alternative is a more costly custom-sized unit. You can either leave the sides alone or cover it up with a simple quarter round or square molding running from top to bottom. Thank you to your question.
by|Apr 15, 2024
Q:Is it mirrored on both sides so could be used for a bathroom or closet door
by|Dec 30, 2023
1 Answer
Answer This Question
A: Nancy, Its mirrored only on one side and is really only designed to be used as a closet door, not a "passage" door. Thank you.
by|Feb 16, 2024
Q:My closet door width opening is 58.75 inches. Will the 59 inch Impact Plus Closet Bi-Fold Door fit? I have previously installed Impact Plus 71 inch Closet Bi-Fold and have a 0.5 inch gap. So if I install a 59 Closet door would it close without any gap?
by|Dec 27, 2023
1 Answer
Answer This Question
A: Our door are adjustable but thats out of the range. It sounds like you have a custom size and this unit will not fit in your opening out of the box. Please reach out to us at Sales@CustomDoorandMirror.com if you are interested in seeing if we can get you the custom size. Thank you. Carlos
by|Feb 16, 2024
Q:Does the installation hardware come with the mirror solid core doors
by|Nov 10, 2023
1 Answer
Answer This Question
A: Nick, Yes. Everything you need is provided with the door to install this unit into your 48" x 96" finished opening. You will just need to bring some common tools and basic skills. Thank you.
by|Nov 29, 2023
Q:My rough opening is 46.25. Will 47x80 sized door work/fit?
by|Oct 23, 2023
1 Answer
Answer This Question
A: Maxx, We use "finished opening" and not rough opening. Is this case if you are referring to the finished opening as 46.25, then this door likely won't work. Mathematically it may fit into the opening but it won't have the clearances necessary for adjustability or smooth operation. Please reach out to us at Sales@CustomDoorandMirror.com if you are interested in seeing if we can get you a custom size. Thank you. Carlos
by|Oct 28, 2023
Q:What is the width of the bottom track? The spec sheet drawing shows 1 7/6 Is that supposed to be 1 7/8 or 1 7/16
by|Oct 3, 2023
1 Answer
Answer This Question
A: Mark, The width of the bottom track is 2.5" wide. Not sure what spec sheet you are referring to. Please reach out to Sales@CustomDoorandMirror.com if you have additional questions.
by|Oct 28, 2023
Q:I have a 72 by 80 closet door opening, currently there are 2 bifold mirror doors there that need replacement. Can I use two sets of the 36 by 80 to replace them?
by|Jul 2, 2023
2 Answers
Answer This Question
A: Yes, you may just hinge one door to the left side and one to the right side of the closet.
Mike
by|Jul 3, 2023
A: xgrishkax, Yes, 2-36" units will work for you but just a quick word of advice...If you order 2-36" units, you will have 2 pieces of 36" track, but if you order a 72" unit, you will have one continuous track, and many customers prefer that look, rather than having a seam in the middle. Thank you.