A: JELD-WEN only recommends cutting a quarter of an inch off each edge of the door. While you may choose to trim your door, please note that requests for warranty services could be denied depending on the circumstances affecting product performance. We may be able to provide a custom size to fit your door space, please see your local Home Depot store for ordering and availability. Thank you for letting us assist you.
by|Jul 14, 2022
1 found this answer helpful
A: No
by|May 20, 2021
Q:can these doors be trimmed 8 to 10 inches (length) for basement application under duct work?
by|Dec 28, 2020
1 Answer
Answer This Question
A: You could trim about 5,5” off the bottom below the hinge, maybe 6”. You could trim the same amount off the top above the hinge, but not sure if you could reattach the hardware that’s attached to the top for hanging the door.
by|Dec 29, 2020
Q:What if the rough opening side to side is 70 & 3/4" ?
by|May 18, 2020
1 Answer
Answer This Question
A: Dear Valued Home Depot Customer, To better answer your question, please contact our HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question.
by|Jun 26, 2020
Q:The top with my door is 35 3/4 top is 35 7/8. The top length is 80 1/4 to 80 1/2. Will this door fit??
by|May 12, 2020
1 Answer
Answer This Question
A: For the 36 in. x 80 in. Continental Primed Smooth Molded Composite MDF Closet Bi-Fold Door you need an opening of 36-1/2 x 81-1/2 to accommodate the hardware needed for installation. Thank you for your inquiry.
by|May 14, 2020
Q:Can this door fit an opening that is 31 3/4" W.
by|Mar 23, 2020
1 Answer
Answer This Question
A: The JELD-WEN 32 in. x 80 in. Continental Primed Smooth Molded Composite MDF Closet Bi-Fold Door will fit an opening of 32x80. Please visit your local HOME DEPOT for special ordering and regional availability. Thank you for your question
by|Mar 23, 2020
Q:What are the boxed dimensions of this door?
by|Feb 18, 2020
1 Answer
Answer This Question
A: Dear Valued Home Depot Customer, To better answer your question, please contact our HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question.
by|Feb 21, 2020
Q:Is it hollow core
by|Jan 14, 2020
2 Answers
Answer This Question
A: It is hollow core. It makes for a problem installing any knobs other then the cheap wooden ones that comes with it. I installed fancy knobs and could not tighten them because the doors starting pulling in at the center.. Would have been nice if they placed a block inside the center so you could use better knobs.
by|Jan 14, 2020
A: The JELD-WEN 24 in. x 80 in. Continental Primed Smooth Molded Composite MDF Closet Bi-fold Door is hollow core. Please contact your local Home Depot store for ordering and availability. Thank you for letting us assist you.
by|Mar 10, 2024
1 found this answer helpful
Q:Can these be trimmed?
by|Dec 22, 2019
1 Answer
Answer This Question
A: Yes, it can be trimmed.
by|Dec 27, 2019
Q:Can doors be ordered for fit? 77” T X 57 W.
by|Dec 12, 2019
1 Answer
Answer This Question
A: JELD-WEN may be able to provide a custom order to include the Continental Primed Smooth Molded Composite MDF Closet Bi-fold Door in the size you are looking for. Please see your local Home Depot store for ordering and availability. Thank you for letting us assist you today.
by|Dec 19, 2019
Q:Can these be trimed?
by|Nov 16, 2019
2 Answers
Answer This Question
A: JELD-WEN only recommends cutting a quarter of an inch off each edge of the door. While you may choose to trim your door, please note that requests for warranty services could be denied depending on the circumstances affecting product performance. We may be able to provide a custom size to fit your door space, please see your local Home Depot store for ordering and availability. Thank you for letting us assist you.