Q:Is this a true double pole in that the 2 poles are isolated from each other? Are the 2 poles made and broken with a single throw or is it a double throw?
by|Nov 25, 2022
1 Answer
Answer This Question
A: Double pole, single throw.
by|Jul 2, 2023
Q:I have a 240v heater, that is turned off and on by a switch will this work for that?
by|Jan 29, 2020
1 Answer
Answer This Question
A: Yes, provided that the heater doesn't require more than 20Amps.
by|Jan 29, 2020
Q:Is this a 4-way switch?
by|Jan 13, 2020
1 Answer
Answer This Question
A: Yes, this is a 4 way switch.
by|Jan 14, 2020
Q:is this a momentary on switch?
by|May 8, 2019
1 Answer
Answer This Question
A: Hi,
Thank you for choosing Leviton. No this is a maintained contact double pole switch.
by|May 9, 2019
Q:I want to connect a GFCI outlet to this DPST switch. The DPST switch will control a series of LED lights. I currently have a SPST switch but when the switch is in the off position, the LED lights have a faint glow because of inductance I think. One sight suggested using a DPST switch which would prevent the LEDs from glowing. My question is how do I wire the switch?
by|Mar 12, 2019
3 Answers
Answer This Question
A: The wire to your LED lights probably has a black (hot), white (neutral) and bare (ground) wire. Normally the black wire is the one switched. I would check to make sure that's the case first. It would be bizzare to switch the neutral, but if that is the case, it could be the cause of your glow. Inductance could occur if the wire runs parallel to another that has an live wire in it.
If you have any doubts, the best thing would be to get an electrician in there to diagnose the problem.
by|Mar 14, 2019
A: You have two wires going to the lights, a hot (black) and a neutral (white). One pole of the switch switches the hot, the other the neutral.
by|Jan 29, 2020
A: I would not use a double pole switch for this application. It will work, but it's entirely unnecessary. As for the faint glow, is the source ("hot") going through the switch or are you switching the neutral off? Is the present switch illuminated?
by|Nov 12, 2019
Q:I have two of these switches on one electrical outlet cover--one for the overhead light and one for the garbage disposal. Unfortunately, the one for the garbage dis. went out and I had a plumber come and charge $110 only to discover the problem was solely in the switch. Do I need to just replace one or both of the switches under that cover? Is is difficult to do yourself?
Thanks,
Dora
by|Jun 21, 2017
4 Answers
Answer This Question
A: Pretty expensive switch for what you're saying they're used for. You can use a single pole switch for the overhead light and a single pole switch for the garbage disposal. They're much cheaper. If you're comfortable with electrical work, it's pretty easy to change. You only have to change the switch that is giving you problems. However, you might want to make sure it's wired correctly. This switch has four terminals (not counting ground) and you only need two of them. You have to have the correct two though.
by|Nov 12, 2019
A: This isn't the correct switch for lighting or a garbage disposal. If you have ANY doubt in what you are doing, call an electrician.
by|Jan 29, 2020
A: You would most likely only need to replace the one switch that was controlling the disposal. If you're comfortable wiring electrical devices, and you have a wire tester, I suggest you call Leviton's Tech Support at 1-800-824-3005.
by|May 4, 2023
A: I highly doubt that *this* switch is what you have in your switch box. For a light and a garbage disposal, all you need is a pair of **single** pole switches, unless your garbage disposal is unique and runs on 220v. This particular double-pole switch is normally used to switch 220V devices that have (2) two hot wires, typically black and red.
Replacing a switch is not difficult to do. Remember to turn off the power to the switch box first. If you have any doubts at all, get an electrician in there to do the job.