Q:Bought these to replace a couple of broken hinges of the same type. Now the door won't close all of the way. Did I do something wrong?
by|Feb 22, 2022
4 Answers
Answer This Question
A: Hello BobHoff
I don't think you've done anything wrong. I was able to install the same hinges as replacements to old hinges. You may try un-tightening the hinges to confirm closure, and if this works, you may want to ensure that the hinges are correctly aligned before tightening the hinges.
Good luck, and I hope this helps.
by|Jan 28, 2023
1 found this answer helpful
A: This is overlay hinge for cabinet door with rabbit edge. You probably need hinge without allowance for inset
by|Mar 20, 2024
1 found this answer helpful
A: BobHoff, Thank you for taking the time to comment. We are committed to providing safe, quality products that meet or exceed government and industry standards. We’re sorry to hear that you were not fully satisfied with our product. To better assist you with your specific application, please know that our Customer Care Specialists are available to offer any assistance with installation or to address any concerns you may have. They are available Monday – Thursday 8:00 a.m. to 5:00 p.m. EST and Friday 9:00 a.m. to 5:00 p.m. EST and can be reached at 800-635-2731 or by email at customersolutions@libertyhardware.com. Best, Customer Care Team
by|Jan 3, 2023
A: I did exactly the same as you, ie. buying hinges that look the same as you did to replace failing ones on some cabinets. My experience was exactly the save. The new hinges did not allow the cabinet doors to close fully. In the end I just gave up and the cabinets still have the old hinges on them. Will not buy them again
by|Feb 24, 2022
Q:What is the distance between the three holes on the plate that attaches to the cabinet door?
by|Feb 15, 2022
2 Answers
Answer This Question
A: I inch space from top to bottom hole and 3/4 inch space between the other 2
by|Jul 31, 2022
1 found this answer helpful
A: Linda, Thank you for your question. The vertical distance between the 'middle' hole and the 'top/bottom' holes is 11.9mm (`7/16"), and the horizontal distance is 12.7mm (1/2"). I hope this is helpful. Best, Customer Care Team
by|Feb 23, 2022
Q:If I make a custom made door, what would the thickness have to be
by|Feb 13, 2022
1 Answer
Answer This Question
A: Pete, Thank you for your question on the Liberty Matte Black Self-Closing Overlay Cabinet Hinge (5-Pairs). There ae a few things to consider. Please know that our Customer Care Specialists are available to offer any assistance with installation or to address any concerns you may have. They are available Monday – Thursday 8:00 a.m. to 5:00 p.m. EST and Friday 9:00 a.m. to 5:00 p.m. EST and can be reached at 800-635-2731 or by email at customersolutions@libertyhardware.com. Best, Customer Care Team.
by|Feb 20, 2022
Q:How much weight can this support?
by|Jan 21, 2022
2 Answers
Answer This Question
A: Thank you for your question. To better assist you with your specific application, please know that our Customer Care Specialists are available to offer any assistance with installation or to address any concerns you may have. They are available Monday – Thursday 8:00 a.m. to 5:00 p.m. EST and Friday 9:00 a.m. to 5:00 p.m. EST and can be reached at 800-635-2731 or by email at customersolutions@libertyhardware.com. Best, Customer Care Team
by|Jan 22, 2022
A: It handles our large oversized kitchen cannot doors easily
by|Mar 19, 2024
1 found this answer helpful
Q:Will these rust if use in an outdoor kitchen?
by|Oct 29, 2021
1 Answer
Answer This Question
A: Thank you for your question on the Satin Nickel Self-Closing Overlay Cabinet Hinge. These have not been tested for outside use. Over time they will rust being used outside. Best, Customer Care Team
by|Dec 17, 2021
Q:Does this item include bumpstops (bump stops)?
by|Aug 19, 2021
2 Answers
Answer This Question
A: No.
by|Aug 25, 2021
A: Yes inside pack.
by|Aug 5, 2024
Q:What size are the screws in the package for the 3 hole door mount? I need to drill new holes into the doors and need to know what size drill bit to use for starting pilot holes. Thanks
by|May 25, 2021
1 Answer
Answer This Question
A: SJ, Thank you for your question on the Liberty Matte Black Self-Closing Overlay Cabinet Hinge. The included screw size for the door mount is #6 x 1/2" Flat Head Phillips Wood Screw. Manufacturer installation instructions state using a screwdriver to fasten the hinges to the door and cabinet. Best, Customer Care Team
by|May 26, 2021
Q:What are the screw sizes (#6, #8, etc.)?
by|Apr 18, 2021
1 Answer
Answer This Question
A: Thank you for your question on the Liberty Antique Brass Self-Closing Overlay Cabinet Hinge. The screw sizes are #6 x 1/2" Flat Head Phillips and #6 x 5/8" Oval Head Phillips. Best, Customer Care Team
by|Nov 16, 2023
3 found this answer helpful
Q:Hi I've had these hinges for about a year, and a couple are starting to squeak. Can they be lubricated with anything to stop the squeak? I know there is a plastic piece behind the hinge, and I don't want to damage it
by|Apr 18, 2021
3 Answers
Answer This Question
A: Mike, Thank you for your question. Please know that our Customer Care Specialists are available to offer any assistance with installation or to address any concerns you may have. They are available Monday – Thursday 8:00 a.m. to 5:00 p.m. EST and Friday 9:00 a.m. to 5:00 p.m. EST and can be reached at 800-635-2731 or by email at customersolutions@libertyhardware.com. Best, Customer Care Team
by|Feb 3, 2024
A: There are plastic/rubber friendly silicone sprays available at auto parts stores. Home Depot may have them as well.
by|Nov 16, 2021
A: A little 3 in 1 oil sure couldn't hurt It's worth a try.
by|Apr 19, 2021
Q:What is the measurement between the two outside screws?
by|Apr 16, 2021
2 Answers
Answer This Question
A: Hey there, the screw holes are about 2 1/4" or 57 mm apart. Hope that helps
by|Aug 30, 2023
A: Thank you for your question on the Liberty Chrome Self-Closing Overlay Cabinet Hinge (1-Pair). The center to center of the screw holes is 54 mm. Best, customer Care Team