Questions and Answers for Loctite PL Concrete Crack and Masonry 10 oz Polyurethane Sealant Limestone Cartridge (each)

A:  Thank you for the question. Loctite PL Concrete Non-Sag Polyurethane Sealant is suitable for sealing joints around flagstone and concrete.

A:  This product is self leveling. It will not do well on vertical joints. It will just drip down

A:  Thank you for the question. Loctite does not speak to using Loctite PL Concrete Non-Sag Polyurethane Sealant for roof repair situations, as described. This is not to say you cannot try, and it is possible it may work depending on the nature of the crack, and understanding you would be responsible for your results.

A:  Thank you for the question. The Loctite PL Concrete Non-Sag Polyurethane Sealant works best when surfaces ate clean and dry. Applying to damp surfaces can be done depending on the nature of the project but substrate surfaces should never be soaking wet.

A:  Thank you for the question. Loctite does not speak to using any of its products for radon sealing. However, in general, polyurethane sealants such as Loctite PL Concrete Non-Sag Polyurethane Sealant may be used for this purpose.

A:  Thank you for the question. Loctite PL Concrete Non-Sag Polyurethane Sealant may not be bond well to acrylic, over time, depending on how much surface area is available. You may need to use an alcohol wipe to help improve adhesion. Unfortunately, there are no guarantees of longevity for this intended use with plastics.

A:  Thank you for the question. Unfortunately, Loctite PL Concrete Non-Sag Polyurethane Sealant does not accept stains very well when cured. This is not to say you cannot try but there are no guarantees of success.

A:  I used this product for stress cracks due to settling and expansion. These stress cracks are on the foundation wall. So they are above grade. Use of this product below grade i can’t advise because I don’t have any point of reference. Sorry.

A:  Thank you for the question. Yes, Loctite PL Concrete Non-Sag Polyurethane Sealant can be used for this purpose

A:  Thank you for the question. Loctite Concrete Non-Sag Polyurethane Sealant is a flexible, soft material and not considered a sandable product. When cured it will be extremely difficult to sand if not impossible and will clog any sanding product used in the process.

A:  Thank you for the question. Loctite Concrete Non-Sag Polyurethane Sealant can be used for this purpose depending upon if you have a cementitious stucco, and the nature of the cracks. This sealant is not intended to be smeared beyond the crack edges when used as directed.

A:  Thank you for the question. Loctite PL Concrete Non-Sag Polyurethane Sealant can be used for this application (with backer rod) depending upon what may have been used previously. For more detailed information on how to use the product please visit our website at www.loctiteproducts.com and see the product Technical Data Sheet.