Questions and Answers for Lucida Surfaces MosaiCore Noir 28 MIL x 12 in. W x 10 in. L Glue Down Waterproof Vinyl Tile Flooring (12.3 sqft/case)

A:  We do not recommend for MosaiCore to be grouted. The product is groutable if our customers choose to do so but if grouted it will void the warranty on the product.

A:  If this is pertaining to an attic or similar type of installation, we would not advise using this material unless there is a functioning HVAC at all times.

A:  You should not install this product over OSB. You would need to secure a new, 1/4 inch piece of interior grade plywood to the OSB and then install the MosaiCore on top of the new interior grade plywood so it can properly and evenly adhere.

A:  Yes, this is a luxury vinyl tile.

A:  We do not recommend using any grout with our products. While we have seen great results, it does void the warranty and is not recommended.

A:  Yes, you can use this as a bathroom floor. The subfloor should be stripped of any waxes and coatings and a proper subfloor must be in place that is flat, level, and even so that the MosaiCore may properly adhere.

A:  Yes it can be, the sheet vinyl must be totally fastened to the subfloor, and the MosaiCore should be glued down to the sheet vinyl floor with a pressure sensitive adhesive. The sheet vinyl floor should be stripped of any waxes or coatings before gluing the product down.

A:  The two brands we recommend are the ParaBond pressure sensitive adhesive and the Roberts Universal pressure sensitive glue, the 7350 is the model number we recommend.