#1 Home Improvement Retailer

Cart

Cart

Home
Tools
Power Tool Accessories
Power Tool Battery Chargers

Questions and Answers for Makita 18V Lithium-Ion Dual Port Rapid Optimum Charger

Internet #205664269

Model #DC18RD

Store SKU #1001163951

18V Lithium-Ion Dual Port Rapid Optimum Charger
(282)Questions & Answers (97)
  • Simultaneously charges 2 batteries
  • Built-in chip controls current, voltage and temperature
  • Built-in fan cools the battery for faster charging
View Full Product Details

Questions & Answers

97Questions
caret
Q:How long can I leave a battery on the charger? Days? weeks?
by|Jan 18, 2021
2 Answers
Answer This Question

A:  Thank you for your question. Makita recommends that after charging is complete, you should remove the battery cartridge from charger and unplug the charger. Call the Makita Call Center during business hours at (800)4-MAKITA, they’re based in Buford, GA and are ready to help.

by|Jan 20, 2021

    A:  It charges two 5Ah bats simultaneously in 45min. Just pull them off. Li-ion shouldn't be stored long-term at 100% anyway. But I guess someone could. The makita brand makes a fairly smart charger.

    by|Jan 20, 2021
    caret
    Q:Is it possible to install a dust port on it?
    by|Dec 29, 2020
    2 Answers
    Answer This Question

    A:  I don’t see how you could install one.

    by|Jan 3, 2021

    A:  Thank you for your question. The XSR01Z rear handled circular saw has a 1" OD dust port on the blade case.

    by|Dec 29, 2020
      caret
      Q:Hello, i am writing for assistance in location of the position on the saw where the blade wrench is stored, please include a picture of location of the wrench in its stored position if possible thanks
      by|Dec 16, 2020
      2 Answers
      Answer This Question

      A:  Thank you for your question. The XSR01Z 18V LXT 71/4 Circular saw does not have an onboard wrench storage. You can see more detailed pictures of the XR01Z cordless rear handle 7 1/4 circular saw at https://www.makitatools.com/products/details/XSR01Z.

      by|Dec 12, 2022
        1 found this answer helpful

        A:  The blade does NOT store on the tool.

        by|Jul 9, 2021
        caret
        Q:Is this saw suitable for use to cut light gauge (cold rolled) steel like studs and track (12 ga or thinner) if it is set on the lowest speed setting and equipped with an appropriate ferrous cutting blade?
        by|Dec 16, 2020
        1 Answer
        Answer This Question

        A:  Thank you for your question. The XPS01Z (36V) 6‑1/2" Plunge Circular Saw is suitable for cutting large wood panels, other wood materials including melamine and MDF, aluminum, and Corian, Makita does not recommend using accessories or attachments other than those specifically made for the tool being used. Please refer to your instruction manual for other compatibility questions.

        by|Dec 23, 2020
          caret
          Q:The saw indicates it is variable speed down to 2500 RPM. At Low RPM would this saw be suitable for cutting light gauge cold rolled steel (12 ga. ~.097 inch thick) studs/track
          by|Dec 15, 2020
          1 Answer
          Answer This Question

          A:  Thank you for your question. The XPS02Z (36V) 6‑1/2" Plunge Circular Saw is suitable for cutting large wood panels, other wood materials including melamine and MDF, aluminum, and Corian, Makita does not recommend using other accessories, other than those specifically made for the tool being used. Please refer to your instruction manual for other compatibility questions.

          by|Dec 16, 2020
            caret
            Q:How to order rip fence? My kit didn’t come with thumb screw (80) and parts diagram doesn’t show rip fence. I would like to order both. Thank You
            by|Nov 14, 2020
            1 Answer
            Answer This Question

            A:  Thank you for your question. Your best option is to contact the Call Center during business hours at (800)4-MAKITA. Representatives are based in Buford, GA and ready to help.

            by|Nov 16, 2020
              caret
              Q:How can i order a rip fence and locking knob?
              by|Nov 14, 2020
              1 Answer
              Answer This Question

              A:  Thank you for your question. Your best option is to contact the Call Center during business hours at (800)4-MAKITA. Representatives are based in Buford, GA and ready to help.

              by|Nov 16, 2020
                caret
                Q:Will this charge two of the newer 6 amp (18volt) batteries? The video only shows powering up to 5amps. Thanks
                by|Nov 10, 2020
                1 Answer
                Answer This Question

                A:  Thank you for your question. Yes, the DC18RD will charge 2 of any of our 18v LXT Lithium-Ion batteries.

                by|Nov 11, 2020
                  caret
                  Q:Can you use only 1 battery at a time,in the sawzall, or do you have to have 2 batteries in for it to work.
                  by|Oct 24, 2020
                  1 Answer
                  Answer This Question

                  A:  Thank you for your question. The XRJ06Z 18-Volt X2 (36V) LXT Lithium-Ion Brushless Cordless Reciprocating Saw requires both batteries to operate.

                  by|Oct 26, 2020
                    caret
                    Q:I see different weight for this saw. How heavy is this saw?
                    by|Sep 8, 2020
                    2 Answers
                    Answer This Question

                    A:  Thank you for your question. The XSL04ZU 18V X2 (36V) LXT® Lithium‑Ion Brushless Cordless 10" Dual‑Bevel Sliding Compound Miter Saw, AWS™ and Laser, Tool Only weigh 60.2 lbs. with battery.

                    by|Sep 9, 2020

                      A:  It’s about 60-65lbs without any attachments by itself.

                      by|Jun 9, 2021
                        page 2 page 4

                        Frequently Bought Together

                        +
                        +
                        Price:
                        $199.00