Questions and Answers for Maytag 1.7 cu. ft. Over the Range Microwave with Stainless Steel Cavity in Fingerprint Resistant Stainless Steel

A:  Hello Sieg, this model Microwave has a net weight of 52 lbs. We hope this information helps.

A:  Hello Chelle, you can remove the Limited Warranty sticker on the microwave. We recommend using warm water and gently peeling from the corner. if any residue is left we recommend warm water, mild dish soap, and a nonabrasive rag or sponge.

A:  Hello Maureen, if the Microwave is the same model then it would have the same dimensions. We hope this informaiton hepls.

A:  Hello Jack, the dimensions for MMV1164WB are Depth 16", Height 17 1/4", and Width 30". The dimensions for MMV1175JB are Depth 15 9/16", Height 17 1/8", and Width 29 15/16". We do recommend using the new template and mounting brackets.

A:  Hello, pbhrmh. It is not recommended to remove the Match badge as it could result in scratching or other cosmetic damage to the door.

A:  Hi, Diana. The charcoal filter is behind the vent grille at the top front of the microwave oven. The charcoal filter cannot be cleaned and should be replaced about every 6 months. Remove 2 screws on the vent grille, slide the vent grille to the left, tilt it forward, lift it out, and remove the filter. To reinstall, place the filter into its 2-hook area with the wire mesh side to the front. Replace the vent grille by inserting the 3 bottom latch hooks of the vent grille into the front holes, tilting the vent grille backward, sliding it to the right, and secure with screws.

A:  Manufactured in CHINA.

A:  Hello TomB! The dimensions are Depth 15 9/16", Height 17 1/8", and Width 29 15/16". We hope this helps.

A:  Hello Margaret! We can only recommend the appliance be installed per the Installation Instructions for proper use of the appliance.

A:  Hello Wendy, you can open the Microwave door to pause the cooking cycle in this model Microwave. We hope this information helps.