Q:For the ryobi link system, are there hooks we can use for guitars/guitar necks?
by|Apr 16, 2024
1 Answer
Answer This Question
A: Hello, Jaybravo - Our hooks aren't tested with any musical instruments.
If you need further support, then feel free to ask another question. You can also contact us by phone or text at 1.800.525.2579, Monday - Friday from 9 am to 5 pm (EST), or via email when you visit us at https://www.ryobitools.com/support/contact.
by|Apr 17, 2024
Q:Is this mounted to the wall studs?
by|Apr 13, 2024
1 Answer
Answer This Question
A: Hello, Brent - Yes, these wall rails are installable on sound structural supports (such as studs) in areas where no electrical wires, utility cables, pipes, or other obstructions are located.
If you need further support, then feel free to ask another question. You can also contact us by phone or text at 1.800.525.2579, Monday - Friday from 9 am to 5 pm (EST), or via email when you visit us at https://www.ryobitools.com/support/contact.
by|Apr 15, 2024
Q:What is the loaf capacity? You say 75lbs per linear foot. Which is misleading. Unless it actually holds 206 lbs if only a single stud is used. The manual does not state capacity for two (24" O.C) and 16" O.C., so what is the capacity for each setup?
by|Mar 1, 2024
1 Answer
Answer This Question
A: Hello, Elgranjefehuevogrande - The maximum weight capacity is 206 lbs. (75 lbs. per linear foot) and the wall rails must be secured to the wall according to the instructions in this operator’s manual to achieve maximum weight capacity. Please utilize the link below for the Operator's Manual. We hope this helps!
Operator's Manual
https://images.thdstatic.com/catalog/pdfImages/53/5392b619-ed6d-457e-a24e-bac6f1a66274.pdf
If you need further support, then call or text us at 1.800.525.2579, Monday - Friday from 9 am to 5 pm (EST), or through email when you visit us at https://www.ryobitools.com/support/contact.
by|Mar 4, 2024
Q:I would like to install a few Ryobi Link toolboxes under my workbench. Will the top of those boxes attach to these if I mounted them to the underside of the workbench?
by|Feb 21, 2024
1 Answer
Answer This Question
A: Hello, Jeff - We recommend using these wall rails on a structural support on a smooth and flat surface capable of bearing the weight of wall rails and the items stored on it. Additionally, the bottom of the tool boxes attach to the wall rails. We hope this helps!
If you need further support, then call or text us at 1.800.525.2579, Monday - Friday from 9 am to 5 pm (EST), or through email when you visit us at https://www.ryobitools.com/support/contact.
by|Apr 23, 2024
Q:What is the loaf capacity? You say 75lbs per linear foot. Which is misleading. Unless it actually holds 206 lbs if only a single stud is used. Therfore how does capacity calculated?
by|Feb 18, 2024
1 Answer
Answer This Question
A: Hello, Elgranjefehuevogrande - The maximum weight capacity is 206 lbs. (75 lbs. per linear foot) and the wall rails must be secured to the wall according to the instructions in this operator’s manual to achieve maximum weight capacity. Please utilize the link below for the Operator's Manual. We hope this helps!
Operator's Manual
https://images.thdstatic.com/catalog/pdfImages/53/5392b619-ed6d-457e-a24e-bac6f1a66274.pdf
If you need further support, then call or text us at 1.800.525.2579, Monday - Friday from 9 am to 5 pm (EST), or through email when you visit us at https://www.ryobitools.com/support/contact.
by|Feb 21, 2024
Q:Why and what is on or in these things that are known to cause cancer?
by|Feb 17, 2024
1 Answer
Answer This Question
A: Hello, Elgranjefehuevogrande - For California residents see Prop 65 WARNINGS within the link under "Product details" on the product page. We hope this helps!
If you need further support, then call or text us at 1.800.525.2579, Monday - Friday from 9 am to 5 pm (EST), or through email when you visit us at https://www.ryobitools.com/support/contact.
by|Feb 19, 2024
Q:What are the dimensions of the honeycpmb?
by|Jan 8, 2024
1 Answer
Answer This Question
A: Hello, Rick - The honeycomb is approx. 4.2” x 3.5” x 3.75” x .25”. We hope this helps!
If you need further support, then call or text us at 1.800.525.2579, Monday - Friday from 9 am to 5 pm (EST), or through email when you visit us at https://www.ryobitools.com/support/contact.
by|Jan 10, 2024
Q:There is a little hole in the middle of this mount that matches the little hole on the rail system. If I wanted to screw this attachment into the rail system to keep it from popping off accidentally, what screws should I use?
by|Jan 4, 2024
1 Answer
Answer This Question
A: Hello, Matt - Thank you for your question. The screws needed are #10 x 2 in. size. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the LINK XL Multipurpose Hook. - Joyce