Q:OK so panel is 48 x 7.5 and it is a pack of 5 so final assembly is 48 wide by about 36 high? The dimensions shown say 48 x 3/4 x 3/4 which doesn't make sense.
by|Jan 31, 2024
1 Answer
Answer This Question
A: Thank you for your interest in our products and reaching out! The size of the 48 in. H x 7.6 in. W FastTrack Garage Slat Wall 5-Panel are 48" x 7.8" x 0.7".
by|Mar 14, 2024
1 found this answer helpful
Q:Do you need to use a J trim to install? Hard to find……or just drill thru panel to install?
by|Jan 5, 2024
1 Answer
Answer This Question
A: Thank you for your interest in our products and reaching out! To assembly the 48 in. H x 7.6 in. W FastTrack Garage Slat Wall 5-Panel we recommend screwing 3 screws through the wall panel on 4 studs.
by|Jan 8, 2024
Q:Does this come with installation hardware?
by|Nov 13, 2023
1 Answer
Answer This Question
A: Thank you for your interest in our products and reaching out! The hardware for the 48 in. H x 7.6 in. W FastTrack Garage Slat Wall 5-Panel is not included. To insure the load bearing capability of the wall panel, you must install the wall panel with three 1/8 x 1.5" Screws on 4 wall studs.
by|Nov 20, 2023
Q:What happened to the 3-panel wall slats? I can't find them anywhere, I need one more to finish my garage and the 5-panel doesn't match my configuration!
by|Nov 12, 2023
1 Answer
Answer This Question
A: Thank you for your interest in our products and reaching out! The Rubbermaid 48 in. H x 7.6 in. W FastTrack Garage Slat Wall 5-Panel (model 2099469) is still available through Home Depot as well as Menards. Please use the link to view the item on Menards website.https://www.menards.com/main/storage-organization/garage-outdoor-storage/wall-storage/rubbermaid-reg-fasttrack-reg-wall-trade-48-wall-mount-slatwall-panel/2099469/p-1642874281100534-c-12657.htm
by|Nov 30, 2023
1 found this answer helpful
Q:What type of screws and what length should be used for install?
by|Jan 29, 2023
1 Answer
Answer This Question
A: Thank you for your interest in our products and reaching out! The Rubbermaid 48 in. H x 7.6 in. W FastTrack Garage Slat Wall 5-Panel uses the #10 x 2 in. Philips washer head screws for covered & uncovered wall.
by|Feb 3, 2023
Q:Why are these so hard to get? Is it a supply issue or are they being discontinued? I have several large products i would like to use them for but am concerned they are being discontinued.
by|Jan 20, 2023
3 Answers
Answer This Question
A: Thank you for your interest in our products and reaching out! The 48 in. H x 7.6 in. W FastTrack Garage Slat Wall 5-Panel are still an active product.
by|Apr 8, 2023
1 found this answer helpful
A: It seems very few stores actually carry the Garage units and parts. Most don't even display them any longer.
by|Aug 6, 2023
2 found this answer helpful
A: I have this same concern. I only bought my first 4 yesterday and need more and they are almost-impossible to find. What's the deal, HmDp?
by|Oct 26, 2023
Q:Do I have to drill the holes in the wall panel to install?
by|Aug 7, 2022
1 Answer
Answer This Question
A: Thanks for your interest in our products and reaching out! The Rubbermaid 48 in. H x 7.6 in. W FastTrack Garage Slat Wall 5-Panel will need to be drilled into to be installed.
by|Aug 9, 2022
Q:Can these be painted?
by|May 5, 2022
1 Answer
Answer This Question
A: Thanks for your interest in our products and reaching out! We have not tested paints on the Rubbermaid 48 in. H x 7.6 in. W FastTrack Garage Slat Wall 5-Panel and are unsure about what product will adhere properly to the surface.