Questions and Answers for Rust-Oleum Stops Rust 12 oz. Custom Spray 5-in-1 Gloss Sunrise Red Spray Paint (Case of 6)

A:  Happy to help! Rust-Oleum Stops Rust Custom 5-in-1 Clear Spray can be applied to exterior previously painted surfaces for extra protection and durability. Make sure the paint is dry and in good, sound condition. Your sheen of choice can be used, as either sheen will offer the same protection against fading. - Rust-Oleum Product Support 3

A:  Happy to clear things up. While Rust-Oleum Stops Rust Custom 5-in-1 Spray Paint can be applied to a variety of surfaces, it can not be applied to silk flowers. -Rust-Oleum Product Support 14

A:  Thank you for reaching out. While Rust-Oleum Stops Rust Custom 5-in-1 Spray Paint can be applied to outdoor metal surfaces, we do not recommend applying to a jet ski trailer. The exposure to full water immersion will cause the finish to blister and peel. -Rust-Oleum Product Support 14

A:  Happy to help, Joe! With proper surface prep and application, Rust-Oleum Stops Rust Custom 5-in-1 Spray Paint will last for years to come! - Rust-Oleum Product Support 3

A:  Thank you for reaching out. While Rust-Oleum Stops Rust Custom 5-in-1 Spray Paint provides a durable finish for indoor surfaces, it can not be applied to tile floors. The foot traffic will cause the paint to crack and peel over time. -Rust-Oleum Product Support 14

A:  Great question, Patty! Rust-Oleum Stops Rust Custom 5-in-1 Clear Spray is suitable for use over most previously applied coatings. If the previous coat was a brush-on paint, we recommend allowing it to fully dry and apply in a test area first to ensure the solvents do not react with the paint. - Rust-Oleum Product Support 3

A:  Happy to help. Yes, Rust-Oleum Stops Rust Custom 5-in-1 Spray Paint can be applied to all non-galvanized metal surfaces. -Rust-Oleum Product Support 14

A:  Thanks for reaching out, Jannie. Rust-Oleum Custom Spray 5-in-1 Stops Rust Spray Paint does an excellent job protecting non galvanized metal surfaces from rust, including rust caused by salt. To prep the surface, remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile. For best results, prime using Rust-Oleum Stops Rust Clean Metal Spray Primer, then topcoat with Custom Spray Gloss White. https://www.homedepot.com/p/Rust-Oleum-Stops-Rust-12-oz-Flat-White-Clean-Metal-Primer-Spray-7780830/100143442 - Rust-Oleum Product Support 6

A:  We appreciate your interest, Walter. Since Rust-Oleum Stops Rust Enamel Custom 5-in-1 Spray Paint cures to a hard finish, we do not recommend it for use on fabric. As the surface bends and flexes, it will cause the paint to crack and peel. - Rust-Oleum Product Support 3

A:  We're happy to help, Graham. Rust-Oleum Stops Rust Custom 5-in-1 Spray Paint can withstand temperatures up to 200° F. Exposure to temperatures above this will cause the paint to blister and peel. -Rust-Oleum Product Support 14