Questions and Answers for Ruvati 16-Gauge Stainless Steel 33 in. Single Bowl Farmhouse Apron Workstation Kitchen Sink

A:  We do not have a specific brand of disposal that we refer out. In order to attach a garbage disposal to the sink, you will need a garbage disposal flange. You can use the garbage disposal flange that comes with the garbage disposal you purchase or you can purchase one separately that fits into a 3.5” drain opening and is compatible with your disposal.

A:  The RVH9020 sink is 24" x 22" (front-to-back). Please see the sink spec sheet for additional information. https://www.ruvati.com/wp-content/uploads/RVH9020.pdf

A:  The sink is 21" from the back to where the exterior corner of the sink. Depending on how you position the sink, you should have 3"-4" behind it. We recommend discussing the installation with your installer to ensure the faucet you choose can be installed without issue. https://www.ruvati.com/wp-content/uploads/RVH9200.pdf

A:  The minimum base cabinet is 33". You can also use the RVH9200 which is 33" and requires a minimum base cabinet of 36". Please review our installation guide for detailed installation instructions. https://www.ruvati.com/wp-content/uploads/D_Apron_Front.pdf

A:  Our sinks are fully tested and cUPC certified by IAPMO. All Ruvati products comply with the federal “lead-free” requirement of the 2014 Reduction of Lead in Drinking Water Act, as well as state legislations in California (AB-1953) and Vermont (S-152).

A:  Our apron front sinks are customizable and they do not come with a cutout template. You will need to measure the sink itself and use the measurements you come up with to make your cut.

A:  Detailed information is available on the product page. https://www.ruvati.com/products/rvh9100-30-inch-apron-front-workstation-farmhouse-kitchen-sink-16-gauge/

A:  You will need an 'apron-skirt' cabinet design. We recommend consulting a contractor to determine if your existing cabinet can be modified to accommodate an apron front sink.