Questions and Answers for SINKOLOGY Bradstreet II 30 in. Farmhouse Apron Front Undermount Single Bowl Gloss Royal Blue Fireclay Kitchen Sink

A:  Hi Joelle, based off of the dimensions provided for this cabinet base, this should work with our Bradstreet II 33" sink.

A:  Hi Tracy, this sink is not a retrofit style. If you were interested in a retrofit sink, our 'quick-fit' sinks will all be under that category.

A:  Hi there, this sink can not be installed as a top mount. It is recommended to be an undermount but can also be installed as a flush mount.

A:  Hi there! This sink does not taper at all, so it will be 33" all the way down.

A:  No it doesn’t taper. It’s 33” across on top and bottom. 

A:  Hi Karen, we would not recommend using a pumice stone on this sink as it can damage the finish. we would recommend using mild soap and warm water for daily cleaning and our Fireclay care kit for any tough spots.

A:  I couldn't tell you because all three of the ones I ordered showed up broken.

A:  Hi Melissa, this sink does not have any faucet holes drilled into the sink, so it is completely up to your countertop material and personal preference which faucet is paired with the sink.

A:  Hi Wesley, absolutely! The SKU is for the sink itself so you should have no issues purchasing the accessories separate.

A:  Hi Julie, a replacement cutting board can be purchased through any of our online retailers websites under the model number SC102-17LB-481!

A:  24" deep will allow as much or as little overhang as wanted.

A:  Hi jenn, this sink has a recommended cut-out depth of 16". That being said, it is completely up to personal preference how much of an overhang you wanted so this can be altered depending on your preference.

A:  Hi Julie, the drain hole on this sink is 3.5" and we have attached these specifications for your review below. https://www.sinkology.com/wp-content/uploads/2022/06/042022-BII-Workstation-Spec-Sheet.pdf