Questions and Answers for Triton Products 18 in. H x 22 in. W White Poly Wall Kit Pegboard Set with Hooks DuraBoard Mounting Kit and Bin Systems (84-Piece)
Q:Does this have anything similar to a product by everbilt Model # 01158 Internet #202249585 Store SKU #174705 that holds screwdirvers?
by|Apr 1, 2017
2 Answers
Answer This Question
A: It has a very good selection of hooks. I am not sure what your asking about a certain type of hook. If you have big selection of screwdrivers you may need to get additional hooks.
by|May 4, 2023
A: Triton does carry a MagClip Multi-Function Magnetic Tool Holder Model # KTI-72465 Internet #202026747.
The MagClip Tool Holder is Magnetic.
by|May 4, 2023
Q:How many pounds of dead weight will each hook hole? How many pounds of live weight if they aren't moving around much?
by|Jan 26, 2017
2 Answers
Answer This Question
A: 5 lbs
by|Jan 14, 2020
A: Dead weight would be 10 lbs.
by|May 4, 2023
2 found this answer helpful
Q:Which hooks will fit in this board? You sell 3/16" and 1/4" hooks, will both fit?
by|Jan 13, 2017
1 Answer
Answer This Question
A: The 990-S Wall Kit includes 24 hooks. If you wish to purchase additional hooks any of our DuraHooks work with this. Below please find a list of some of the hooks. Thank you Triton Products
203477752
203477753
203477754
203477755
203477756
203477757
203477758
203477759
203477760
203477761
203477762
203477764
203477765
203477766
203477767
204774928
203477768
203477769
203477770
203477771
203477772
203477773
202021868
202994022
203477774
203477775
203477776
203477777
203477778
203477779
202021869
204323746
202647652
204288718
202021864
203477780
by|Oct 30, 2018
Q:Can these boards be mounted vertically as well?
by|Jan 9, 2017
2 Answers
Answer This Question
A: Most definetly. Great installation flexibility
by|May 5, 2023
A: Yes, The boards can be mounted horizontal and vertical.
by|May 4, 2023
3 found this answer helpful
Q:Can the board be cut to fit a small space such as inside a pantry? If so, can a regular circular saw cut it?
by|Jan 8, 2017
2 Answers
Answer This Question
A: yes it can.
by|Jan 14, 2020
A: Yes, the boards can be cut. We recommend using a Multi-Purpose Saw Blade made for cutting polypropylene.
Thank you,
Triton Products
by|Apr 9, 2023
2 found this answer helpful
Q:Does this fit inside a tool closet door?
by|Jan 2, 2017
3 Answers
Answer This Question
A: yes it can
by|Jan 14, 2020
A: yes it can.
by|Jan 14, 2020
A: The pegboard size per board is 22 in. x 18 in. x 1/8 in. polypropylene pegboard with 2 boards included. Please let know if need any other information.
Thank you,
by|May 4, 2023
1 found this answer helpful
Q:What is the diameter of each hole? 1/4"? 3/16"? 9/32"? Does a standard generic pegboard hook fit securely in the hole in this board?
by|Jan 24, 2016
2 Answers
Answer This Question
A: Hole diameter is 3/16 In. and a standard pegboard hook will fit in the hole of this pegboard.
by|May 3, 2023
3 found this answer helpful
A: 3/16th
by|Jan 14, 2020
Q:How much weight can 1 board support if the board is screwed directly into a wall stud?
by|Jan 24, 2016
1 Answer
Answer This Question
A: A single tool of 75 lbs, no way. Personally, I wouldn't attempt even a single tool over 5 to 7 lbs, but that's just my gut. Distributed across many of the holes (not just a few) of both boards, and using the tool hanging and mounting hardware kits provided, 75 lbs in aggregate might be possible. The tool hanging hardware is hefty, anchoring across at least two holes, and features screws that really hold the hardware in place (although this does limit impromptu flexibility somewhat). The board itself is solid plastic and not the fiberboard type material of standard pegboard, so it's sturdier and the holes are less likely to rip out, especially where moisture is involved. But the board has more flex to it, so proper mounting is key. The mounting kit comes with metal cups to space the board about 1/2" off the wall, and mounted as prescribed, it makes for a sturdy installation. The install instructions have you fastening the boards in three places across each of the two boards along their long sides. It's not just a four corners mounting proposition, since the board is too flexy for that. So if you follow the mounting instructions, you'll be putting screws in places other than just 16" OC studs. We used drywall anchors. Hope this helps.
by|May 3, 2023
5 found this answer helpful
Q:Is this 1/8" inch polypropylene board stronger then, less strong, or the same strength as as a regular pegboard?
How about compared to a galvanized steel pegboard? Is this 1/8" inch polypropylene board stronger then, less strong, or the same strength as as a galvanized steel pegboard?
by|Jan 24, 2016
1 Answer
Answer This Question
A: Steel pegboard is stronger than polypropylene pegboard. My experience is this 1/8" polypropylene board is stronger than similarly sized standard pressed fiber pegboard.
by|May 3, 2023
2 found this answer helpful
Q:What is the difference between DuraHook Model # 990-S, and DuraHook Model # 990?
Can each 22"x18" board be hung either vertically or horizontally? Or will the slots/hooks only work if they board is hung in one specific direction/orientation?
Thanks, SN
by|Jan 24, 2016
1 Answer
Answer This Question
A: The 990 and the 990-S are the same product. The 990-S has our new packaging. The 990 is being replaced with the 990-S.