Questions and Answers for Varathane 1 qt. Smoke Gray Classic Interior Wood Stain

A:  Thank you for reaching out, Julie. If applying Rust-Oleum Varathane Classic Wood Stain to doors or exterior surfaces we recommend top coating using Rust-Oleum Varathane Water-Based Spar Urethane. If the finish has faded we recommend sanding the surface and reapplying a new coat of the stain. https://www.homedepot.com/p/Varathane-1-qt-Clear-Satin-Water-Based-Outdoor-Spar-Urethane-250241H/100165652 -Rust-Oleum Product Support 14

A:  Thank you for reaching out. Rust-Oleum Varathane Classic Wood Stain contains harmful gases that we do not recommend applying around or in direct contact with plants. We do not currently offer any products that we would recommend for this application. -Rust-Oleum Product Support 14

A:  Thank you for reaching out. While Rust-Oleum Varathane Classic Wood Stain is not available in a matte finish `Rust-Oleum Varathane Water-Based Matte Polyurethane can be applied as a protective and provide a clear matte finish. https://www.homedepot.com/p/Varathane-8-oz-Clear-Matte-Water-Based-Interior-Polyurethane-4-Pack-262075/305588546 -Rust-Oleum Product Support 14

A:  You can use a thin artist paint brush and only add this stain to the scratched areas. If the scratch is NOT absorbing the stain then multiple coats one on top of the other might be needed to cover. Then protect the area with a wax or poly coat.

A:  Thank you for reaching out. Before applying Rust-Oleum Varathane Classic Interior Wood Stain remove any existing finishes with sandpaper or stripper. For a consistent finish across your project we recommend applying Varathane Classic to the entire surface. -Rust-Oleum Product Support 14

A:  No. This is a stain only. It is meant to go onto unfinished wood to change the color. If you just want to make your floors more shiny, then lightly sand, clean, and apply a poly top coat. Make sure the poly you use is made for floors and not furniture.

A:  Thank you for reaching out. Rust-Oleum Varathane Classic Wood Stain provides a rich natural color for wooden floors. It provides minimal shine or sheen, for added sheen we recommend applying Rust-Oleum Varathane Water-Based Floor Finish. https://www.homedepot.com/p/Varathane-1-gal-Clear-Gloss-Water-Based-Floor-Polyurethane-2-Pack-230031/202057139 -Rust-Oleum Product Support 14

A:  We're happy to help. Since Rust-Oleum Varathane Classic Wood Stain and Rust-Oleum Watco Danish Oil are both penetrating products they cannot be used with each other. Instead, we recommend top coating the stain using Rust-Oleum Varathane Water-Based Polyurethane. https://www.homedepot.com/p/Varathane-1-Gal-Clear-Satin-Water-Based-Interior-Polyurethane-200231/100176203 -Rust-Oleum Product Support 14

A:  As long as the headboard is bare wood, Timothy, you can stain the surface using the Rust-Oleum Varathane Classic Stain. If you are unable to remove the coating/stain, you run the risk of having the new stain not penetrate in appropriately, which can cause issues with drying. We hope this helps! - Rust-Oleum Product Support 1

A:  Thank you for reaching out, Patrea. If staining previously finished surfaces we recommend using our Rust-Oleum Varathane Gel Stain as it can be applied to previously finished surfaces. https://www.homedepot.com/p/Varathane-1-Qt-Black-Wood-Interior-Gel-Stain-2-Pack-349700/308461690 -Rust-Oleum Product Support 14

A:  Let's see if we can clear things up, Pete. After applying Rust-Oleum Varathane Classic Wood Stain all excess wood stain should be wiped and removed from the surface. -Rust-Oleum Product Support 14

A:  Thank you for reaching out, Glenda! Rust-Oleum Varathane Classic Wood Stain is available in several different shades of browns, including Espresso and Aged Walnut. With any application, it is best to apply in a test area first to ensure a favorable color, as the type and cut of the wood will affect the color. - Rust-Oleum Product Support 3