Questions and Answers for Varathane 1 qt. White Wash Interior Wood Stain

A:  Happy to clear things up! Yes, the listed recommended coverage rate for Rust-Oleum Varathane White Wash Wood Stain is for a single coat. - Rust-Oleum Product Support 3

A:  Happy to help, Wesley! Varathane White Wash Interior Wood Stain can be used on bare hardwood floors. Like with all stains, be sure to test your stain to verify the desired color. To test, apply the stain in an inconspicuous area. After staining, Varathane Water Based Floor Finish Polyurethane should be applied, a minimum of 4 coats are required. https://www.homedepot.com/p/Varathane-1-gal-Clear-Satin-Water-Based-Floor-Polyurethane-2-Pack-230231/202057141 - Rust-Oleum Product Support 6

A:  We had a tongue and groove pine bathroom. After 20 years we wanted to bring more light to the room. The added new ceiling, floor, vanities, lights. We use the white wash as white stain was not available. Hope this help.

A:  Happy to help, Chris. While not the exact same product, both Varathane Whitewash Wood Stain and Varathane Whitewash Wood Enhancer both contain an innovative oil based formula that adds beauty and brightens wood with a shade of white color while allowing the natural grain to show through. - Rust-Oleum Product Support 6

A:  Happy to help, Fred. A clean rag and some mineral spirits can be used to help loosen Rust-Oleum Varathane Whitewash Wood Stain. - Rust-Oleum Product Support 3

A:  Thanks for asking, Paula. The Rust-Oleum Varathane White Wash Wood Stain is not a food-grade coating and not intended for use on countertops. The Rust-Oleum Watco Butcher Block Oil would be the product we offer for that type of application. https://www.homedepot.com/p/Watco-1-pt-Carbon-Gray-Butcher-Block-Oil-370150/316419487 - Rust-Oleum Product Support 5

A:  I did this and it worked perfectly. Just make sure the stain is fully dry before applying poly. 

A:  Happy to help, Robin! Yes, Rust-Oleum Varathane White Wash Wood Stain can be topcoated with either our oil or water-based interior polyurethanes. Make sure the stain has dried as directed prior to applying the polyurethane. - Rust-Oleum Product Support 3

A:  Thank you for bringing this to our attention, Don! Rust-Oleum Varathane White Wash Wood Stain can be topcoated after 1 hour in ideal conditions. Make sure to apply as directed and ensure the surface feels dry prior to applying the polyurethane. We will work to get this corrected on our end! - Rust-Oleum Product Support 3

A:  Happy to help Robin. Varathane White Wash Wood Stain is only available as an oil based stain. - Rust-Oleum Product Support 6

A:  Thank you for reaching out! Rust-Oleum Varathane Whitewash Wood Enhancer is intended for use over bare or stained wood surfaces, as it does need to be able to penetrate the wood to properly adhere. Please keep in mind, this is not a food-grade stain, and it is not recommended for use on surfaces that will have direct contact with food. - Rust-Oleum Product Support 3

A:  You will need to sand the bolck back down to bare wood to produce the result you want. Mike

A:  Happy to help, Nate! Rust-Oleum Varathane Whitewash Wood Stain dries after 1 hour. Please keep in mind, this is a penetrating product, and may prevent additional stain from being able to penetrate the wood. We recommend applying in a test area first to ensure the desired finish. - Rust-Oleum Product Support 3