A: Hello, thank you for reaching out. You can cut down the rails to the lengths needed and the assembly for this unit will remain the same. Best regards, Russell
by|Feb 26, 2024
A: Yes you can cut the rails to suit your requirements.
by|Jul 3, 2023
Q:Can I paint the fence?
by|Jun 28, 2023
1 Answer
Answer This Question
A: Hello, thank you for reaching out! So, this is a tricky question. You can technically paint the vinyl but, the moment you paint it, you’re creating problems for yourself. It voids the warranty. It requires a lot of paint to actually change the color. And worst of all, you’ll need to re-paint it more often than you would like to. Because of all this, we don’t recommend it. However, if you really, really have a burning desire for an alternate shade, you’ll want to paint it with special epoxy-based paint like Fusion by Krylon. Best regards,
Russell
by|Jun 28, 2023
Q:If I purchase vinyl fence can you install them?
by|Jun 23, 2023
1 Answer
Answer This Question
A: Hello, thank you for reaching out. We do not install the fence, but they are designed that the average home owner is able to install it. With that said, you can hire a handyman or contractor from your area and they should be able to install it. They do come with instructions to install and we recommend using the instructions even if an experienced contractor is installing. Best regards,
Russell
by|Jun 25, 2023
Q:We are concerned about being able to pound the pipes into the ground. When we dig in our yard to plant things, we often run into rocks. Wouldn't this be a problem when trying to sink the pipes into the ground?
by|Jun 22, 2023
1 Answer
Answer This Question
A: Hello, thank you for reaching out. Rocky ground is always an issue when installing fence. If the rocks are small enough that the pipe will be able to push past them, then everything should be fine. If the rocks are too large then unfortunately there isn't much to do other than dig the rock out. if you would like to discuss this in further detail then please reach out to us at 877-778-5733. Best regards, Russell
by|Jun 23, 2023
Q:What is the width between spickets
by|Jun 1, 2023
1 Answer
Answer This Question
A: Hello, thank you for your interest in the Nantucket Picket Fence! The spacing between the pickets is 3.46". Best regards, Russell
by|Jun 2, 2023
Q:The end- posts are "hollow" PVC (so the stake and leveling mechanism can be housed inside. Are the pickets and cross-pieces also home PVC? Or are they solid, cellular PVC?
by|May 20, 2023
1 Answer
Answer This Question
A: Hello!
Thanks for reaching out. Great question! The pickets and rails are both hollow as well.
Please let us know if you have any other questions! Thanks again for reaching out.
Best,
Andrew
by|May 22, 2023
Q:hi is there a gate that can be used with this product?
by|May 10, 2023
1 Answer
Answer This Question
A: Yes! The gate that goes with the Nantucket Vinyl fence is the Nantucket Vinyl Gate. The item code for the gate is BL19102. You will also need to purchase 1 finishing post for your gate and 1 finishing post to complete the end of your project. The item code for the finishing post is BL19042.
by|May 14, 2023
1 found this answer helpful
Q:How many panels doe it come with?
by|May 4, 2023
1 Answer
Answer This Question
A: Hello!
Thanks for reaching out. This product is sold in a kit with 1 panel, 1 post, 1 pipe anchor kit and 1 cap, plus necessary brackets and hardware.
Thanks again for reaching out!
Best,
Andrew
by|Sep 10, 2023
2 found this answer helpful
Q:Can a seven pound cat fit between the pickets?
by|May 3, 2023
2 Answers
Answer This Question
A: Yuge cat. Yes. I think.
by|May 5, 2023
A: Hello,
Thanks for reaching out!
We actually can't say if your cat will fit through the pickets or not. Every animal is different. Feel free to send us pictures of your cat to hmmm@wambamfence.com though. We love pet pics!
The dimension between the pickets is 3.46" if you would like to take a ruler and see if the fence measures up to your cat's standards!
Best Regards,
Kayla Wallace
by|Jun 3, 2023
4 found this answer helpful
Q:Is it possible to trim a 6 foot section to span just 5 feet? If so, can you recommend a method
by|May 2, 2023
1 Answer
Answer This Question
A: Hello,
Thanks for reaching out!
Yes, our Sturbridge fence is customizable in width and height. Simply use a saw with a fine tooth blade to cut the top and bottom rail to your desired width and attach them as instructed in the installation guide. The fine tooth blade is imperative as a large tooth blade will chip your vinyl.
Please contact us with any further questions at 877-778-5733.
Best Regards,
Kayla Wallace