Customer Reviews for Everbilt 3/16 in. x 4 in. Zinc-Plated Steel Mushroom-Head Phillips Drive Anchor Toggle Bolt (15-Pieces)

Great for mounting TVs and floating shelf. It holds very well amd i recommand it to all those that Install TVs on the wall

Was not sure of the thickness need so bought the 1/4 and 3/16 for tv wall mount. Worked great

Mounting heavy objects, like TVs, on the wall is really secure when using these toggle bolts.

I installed Grab Bars in a shower using these Toggle Bolts. They held great.

Great product! Very easy to use.

Use these for larger mounting jobs. These use ¼” inch bolts and the toggle bots are pretty big, demanding a hole about ⅝” be drilled through the drywall. The bolts are three inches long. It is nice to see Phillips head drive on the ends as the older style using a flat slot were a pain to thread in with a power tool. Shear load is 120 lb on half inch drywall and 85 lb on hollow block. Made in China

EVERBILT 1/4 in. x 3 in. Zinc-Plated Toggle Bolt with Round-Head Phillips Drive Screw (10-Piece) is a standard fastener for hollow walls. Toggle bolts have been around for a while and do a good job. They work in drywall and old construction lathe walls. I have lathe walls in my house and find them more secure than other types of fasteners. I've used a set of these size toggle bolts to hold up a large shelf filled with books for decades, still holding solidly. These Everbilt toggle bolts are standard and are no different from others. I've used. I've bought and used Everbilt toggle bolts at Home Depot before in their variety pack. For those who haven't used them before, they are single use fasteners. Once they go in the wall they can't be removed without making the hole much larger so just push them in the wall, clip the screw and use another fastener, if needed. You don't need to over stress them to set in the wall. They have excellent holding power.

I have used these 1/4 in. x 3 in. Zinc-Plated Toggle Bolts with Round-Head Phillips Drive Screws in a (10-Piece) package for many years and they are about as handy of a bolt as you can get to secure towel racks and toilet paper holders and cabinets and many other things tightly to your walls . The package states they can secure as much as 120 pounds with 1/2 inch drywall shear and hollow block shear to 85 pounds . They are very fast and easy to install and will last for a long time .

i honestly can't say anything good about this product. It's literally made from the softest metal i have ever seen. the screw heads strip out the moment any pressure is applied to them. bolts don't hold well, and pulled back out through the drywall. just not pleased at all.

These go in easy and can work in shallow walls. Our walls are 1/2" wallboard 3/8" tile and 1 1/2" deep before we hit concrete. These work and hold well and are the best option for the job I had to do with the anchors. I used these to put in medicine cabinets and they hold well.

This is awesome bolt. I used it to mount a 52inch and 60inch flat screen tv. I am very happy with bolt.

An old fashioned type of anchor, but it's still better than a lot of the others. Maybe the only drawback is that you first have to drill a big enough hole through the drywall, so that the toggle bolt will fit thru. Especially good for the old plaster and lathe walls. Other types of expandable anchors can crack old plaster. But these don't expand within the plaster, they expand behind the plaster, then you snug them up.

heads strip very easy not good

Excellent product & price

These bolts are fine, nothing too special as they do their job. HOWEVER... The recommended hole diameter is listed as 1/2 inch. The will not fit in that size home. Must be at least 5/8 inch just to get the wing through the drilled hole. If not for a large, protruding hinge, it may fit the 1/2 hole, but that isn't the case. Just be prepared to have a larger drill bit on hand.

Good value. Worked as expected

Good product. It was what I was looking for.

The spring are not strong. It may fail.

Toggle bolts were easy to install. Instructions could use a picture of proper positioning for insertion into drywall.

These Molly bolts are a game changer!