Prep floor accordingly to directions and coated twice. Waited 48 hrs before use and the floor peeled in places where table legs, chairs and anything that rested on it. Stick to epoxy, not worth the price for Behr product!
Was this helpful?
Response from BehrAugust 24, 2020
Thank you for writing in. I'm sorry to hear about the peeling issue experienced with Porch & Patio Anti-Slip Floor Paint. It certainly isn't what we want our customers to go through.
To fix the peeling issue, I recommend sanding down the peeled areas to a smooth finish before cleaning and touching up. This coating requires a 72-hour dry time before going back to normal use and moving furniture back on the surface.
I understand this situation must be disappointing and encourage you to contact Behr's Customer Care Department for further assistance. We'd love to help.
The paint line is ok as long as it doesn’t get water near it. I prepped the concrete as the instructions stated, etched the patio as well and dead center of the front door, the paint blistered. Took 4 gallons to paint wished I wouldn’t have wasted time and money.
Was this helpful?
Response from BehrJune 2, 2020
Thank you for your review. I'm sorry to hear about the blistering on your patio! To fix, I recommend sanding down the area that blistered, spot etching and priming the bare concrete, then touching up with more paint. For further assistance with your project, please feel free to reach out to us directly. We look forward to hearing from you! - Sara
I applied this over a concrete patio that had been previously painted. No primer was used. I cleaned the patio thoroughly and it was dry upon paint application. I applied two coats with a roller. Instructions on can says wait 72 hrs prior to normal use. Well its now day 6 and the paint still peels upon normal use. Put a chair on the patio and the paint peels away revealing the prior paint job. Walk on the patio with too hard a stride and the paint peels. Can also says can take 30 days for it to fully cure, so I am hoping I didn't receive 4 bunk cans. Anyhow, its not practical to wait 30 days to use a walking surface after painting. You can do better Behr!
I purchased this product to paint some stairs that I didn't want to be slippery like they might be with regular paint. It has the texture material built in to provide a not-slip surface. It was easy to apply once I made sure I had stirred it up thoroughly, and did result in a safe surface. The non-slip material didn't go on quite as evenly as I had hoped, leaving some stairs with more than others, but overall I am satisfied that it will do the intended job.
Looked great when finished, but after two weeks it started...
November 11, 2020
Looked great when finished, but after two weeks it started peeling up with just foot traffic.
Was this helpful?
Response from BehrNovember 11, 2020
Hello Jk, thanks for sharing your feedback. We're sorry to hear your paint is peeling so soon; that's not the experience we want our customers to have with our products. To get your project back on track, we'd recommend removing all the loose paint from your surface, cleaning it, allowing it to dry, and touching up the affected areas. Keep in mind that although the paint dries to the touch within hours, it can take up to 4 weeks to fully cure and bond to your surface. Customer satisfaction is important to us. Please feel free to contact our Customer Care team directly with any questions you may have or for further assistance. Have a great rest of your day. –Joanna