#1 Home Improvement Retailer

Customer Reviews for BEHR PREMIUM 1 gal. #P270-5 Fuzzy Duckling Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

Internet #309222702

Model #93001

Store SKU #1004314352

  • Now even better with an improved adhesion formula
  • Resists peeling caused by hot tires
  • Available in custom colors and computerized color matching

Customer Reviews

  • 3.8
    out of 1,091 reviews
  • 53% recommend this product
Filter by:
Showing 1-30 of 1,091 reviews
Absolutely horrible paint!!
Easy to apply but worse floor paint I have ever used, prepared floor according to directions!! Tires pick it right up, what a mess, how do I recoat it with good paint? Used Rustoleum 2-part epoxy before on a couple garage floor and it is 100% better paint but wanted something cheaper this time and I am paying for it now!!!!
by
Response from BehrJan 2, 2024
Hi GAGG, thanks for your review. I'm sorry to hear your tires are picking up the paint. To fix these areas, I recommend sanding to remove any peeling paint and smooth out the edges, etching any bare concrete until it feels like 150-grit sandpaper, and cleaning the surface before touching up and applying a full coat of paint (if needed). Let the newly painted areas dry for 7 days before driving/parking, or drive/park over cardboard placed on the surface after 3 days of dry time. Customer satisfaction is important to us, and we'd like to help get your project back on track. Please feel free to reach out to us directly so we can further assist. We look forward to hearing from you! -Christina Behr
    1 found this review helpful
    Used this on my basement floor with decorative chips and a clear coat over it. Came out great.
    by
    • Verified Purchase
    1 found this review helpful
    Not what I expected from Behr
    Painted driveway, waited 7 days as instructions said, paint still came off from tires when cars were parked :(
    by
    Response from BehrOct 9, 2023
    Hi there, thank you for your review. I'm sorry to hear that the Concrete & Garage1-Part Epoxy peeled up where the tires were parked. I can understand your disappointment with the time and effort that goes into a project like this. Customer satisfaction is very important, and our Customer Care team is on standby and ready to help. Please contact us directly so we can further assist you with a resolution. In the meantime, the issue can be fixed by removing the loose coating by either power washing or sanding, then etching the bare concrete. After the floor is etched and cleaned, apply our Concrete & Masonry Bonding Primer and re-applying the 1-Part Epoxy Concrete & Garage Floor Paint. Again, our Customer Care team would like to hear from you to see how we can help. -Ronald Behr
      2 found this review helpful
      Great product and easy to use.
      by
      • Verified Purchase
      2 found this review helpful
      This paint does not dry and is wrinkling
      I bought 2 gallons of this product to paint my garage floor, I sanded the floor to remove the shine from the old paint, then I put degreaser and a power washer, I let it dry for 24 hours and proceeded to paint, applied the first coat and wait 24 hours to give the second coat, the result after 3 weeks the floor is still sticky and wrinkling in many places, I am very disappointed, I never thought that Behr had such a bad product.
      by
      Response from BehrJul 4, 2023
      Hi Dee5727, thanks for your review. I'm sorry to hear about the sticky and wrinkling finish on your garage floor. Please feel free to reach out to us directly so we can learn more about your project and assist. We look forward to hearing from you! -Christina Behr
        5 found this review helpful
        overall the paint is great. I painted the driveway with it and it came out great I'm going to clearcoat it just because I want the project to last a long time but I feel like I don't even need to as long as I let it cure and drive for seven days I bet that driveway would be probably fine for the next 10 years because the paint seems to bond really well to itself, which is great, because some paint once they dry and you try to put another coat on them, especially exterior paints with other epoxy. Sometimes you get separation levels and it bubbles up and pulls up with a hot tire but the stuff seems to be working out
        by
        • Verified Purchase
        1 found this review helpful
        A waste of time & money
        After spending 3 days cleaning, prepping and applying the epoxy it didn't even last 1 week... very disappointed after prepping 6,000 square feet.
        by
        Response from BehrJun 9, 2023
        Hi Bsyheels, thank you for your review. I’m sorry to hear that the coating did not last. This is not how we expect our products to perform, and I understand your disappointment. I recommend removing the loose coating, cleaning and etching the bare concrete until it feels like 150-grit sandpaper, and touching up or recoating as needed. Then, you'll want to allow the coating to dry for 7 days before subjecting to automotive tires. Customer satisfaction is important to us, and we appreciate your feedback. Please reach out to us directly if you need further assistance; our customer care team is happy to help you! -Giovanna Behr
          4 found this review helpful
          No issues here
          No problem at all. Love this product. My floor looks awesome...
          by
            Just stay away from this paint
            Even after reading all the negative reviews, I bought it anyway after the Behr paint rep in the store assured me they will take care of any problems. After prepping the floor, I applied the paint to one half of it at a time, letting it dry as instructed on the label, then applying a second coat and letting it dry for a week before walking on it. It seemed to cure OK here in SW Florida, however 2 months later the paint is coming up where the tires stand on it. Apparently, heat from the warm tires causes it to separate from the concrete and flake off.
            by
            Response from BehrMar 8, 2023
            Hello, thank you for your review. I'm very sorry to hear the Concrete & Garage 1-Part Epoxy you applied two months ago is peeling. That is not typical. To fix the issue, I recommend removing the loose coating and etching any bare concrete to ensure the proper texture for adhesion. Make sure the floor is clean and dry before priming the bare spots with our Concrete & Masonry Bonding Primer to enhance the adhesion. Then, touch up the areas and recoat the surface if needed for uniformity. Customer satisfaction is important to us, and we appreciate your honest feedback. Please reach out to us directly if you need further assistance; our Customer Care team is happy to help! -Lina Behr
              5 found this review helpful
              Does not stick
              Paint came up when it got wet.
              by
              Response from BehrFeb 27, 2023
              Hi Bill, thank you for the review. I’m sorry to hear that our 1-Part Epoxy Concrete & Garage Floor Paint started peeling after it got wet. This is not typical, and I can understand your disappointment. I recommend removing the loose coating by either power washing or sanding, then etching the bare concrete. After the floor is etched and clean apply our Concrete & Masonry Bonding Primer and then re-applying the 1-Part Epoxy Concrete & Garage Floor Paint. Customer satisfaction is important to us, and we appreciate your feedback. Please reach out to us directly if you need further assistance; our customer care team is happy to help you! -Ronald Behr
              • Verified Purchase
              5 found this review helpful
              Economical, durable, perfect for my workshop
              After 4 months of hard use I'm very impressed. It looks great, dirt grease and oil spills clean right up. No scratch, chip or peel. I did a lot of surface prep, sulfuric acid and many rinses to get the residue out of the concrete, then primed with the Behr primer. 3.5 gallons covered 1,100 square feet. Cost for prep, prime & 1 thick coat inc nonslip was around 40 cents/square foot. I was quoted $3.50 - $4.00 for a professionally applied all-solid 2-part epoxy. I doubt I'd be 10x happier.
              by
                • Recommended
                The paint covered really good unfortunately the paint we selected...
                The paint covered really good unfortunately the paint we selected was to bright.
                by
                • Verified Purchase
                Great Color and Epoxy not the same quality
                I’ve been using the Behr White Epoxy on my commercial floors and it is hard to maintain even with the high gloss sealer, scuff marks embed in the sealer and the white eventually fades to yellow. Now spots I’ve painted and spots I haven’t started bubbling. If it was a way to make this product not scuff and peel or fade it would be amazing for my gallery.
                by
                  • Recommended
                  Concrete paint or stain?
                  Looks thick, didn’t fill in the smallest of spider cracks, dries more like a stain than a paint, everything under it shows…
                  by
                  • Verified Purchase
                  1 found this review helpful
                  Pealed up after getting wet
                  Did all the proper steps for prep. Cleaned 3 times even acid etched before install has been sitting for over a month before driving one. Wife parked Yukon in garage it was raining out and water ran off sat on floor and basically turned the paint to mush completely disappointed I expected bear to be a top notch product I bought the 5 Gallon did two coats 24hrs apart would not recommend to anyone to buy there products.
                  by
                  Response from BehrOct 13, 2022
                  Hi Steve, thank you for the review. I’m sorry to hear that our 1-Part Epoxy Concrete & Garage Floor Paint is peeling so easily. This is not typical, and I can understand your disappointment. I recommend removing the loose coating by either power washing or sanding, then etching the bare concrete. After the floor is etched and clean apply our Concrete & Masonry Bonding Primer and then re-applying the 1-Part Epoxy Concrete & Garage Floor Paint. Customer satisfaction is important to us, and we appreciate your feedback. Please reach out to us directly if you need further assistance; our customer care team is happy to help you! -Ronald Behr
                    4 found this review helpful
                    Paint colors do not match
                    Color did not match the previous gallon I purchased in June 2022
                    by
                    • Verified Purchase
                    • Recommended
                    Looks beautiful
                    Coverage is good. Easy to use with the stencil i picked for my driveway.
                    by
                    • Verified Purchase
                    • Recommended
                    1 found this review helpful
                    Poor quality
                    Applied 3 cans and paint peeled from driveway
                    by
                    Response from BehrDec 27, 2021
                    Hi Maggie, thank you for your review. I’m sorry to hear about the peeling. This is not how we expect our products to perform, and I understand your disappointment. I recommend removing the loose coating, cleaning and etching the bare concrete, and touching up or recoating as needed. Customer satisfaction is important to us, and we appreciate your feedback. Please reach out to us directly if you need further assistance; our customer care team is happy to help you! -Giovanna Behr
                    • Verified Purchase
                    3 found this review helpful
                    Very Disappointed and frustrating
                    I bought 2gallons of paint and Followed all the instructions before applying. Applied 2 coats a gap of 1 day. After 1 week when I try to move my household items, the paint started peeling off. It looks very odd. I am still parking my car outside in fear of the entire color should not come out. This product is very very disappointed, and we would not consider recommending this product. It is waste of time and money.
                    by
                    Response from BehrDec 9, 2021
                    Hello Susant, thank you for your review. I’m so sorry the paint peeled off when you moved your household items. I recommend removing any loose paint, cleaning the surface, spot etching any bare concrete, spot priming the bare concrete areas with our Concrete & Masonry Bonding Primer No. 880 to help with further adhesion, then touching up and recoating with paint. Customer satisfaction is important to us, and we appreciate your feedback. Please feel free to reach out to our Customer Care team directly for further assistance with this. Our team is happy to help you! -Joni Behr
                      4 found this review helpful
                      Did not last 6 months.
                      I was not satisfied with this product. It did not stick to my concrete porch floor. It started chipping within a couple of months after I painted. It seemed to react to rain water when my porch got wet from the rain.
                      by
                      Response from BehrAug 2, 2021
                      Hello L44, thank you for your review. I’m so sorry the paint chipped off your porch floor. I recommend removing any loose coating, cleaning the surface, spot etching any bare concrete areas, spot priming the bare concrete spots with our Concrete & Masonry Bonding Primer No. 880 to further help with adhesion in those areas, then touching up and recoating with the paint. Customer satisfaction is important to us, and we appreciate your feedback. Please feel free to reach out to our Customer Care team directly for further assistance with this. Our team is happy to help you! -Joni Behr
                        3 found this review helpful
                        I am just laying down the first and second coat and yes you will need two coats, in my actual exp...
                        I am just laying down the first and second coat and yes you will need two coats, in my actual experience, to cover evenly gray color and acid etched concrete. I started with one can of "White" which covered 1/4, one coat, of the '3-car' size garage foot print. Then I found Home Depot online had pre-tinted at the factory, a full range of colors, shipped free for $2 less per can than the basic 4 colors keep in stock at the store. That is my idea of a great deal. I switched to Gold Torch to finish the job. It is going to take 5 to 6 gallons to finish the two coats. Thank you Home Depot and BEHR. With the hot weather I do 1 gallon at a time and do not have to reseal and store half used cans. I have had 2 part epoxies lift with hot tires in my past FL garage. I have lower expectations and will not be driving on this painted surface with car / light truck tires regularly. I hope it will hold up as a workshop floor and not lift with lawnmower, trailer and boat trailer tires and the like.
                        by
                          • Recommended
                          I like Behr products but this is an EXCEPTION!
                          I really like Behr products. In all my years of painting, I have had only two of their products be of sub par level. This is one of them. The plan was to apply this to our living room floor. We had it mixed to the "Colorful Leaf" which results in a nice burnt orange look. I followed the instructions to the letter. I even called the Behr help line and conversed with them about my project before starting. I applied three coats over a two day period and the results looked amazing. I then left the home with the thermostat set on about 70 F and the dehumidifier running. After two weeks, I returned to find the floor still felt tacky and was soft. I talked with a Behr representative who said that the problem was I applied three coats. I challenged him stating the literature says nothing about more than two coats. It does state "multiple coats may be required". He recommended I remove all the paint and start over. Great solution? In conclusion, he offered to reimburse me for the paint cost. I accepted. I plan on wet sanding all the Behr product off the floor and applying a real, two part epoxy, one that is intended for commercial applications. Thus, I recommend you save yourself a bunch of trouble and avoid this bad paint. If you want an epoxy floor, use a true two part epoxy coating. They are a pain but set hard as rock in a relatively short period. Color choices may be limited but a minor compromise is better than a complete and unmitigated failure.
                          by
                          Response from BehrJun 7, 2021
                          Hi KenS, thank you for your review. I'm sorry to hear that the coating did not dry to a hard finish even after two weeks. This is not typical, and I understand your disappointment. I'm glad you reached out to us directly for additional help. Customer satisfaction is important to us, and we appreciate your feedback. Please let us know if there's anything else we can do to help. Have a great day! -Giovanna Behr
                            5 found this review helpful
                            Garbage-Waist of 2 weeks
                            This is Garbage. Don’t buy this product no matter how much prep you do. It started coming off within the first week we put the shop back into service.
                            by
                            Response from BehrMay 13, 2021
                            Hello FCR, thank you for your review. I’m so sorry the paint started coming off so soon. I recommend removing any loose coating, spot etching any bare concrete to feel like 150 grit sandpaper, spot priming the bare concrete spots with our Concrete & Masonry Bonding Primer No. 880 to further help with adhesion in those areas, then touching up and recoating with the paint. Customer satisfaction is important to us, and we appreciate your feedback. Please feel free to reach out to our Customer Care team directly for further assistance with this. Our team is happy to help you! -Joni Behr
                              3 found this review helpful
                              very poor quality was peeling the next day, Behr has...
                              very poor quality was peeling the next day, Behr has very good paint but in concrete paint I fail them
                              by
                              Response from BehrApr 23, 2021
                              HI JASMIN,

                              Thank you for reviewing Behr 1-Part Epoxy. I'm very sorry to hear that it peeled within one day, as that's very abnormal and not what we want our customers to go through.

                              The loose paint edges can be sanded down with medium grit (80-120) sandpaper to a smooth finish. If 1-Part Epoxy is peeling down to a previous coating, you can clean and touch up with more paint. Etching with something like muriatic acid is recommended if the paint is peeling down to bare concrete. Although priming isn't required, applying Behr Bonding Primer No. 880 before 1-Part Epoxy will help increase adhesion.

                              Customer satisfaction is very important to us, and I encourage you to contact Behr directly for further assistance. We'd love to learn more about your experience and find the best way to help.

                              Kindest regards,

                              Doris Behr
                              • Verified Purchase
                              1 found this review helpful
                              Worked good. Able to put 3 coats on 4 car...
                              Worked good. Able to put 3 coats on 4 car garage. Plus the 10” concrete sides. With about quart left over for future touch up.
                              by
                              • Verified Purchase
                              Good Color, Weak Application
                              I was thrilled to find this. The perfect color for what I was looking for in my basement gym, straightforward, great reviews. I washed my concrete floor, applied the acid etch, did it up. Looked great. For a few days. Flakes are coming up off my basement floor. I’m not even dropping weights on it or even wearing shoes.
                              by
                              Response from BehrFeb 25, 2021
                              Hi Nick,

                              Thank you for reviewing Behr 1-Part Epoxy. I'm very sorry to hear about the adhesion issue experienced, as it certainly isn't what we want our customers to go through.

                              The loose paint edges can be sanded down with medium grit (80-120) sandpaper to a smooth finish. If 1-Part Epoxy is peeling down to a previous coating, you can clean and touch up with more paint. Etching with something like muriatic acid is recommended if the paint is peeling down to bare concrete. Although priming isn't required, applying Behr Bonding Primer No. 880 before 1-Part Epoxy will help increase adhesion.

                              Please contact Behr's Customer Care Department for further assistance with this matter. We'd love to find a way to help.

                              Kindest regards,

                              Doris Behr
                                1 found this review helpful
                                Beautiful and easy to apply. Needed two coats and...
                                Beautiful and easy to apply. Needed two coats and moving anything heavy across it leaves scratches, but great for my basement workshop.
                                by
                                • Verified Purchase
                                Next day after painting, all paint is washed off
                                Painted in a morning, next day after light rain, all paint was washed out, nothing left. What kind of exterior paint can be washed out next day after rain??? Not only it washed out, but also stained pool and all areas around. Horrible.
                                by
                                Response from BehrFeb 9, 2021
                                Hi Telebeep,

                                Thank you for reviewing Behr 1-Part Epoxy. I'm very sorry to hear that it was washed away. We recommend allowing the paint to dry for at least 24 hours before rain exposure. A longer dry time is sometimes necessary in cooler weather/humidity above 50%. I completely understand how disappointing this experience must be and encourage you to contact Behr directly. We'd love to find a way to help!

                                Kindest regards,

                                Doris Behr
                                  I used this to paint the floor in the bathroom of my Recording Studio and am very pleased! Tied t...
                                  I used this to paint the floor in the bathroom of my Recording Studio and am very pleased! Tied the whole room together...
                                  by
                                  • Verified Purchase
                                  • Recommended
                                  I really like color the Behr Premium concrete epoxy added...
                                  I really like color the Behr Premium concrete epoxy added to my basement floor. My basement floor went from yuck to pleasant with surprisingly little effort.
                                  by
                                  • Verified Purchase
                                  Showing 1-30 of 1,091 reviews

                                  Frequently Bought Together

                                  +
                                  +
                                  Price:
                                  $43.98

                                  Compare Similar Items

                                  current item

                                  Container Size

                                  1 Gallon

                                  1 Gallon

                                  1 Gallon

                                  1 Gallon

                                  Paint/Stain Features

                                  Chemical Resistant, Driveable Surface, Durable, High Foot Traffic, Mildew Resistant, Paint & Primer in One, Prevents hot tire pickup, Stain Resistant, UV/Fade Resistant, Washable

                                  Chemical Resistant, Driveable Surface, Durable, High Foot Traffic, Mildew Resistant, Paint & Primer in One, Prevents hot tire pickup, Stain Resistant, UV/Fade Resistant, Washable

                                  Chemical Resistant, Driveable Surface, Durable, High Foot Traffic, Mildew Resistant, Paint & Primer in One, Prevents hot tire pickup, Stain Resistant, UV/Fade Resistant, Washable

                                  Chemical Resistant, Driveable Surface, Durable, High Foot Traffic, Mildew Resistant, Paint & Primer in One, Prevents hot tire pickup, Stain Resistant, UV/Fade Resistant, Washable

                                  Base Material

                                  Epoxy

                                  Epoxy

                                  Epoxy

                                  Epoxy

                                  Coverage Area (sq. ft.)

                                  500

                                  500

                                  500

                                  500

                                  Sheen

                                  Satin

                                  Satin

                                  Satin

                                  Satin