Great drill bit! I was able to drill in tight quarters through a bunch of old 2x10’s like they’re nothing to run a line across a basement from a small sub panel. I’d recommend it in a heartbeat. It’s great for where you can’t fit the 18” drill bits. This picture is only a small fraction of how far I had to go.
by
Verified Purchase
Feb 13, 2018
If you need to drill a hole fast, then this bit is perfect. Auger bit was easily able to drill th...
If you need to drill a hole fast, then this bit is perfect. Auger bit was easily able to drill through my benchtop made of 3" maple using a 1/2" drive electric drill. The only downside was that it did not leave a smooth bore hole.
by
Verified Purchase
Recommended
1 found this review helpful
Mar 2, 2015
Bosh 1" Auger
This is one will do the job if you need to drill a 1" hole and if you happen to run in nail it will cut it like it wasn't there. The case that it comes with is nice. It's reusable and keeps if from bagging around in your tool box. Can't wait to use it again in my next bathroom project.
I've been happy with most of the Bosch drill bits I've used over the years, and so far this is no exception. It's tip lets you start your drilling location precisely, and it drills easily through wood. The base that attaches to the drill is hex-shaped rather than round, so you know it the drill will grab it without slipping. This drill comes in a nice plastic case you can use to store it in, so it won't be rubbing against other things in your tool box.
One thing to be aware of is that the total length of this drill bit is 7.5". You're going to loose about 1.5-1.75" of that into your drill for holding it, and there's about 0.75" at the tip used for starting the drilling process, so you can only go a little over 5" deep for actually drilling a 1" hole. Also note that the maximum-rated speed for this bit is 600 RPM.
The fiberglass insulation was really easy to use AND it did not fly apart as it often did in the past when installing. Also, the guy in the store helped me to figure and advised on which type I needed, size, and told me not to buy higher rating because all I had were 2 x 4s so I needed the R13. When I finished I had less than one piece left and even with the metal roof you can hear a pin drop in a heavy rain storm.
Main thing is the quality of the people working at Home Depot.
by
Verified Purchase
Recommended
Aug 26, 2022
by
Verified Purchase
Jan 6, 2022
by
Apr 13, 2021
Easy to use trough the wood and nails,also perfect size,great...
Easy to use trough the wood and nails,also perfect size,great purchase
by
Verified Purchase
Mar 6, 2021
Rips though wood with ease using my m18 super hawg
Rips though wood with ease using my m18 super hawg
by
Verified Purchase
Recommended
Jan 17, 2021
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Jan 14, 2021
Tip broke in first week I had it...
Tip broke in first week I had it
by
Verified Purchase
Nov 26, 2020
Advertised as a drill bit for drilling holes in stumps...
Advertised as a drill bit for drilling holes in stumps of trees. Will go in 1/4 of an inch.
by
Response from BoschToolsDec 1, 2020
Thank you for your review and we apologize for the negative experience you had with it. The NKST20 Auger Bit is designed for wood drilling. Yes, it can be used for the stumps of trees as well. Please let us know how we can better meet your expectations in the future. We look forward to hearing from you. You may return the bit back to the store within 30 days from the purchased date. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Verified Purchase
Jul 22, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Jul 15, 2020
Wiring a cabin, this bit did a great job!. It's self feeding and goes through studs like butter...
Wiring a cabin, this bit did a great job!. It's self feeding and goes through studs like butter. Too bad it's made in china
by
DIY
Verified Purchase
Recommended
Jul 15, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Jul 7, 2020
Great tool...
Great tool
by
Verified Purchase
Jul 3, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Jul 2, 2020
This thang right here eats. Best wood bit yet, in...
This thang right here eats. Best wood bit yet, in my experience with drilling lots of hole!
by
Verified Purchase
Jul 2, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Jul 1, 2020
Even on a Milwaukee Holehog with a 9.0 battery, this...
Even on a Milwaukee Holehog with a 9.0 battery, this thing barely drills through standard studs. Not impressed at all.
by
Response from BoschToolsJul 3, 2020
Good day! Thank you for posting your review on Homedepot.com website. We apologize about the negative experience you had with the bit. This NKST20 Auger Bit is designed to drill through wood even with nails. It is best to be used with a 3 jaw chuck drill driver not a hammer drill. You may need a titanium or black oxide for a stud drilling. You may return the bit back to the store within 30 days from the purchased date. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST. Thank you for your time.
Verified Purchase
Jun 16, 2020
Works great don’t have to worry so much about hitting...
Works great don’t have to worry so much about hitting a nail
by
Verified Purchase
Jun 10, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Jun 3, 2020
If you are installing things like big fence gates and...
If you are installing things like big fence gates and need a straight bore, there is nothing better. It provides a clean hole. Very durable. A professional bit.
by
Verified Purchase
Jun 1, 2020
Great bit! Fast, durable, awesome!...
Great bit! Fast, durable, awesome!
by
Verified Purchase
Apr 30, 2020
The piece is nice and heavy but the drilling is...
The piece is nice and heavy but the drilling is absolutely horrible. The splitting caused by this auger is vicious and one would need to go back and sand down all the splits. Never using this trash again. I’m returning it soon.
by
Response from BoschToolsMay 2, 2020
Hi there! We apologize about the negative experience you had with the bit. We'd like to help you with your concern about NKST20 Auger Bit. First, what's the material you were drilling? Did you use a 3 jaw chuck drill driver? Please give us a call at 1-877-267-2499 from Mon-Fri 7A-7P CST. We hope to hear from you. You may also return the bit to the store within 30 days from the purchase date. Thank you for your time.
Verified Purchase
Apr 21, 2020
Bit seemed to ware very fast, making it hard to...
Bit seemed to ware very fast, making it hard to get consistent holes.
by
Response from BoschToolsApr 21, 2020
I am writing to follow up on a recent review you posted on the HomeDepot.com website regarding the NKST20 Daredevil 1-1/4 in. x 7-1/2 in. Tube Auger Bit that you purchased. Home Depot is focused on ensuring complete customer satisfaction. As the manufacturer, we are very interested in supplying consumers with a quality product that delivers the expected performance. We are sorry to hear about the issue you experienced with the bit. Thank you for bringing this issue to our attention. We would like to send you a replacement to try out. Please write back with your name and shipping address to send that out to you. We are hopeful to hear from you and help you resolve the difficulties you've experienced. Thank you for your time.
Verified Purchase
Apr 16, 2020
Great for drilling holes in rough wood...
Great for drilling holes in rough wood
by
Verified Purchase
Apr 16, 2020
Great piece, doesn't give out....
Great piece, doesn't give out.
by
Verified Purchase
Apr 15, 2020
strong and sharp...the screw tip was perfect...it kept the drill bit in the exact spot where I wa...
strong and sharp...the screw tip was perfect...it kept the drill bit in the exact spot where I wanted to do the holes..Thanks to David in the hardware section @ the Pittsburg store for recommending the bit.