Customer Reviews for Bulbrite 60 - Watt Equivalent Soft White Light T7 (GY6.35) Bi-Pin, Dimmable Clear LED Light Bulb 3000K (2-Pack)

Light bulbs..... pretty simple....not much to say. T4 is a very specific size....so if you need it, and need it pretty bright, these are for you. Wish they were dimmable, but they are not. Came very well packaged and protected.... looks like a great bulb. Can't speak about how long they will last as I just got them. Nice to be able to find specialty bulbs from Home Depot.

The light bulbs come well packaged and right out the box they look well made. the enclosure looks sturdy enough to protect the LED's. The LED's are bright, as stated 60 watt equivalent. bringing out a warm white color (2700 temp) only using 5 watts. They come with a 5 year warranty. They are 12 V as I wanted since my pendants do show it requires 12V. It is easy to replace each bulb, only pull off the old one and push this one in and it will stay there. ( mine did) with 550 Lumens, they are bright.

The bulbs come well packaged and right out the box they look well made and with a nice enclosure. It replaced one of my pendants and I like that it saves me money, and it does not get too hot. It was easy to replace the old one, just pulled the old one out and pushed this one in. It is a warm white or soft color ( 3000 temperature ) and best of all I like that it comes with a 5 year warranty. I am using it indoor but it can be used outdoor as well. It looks neat.

35-WATT EQUIVALENT T4 DIMMABLE BI-PIN (G9) LED LIGHT BULB WARM WHITE (2-PACK) by Bulbrite I have no doubt that these are quality bulbs. Like so many other homeowners, I have been replacing halogen bulbs with LED bulbs. While halogen (or Xeon) create a really nice white light, bulbs are expensive, considering how often they need to be replaced. We have already gone thru two halogen bulbs in our new microwave. These LED bulbs are the same base and wattage equivalent as the halogen we use. And as they are dimmable, should allow for the two power setting choices. Alas, these bulbs are too long. I did not measure the space available in the microwave and these are way to long to fit. In addition, the HD website shows this bulb as many different SKUs, at least I cannot see any difference. So, check the actual space available for this bulb replacement. Lesson learned.

Wow, this is a super bright light. It provides a huge amount of illumination for only a couple of amps of power at twelve volts. It has a huge heat sink on the back which is a huge upgrade from my other LED lights. It should last much longer with that heat dissipation. It is 12 volt, so you cannot just plug it into a regular AC power source. It has the two prong base, so you have to make sure that it is the style that fits your light. So far I love it.

Elegant enough for a chandelier? That depends in my opinion. Either way, I’m pleased that Bulbrite has come up with an LED that can replace a T4, bi-pin (G9), dimmable halogen bulb. We have a few “blingy” chandeliers that use these bulbs, and being able to replace eight 40 watt halogen bulbs with these 4.5 Watt (35 watt equivalent) LEDs is a money saver. Each LED bulb provides 400 lumens and while rated as 35 Watt equivalent bulbs, they seem brighter than the 40 Watt halogen bulbs they’ve replaced. Color Temperature: The color temperature of these LEDs is 2700k per the packaging, but they lean more towards 3000k in my opinion. While most LEDs maintain their color temperature when dimmed, these LEDs appear to dim to a colder (leaning towards purple) temperature which may simply be an illusion being created by the chandelier crystals. The LEDs certainly don’t dim to amber (2200k) or dim as low as halogen bulbs, but the cooler color temperature improves visibility (just not ambience). The little led spots on the LEDs also add their own touch of extra sparkle to our fixtures. Size/Appearance: These LED bulbs are considerably larger than a T9 halogen bulb so depending on the application, they may not work for you. In my opinion, if used in a chandelier where the bulbs are visible, they’re an eyesore when the lights are off; however, when the chandelier is turned on they’re camouflaged by “bling” factor. If you’re using these bulbs in landscape lighting, signs or displays, the appearance of the bulb doesn’t matter. Dimming Capability: These LED bulbs work with our Lutron TG-600 toggle dimmers, which are intended for halogens and incandescent bulbs only. The bulbs do strobe a little while being dimmed, but I don’t notice any strobing/flickering once the dimmer is set. There are many factors involved that cause LEDs to strobe, for example, fixture compatibility (if there is a ballast in the fixture for the halogens), dimmer compatibility, and the quality of the LED components to name a few. I visited the Bulbrite website to check if the Lutron TG-600 dimmer is compatible with these bulbs, but the website only had fan speed control/dimmers listed for this product. That seems silly given the TG-600 dimmer is very common and sold at HD. Additionally I like that there is no buzzing from these bulbs. Price: The price for this two pack is high for two bulbs. Perhaps Bulbrite is using quality components or the cost to manufacture them is high. Either way, these bulbs are an investment and it will take a long time to recoup the cost in energy savings. Having said that, they’re expected to last 25,000 hours on average (22.8 years based on 3 hours a day of use) and come with a 5 year warranty. CRI: Given the price, I would have expected the CRI (color rendering index, aka the ability to reveal colors accurately), to be better than CRI>80%; however, I have yet to find a bulb in this size/shape with a CRI>90%. Application: These bulbs are indoor/outdoor, but should not be exposed directly to water or used in exit signs. They can be used in fully enclosed and recessed lumenaires according to the microscopic print on the box. Quality Control: I should mention that one of the two bulbs I received was defective. I put it in the fixture and it was a snug fit. When I tried to pull it out to reposition it, one of the bi-pins pulled out of the bulb and got stuck in the fixture (luckily I got it out without getting electrocuted). Bulbrite eventually replaced the bulb, but if it’s a recent purchase they recommend taking it back to the store and exchanging it. Defective bulb aside, I like these bulbs and they work well with our dimmers. Unlike halogens, I can touch them with bare hands without worrying they will explode due to skin oils like halogen bulbs (you’re supposed to wear gloves when changing a halogen bulb). Hopefully the price will come down in the future so they are more affordable and less of a long term investment.

The bulbs arrived on schedule and were installed right away. They fit the chandelier and emit a nice color. Unfortunately, all are flickering, despite being advertised as being dimmable. We'll just have to live with them, since they are the only 2-prong dimmable LED bulbs on the market.

I'm using six of these Bulbrite 35-Watt Equivalent T4 LEDs in outdoor entry scones. The 3000K is the perfect brightness. Respectfully submitted,

Rating provided by a verified purchaser

The light worked out

These are perfect replacements for the Halogen bulb that my pendant lights originally came with. They run much cooler and cheaper than the regular bulbs.

Plenty of light. Larger than a halogen bulb, so be sure it fits or that you can modify the lamp to make it work. Needs a good quality 12V supply - a 1990s vintage magnetic transformer is going to flicker. All manageable but, be aware.

Bulbs worked perfectly and are brighter than the expensive $70/each Tech Lighting bulbs they replaced.

Work great thus far. Bought cheap ones before this and they went out in a month...learn the hard way.

Works great as a replacement for the halogen.

This " 60-WATT EQUIVALENT T4 NON-DIMMABLE BI-PIN (GY6.35) LED LIGHT BULB WARM WHITE LIGHT " is a very specific application. I do not have the right fixture(not an everyday household item) to use these everyday but I did hook them up to a sample power source. They are very bright with no heat. I kept them on for 3-days just to do some kind of test and they are still going with no loss of color or brightness. Again the only reason I am not recommending them is that they are fixture specific and not anything standard.

This " 60-WATT EQUIVALENT T4 NON-DIMMABLE BI-PIN (GY6.35) LED LIGHT BULB WARM WHITE LIGHT " is a very specific application. I do not have the right fixture(not an everyday household item) to use these everyday but I did hook them up to a sample power source. They are very bright with no heat. I kept them on for 3-days just to do some kind of test and they are still going with no loss of color or brightness.

I have been looking for an LED bulb for a while that would fit into the small recessed light that is in our shower. The normal bulbs are not extremely bright and they only last a couple of months. I was happy to find this bulb and super excited to replace my shower bulb. The fitment is correct and tight to the socket. The light is much brighter than the incandescent bulbs I have been using for years. I look forward to the long bulb life I am accustomed to from other led bulbs. This is a great upgrade.

I got this product thinking, it has inbuilt 2-prong plug in. The title and the description both are vague. and unforuntately, that is not just with this product and at this website. it is across the board. After much research I understood this was a replacement blub for special blubs. it needs special base and conversion to e26 is not that easy. so, in reality, i have no use of this replacement bulb. And not be able to provide much feedback on how easy it is to replace or the light etc.

These 4.5 watt (35-watt equivalent) LED lights made by Bulbrite are very bright and fit perfect into my dinning room light fixture. My Elect. bill has dropped by about 25% or more by replacing all my light bulbs with LED bulbs. These LED bulbs cost only a little more the good light bulbs, but they save me money and they last so much longer ! Last year at this time my Elect.bill was over was over $200 a month, so far this year every month it's been under $70.00, it snows and gets very cold here. So every bit adds up.

The shipping was very prompt and packaging excellent. The best way to use this bulb is in a hard wired T4 light fixture. It also needs a dimmer in order to make it dimmable. The bulb is easy to install in any T4 light fixture, just snap the old bulb out and snap the new one in. Some of the T4 light fixtures need a special adapter in order to install this bulb, unfortunately it is not very easy to find one. The bulb gives a very pleasant colour and provides more than enough light.

We originally had Halogen bulbs in our kitchen pendants over our kitchen island. The Halogen bulbs make the area extremely hot. These LED replacements however are giving off just as much light with them being 35 watt equivalents, however with the dimmer in place they can be adjusted to any light level as well as the area no longer feels like you are sitting at the restaurant warmer.

This LED wafer is about 1" in diameter. It has 18 square LEDs about 1/8" each. It has a G4 connection, and operates on 12 volts, and uses only 2.8 watts. It is not dimmable. It easily fit in my desk lamp that originally came with a 30 watt halogen light bulb. I was skeptical that the LED wafer would produce enough light, but I was pleased with the bright and pleasing illumination it produced. I recommend this LED wafer.

This bulb was perfect for making a shadow cut line setup for my mitersaw. It's about an inch across, and can fit on the upper side of the blade guard. Most other LEDs weren't wide enough to cast a good shadow on either side of the blade, but this one was. It's pretty bright too, even though I'm running it with a 12V@1A power supply, when to utilize the full 28W I should really be running it at 12V@2.1A.

Nice, compact, BRIGHT. Have not had it long enough to judge it's longevity but it is actually an improvement over the incandescent it replaced. Although the individual LEDs are visible you can not see them when the lamp is on. Be careful though. I looks just like some low voltage lamps I use in my outdoor lighting. But these are LINE VOLTAGE lamps. They will not work in low voltage scenarios. All in all an excellent, money saving alternative to incandesents and halogens.

Bulbs were OK, but had a very severe flicker in my 12v pendant lights. Not sure what the problem is, but perhaps there is not enough load on the existing transformers? Really hoped this would work!