Customer Reviews for Custom Building Products Polyblend #19 Pewter 10.5 oz. Sanded Ceramic Tile Caulk

Installed around a roman tub new install. Cured it for over 48 hours. Looked sort of rough BUT a bit of water got on the grout (after curing) as the faucets were installed. Melted like it was fresh. Took it back and will use regular silicone white caulk. Smallish difference in color as well. Not that bad but the curing was the problem.

Great grout to use with Travisano Trevi 12x12 porcelain floor and wall tiles!

I love this when I have a joint between tile and a tub.

I bought this caulking to use between my tile and firplace. The gray matched the mortar between the bricks. Caulk went on smooth. Love that you can get this in colors!

Product was a perfect match to the labeled Polyblend #145 Light Smoke Fusion grout. Polyblend did a very nice job on matching sanded texture and color.

I had grouted with pewter grout and also used the grout around my tub. When the tub was full of water we noticed a small crack in the grout that wouldn't be noticeable with no water in the tub. So I bought the matching caulk and used it over the grout around the tub. It worked great and is flexible enough that the crack is sealed up.

This sanded caulk is the best material I've found for tile-to-tub (or sink), and tile-to-countertop joints. I used one color that worked perfectly in my new kitchen where the granite counters meet the travertine back splash - it looks great there. I used the white sanded caulk in a bathroom where there is an unusually large gap between the tub and the tile surround (see photo). Grout would always crack, and regular bathroom caulk would always peel. Though the gap is so large that nothing looks great filling it, the sanded caulk is the best solution I've found for that problem area. Though it is intended for gaps of 1/4" or less, in my experience it can be applied in layers/stages to build up material to fill much larger gaps if necessary.

Good tile caulk. Bought online because HD does not stock this color even though they stock the quartz grout. To save time they should stock both products in the same color.

The #101 caulk is the perfect match to the polyblend #101 grout. Easy to work with just a wet finger.

Great stuff for sealing around sink and to use as a touch up, easy to use!!

Just finished our bathroom tub surround. we ripped out the old tile and "Sheetrock".. (house was built in 1978), put in Hardie board, sealed, caulked corners, tiled and grouted. I used the sanded grout in Sandstone in the corners and under the tile around the tub. After five days it was still gummy and didn't quite dry in places. Plus, I read where this is nowhere near as long lasting as silicone in wet places. So what I did was take some white silicone tub caulk and squeeze out about 1/2 a tube on a piece of disposable tile, and mixed sanded grout in it with it with a putty knife. Then I put it in a cake decorating bag and squeezed it in the joint. (I used painters tape and taped the area off, top and bottom ). I used my finger dipped in mineral spirits and smoothed the grout mix, pulled off the tape, and smoothed it again. Now I have a siliconed , grout strengthened seal. Please note that the color the mix is wet, is the actual color it will be dry!!! It was easy, and I will do this every time instead of wasting my money on this acrylic stuff!!

The product was excellent. The only drawback was that although Home Depot stocks the same color grout in-store, this caulk was a special order, as it is NOT carried in-store, and I was required to buy this "On Line" and had to pay shipping which nearly doubled the price of the product or wait three weeks to get it delivered to the store. Value would have been "Excellent" except for the additional shipping cost.

Bought it assuming that you buy a sealant to do something besides be the right color. Went on beautiful, then proceeded to shrink to failure. Thanks for the quality work.

This product is really great for sealing and matching grout for wet or dry tile applications

The product was applied as instructed and closely matched the grout it was used with. It lasted 9 months before cracking in various places and allowing mildew.

So easy to use and blends perfectly to cover cracks in original tile grout.

Perfect when using to fill grout cracks and spaces. When dried it looks like the original grout used. Highly recommend!

This was easy to work with and had great results!

I can’t really read the product as it has not been used. I can say that Customer Service representatives at Home Depot were very helpful and helping me with stocking information and helping me to find the product in the store. After usage, I should be able to rate the product.

It’s good to use in bathroom

Exact match and look to the current grout I have on my tile shower. Very easy to use and fast drying.

Taking about 24 hours to completed dry. My bath shower is now looking new again.

This is the best product for reseal the bathroom’s floor and the wall than silicon. I was glad Home Depot’s staff recommended this product when I mentioned the silicon sealer was not last long.