Customer Reviews for DAP Silicone Max 10.1 oz. Clear Premium Exterior/Interior Window, Door and Siding Silicone Sealant
- Ideal for sealing around windows, doors, siding and trim.
- Weatherproof seal that maintains strong flexibility and adhesion
- Premium silicone sealant that is rain ready in 30 minutes
Customer Reviews
Aug 3, 2020
Wrong color inside tub
I wanted GE brand but had to settle for this. The label was printed as CLEAR. When I got home it was White.
by Jiim
Response from DAPProductExpertAug 5, 2020
Thank you for posting your feedback. We're sorry to see your low star review. We are not clear as to your commentary, as you appear to be describing another/different product/formula than DAP Silicone Max. At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you, when calling in, please have the product package available, as we will need to collect production information from it.
Oct 5, 2017
I use this clear silicone where I want a nearly invisible, flexible, waterproof seal such as coun...
I use this clear silicone where I want a nearly invisible, flexible, waterproof seal such as counters, sinks, door jambs, and window. As this is silicone it is not paintable - paint will slide off it. It also requires ventilation as it emits some fumes. Use at above 40 degrees F and is waterproof in 24 hours. The instructions are complete with usage and warnings.
by DIYBob
Apr 18, 2021
wouldn’t come out
First tube, squeezed the caulk gun and nothing came out of the tip but came out the backside. Second tube, works but only dispense about 1 inch of coverage then stop. Not sure what’s going on with these tubes
by tony
Response from DAPProductExpertApr 19, 2021
Thank you for posting your feedback. We're sorry to see your low star review on DAP Silicone Max. Based on your commentary: "squeezed the caulk gun and nothing came out of the tip but came out the backside" would likely indicate that the inner foil seal was not broken/punctured prior to attempting to apply the product. As indicated on the product package label guidance and supporting product literature: "2. Cut nozzle at a 45º angle to desired bead size. 3. Puncture inner foil seal. 4. Load into caulk gun. 5. Fill gap with sealant, pushing sealant ahead of nozzle." At your convenience, please contact DAP’s Technical Customer Service Department at 888-327-8477 so that we can obtain some additional information from you and to offer some additional usage guidance.