Customer Reviews for DEWALT 15 Amp Corded 10 in. Compact Job Site Table Saw with Site-Pro Modular Guarding System

I've only had this tool a for a few days but put it right to use. Started off building a cabinet/stand for it as you see in the photo. The saw works great. The dust port is very helpful and really kept the mess down compared to my previous saw. I love the ease to adjust the fence; having two geared rollers keeps the fence very precise as well. An awesome upgrade to my collection! Looking forward to MANY years of enjoyment.

Solid compact and portable table saw for pros and DIYers. It has the quality I have come to expect from DeWalt with a powerful motor, solid construction and brass gears. It features a 24" cross cut, stable fence, angled cuts and a 4,800 rpm 15 amp motor. I do intermediate-level DIY carpentry and I have found a table saw to be one of my more important tools, its uses are endless. From making trim to dadoing (without a dado blade) to precisely ripping boards for furniture, this is a great tool. The saw's fence, arguably the most important part, is very solid which ensures a great cut. Don't get a cheap table saw with an unstable fence, you will regret it! According to the instructions, this saw is not meant for dado blade use although I see some reviewers used it with stacked dado blades. For my first job with this saw, I built a lighthouse which required ripping over 150 separate boards. The saw, which comes with a nice blade, cut them all well and precisely. I did mitered cuts and ripped trim as well. Whether blade height, rip width and miter angle, the settings were easy to adjust on the saw and help firm during cutting. The dust extractor handles the vast majority of the saw dust and clean up after jobs is minimal. At just shy of 54 lbs., it is a bit heavy to carry but I find I can move it with relative ease in and out of my basement. Cord is 2-prong. My saw was missing the fine adjustment knob for the fence and DeWalt quickly shipped me one after contacting customer support. The saw also comes with a blade guard that attaches easily and provides a safe cut along with an anti-kickback assembly and push-through tool for increased safety as well. The 10" blade that comes with the saw has a 0.98" kerf and the riving knife is 0.110" wide. Other accessories are a bevel cross-cutting tool which is create for cuts like a hexagon and wrenches for replacing the blade, etc. This is my second table saw; the other being the DeWalt 60v FlexVolt. The main differences are this saw has a larger table; the FlexVolt is quieter (brushless motor) and cuts better with 5,800 RPM.

[This review was collected as part of a promotion.] I bought this to start doing some household projects and furniture. The saw is easily adjustable and comes with the wrenches to replace the blades. The fence is extremely easy to adjust with the wheel and the measurements are easy to read. Handled my dado blades well. Probably my most favorite feature is the kick stop. When you’re leaning over the saw after making a cut it is much easier and safer to be able to stop the saw with your knee.

DWE7480 Great Portable Table Saw. But it’s also a great stationary Saw. I‘ve had this table saw almost a year now and I have cut many 2X4’s 4X4’s and many sheets of ¼” to ¾’ plywood. I mounted it on my work bench to make it easier to cut larger pieces like 4’X8’sheets plywood and I’m able to cut plywood up to 24’ wide. Although it’s designed for mobility it works perfect mounted to my bench. It’s easy to use and has a dust control port. I ‘am completely satisfied with this product and I highly recommend it

Excellent saw. I had to return 2 Ridgid saws before switching to this brand. Night and day difference, and only $65 more. The blade stays in alignment and only needed minor adjustments from the factory. The table surface is slightly sunken/warped in the middle, less than 1/32", it doesn't affect my work, wasn't worth returning for me. The fence system is great, very easy to adjust, and the fact that you can make adjustments to keep the fence parallel to the blade/miter slots is awesome. The fence that came with the saw was slightly warped in the middle as well, very minimal. But DeWalt support was amazing, very fast, and sent me a replacement with no problems and the new fence is perfect. The blade housing is great, made out of metal, totally sealed up, limits dust spreading everywhere when using a vac. Would, and have, recommended this saw, totally worth it. Just build yourself a stand with out-feed support and you're good to go.

Very solid little saw! The stand is awesome and study. It's a little loud but that's to be expected coming from a cast iron contractors saw. The fence is very accurate as well.

The saw cuts great and is accurate. The stand is awesome! The only complaint I have is the throat plate has some non adjustable slop in it. I'm very happy with the purchase.

Bought this saw with the DW7440RS stand on sale. Description says 24.5 inch right rip capacity. It's not. At best 24.25 inch based on the rail's teeth. Could not get it to move to 24.5. Per DeWalt's spec, it's listed as 24 inch. However, it can really be more than 24 by adjusting the alignment screw. Mines came out of the box needed a bit of adjustment. The measurement indicator and both right screw for the fence was off by 1/8th inch. the blade was not 90 degree and the riving blade was not lined up with the blade. Overall, I'm happy with the purchase as it was on sale and for what i do, this is more than enough.

It is very nice machine. However, the rubber stoppers, leave oil like markings on the cement floor, that I could not clean with soap and water.

I purchased the 7480 a couple of weeks ago. Setup: extremely simple. blade was pre-installed. blade was dead-on 90 degrees with the table and exactly parallel to the fence. Cuts: easy ripping and clean cuts. Note: rather than get the stand, I built a platform that brought the table saw level with my existing portable workbench. I highly recommend this baby.

[This review was collected as part of a promotion.] I bought this table saw 3 years ago to start building furniture as a side gig. I have ripped plenty of 4x8 sheet goods up to 1" thick, 12' lengths of 8/4 maple, and even some smaller more precise work. This saw, with the help of an outfeed table, has been able to handle everything I have thrown at it with accuracy. I typically have a fine finish blade mounted and even still there is power to spare when cutting hardwoods. No this saw can and will not keep up with a large cabinet saw or fit stacked dados but I don't need it to. The best part is once I am done using it I can collapse the wheeled Dewalt stand I purchased separately and move it out the way. My 2" shop vac hose fits the dust port perfectly and does a pretty good job of collecting all the sawdust. I think out of all the features the rack and pinion fence is the most notable. Extremely easy to use and make small adjustments between cuts when needed. Would absolutely recommend it to someone who is looking for a powerful, accurate, and portable saw.

[This review was collected as part of a promotion.] Really like the easy knife removal/install. Blade access is nice also with the 1/4 turn throat plate lock. Plenty of power! Onboard storage is really handy too!

Awesome saw. Ripped a 2x4 perfect right out of the box. Cut with zero effort. Only complaint is wish it came with a dust catch bag but it does have the port to hook up to a shop vac (however my vacs hose is too small). Other than that it's a great saw. I mounted my saw on some 2x6 scrap for stability until I can buy a stand

I researched table saws and this one was one that was highly rated. I have used it several times and it far exceeds expectations, I would highly recommend this product, thanks DeWalt..

Very easy setup and has so far been a joy to use! I had done much research on table saws and had decided to get this DeWalt. It's size and portability is perfect for my woodworking hobby in retirement. The cuts are accurate and easy to set measurements! The rack/pinion adjustment is the greatest feature for me! Great saw and would strongly recommend for anyone!

I really put mine to work recently. I was a little worried of the work load but it held up so well. I'm very impressed with this table saw.

Am completely satisfied with this saw, works great has plenty of features and power. I don't think I will be worrying about kickbacks too much anymore. I bought this saw because of no safety features on old saw. I love the knob to adjust the fence and it was really accurate when I made 1st cut. Can't say enough.

***TWO THUMBS UP*** After many hours researching online, I came across this Dewalt Table Saw at my local home depot and completely felt in loved with it! The main thing that convinced me to buy this saw is the rack and pinion fence. Many, if not all of the other contractor table saws have a fence that rides on rails which causes the back of the rail to be dis aligned. In my case, I'm not planning to move my table saw out of my shop so I built a pretty cool table that extends the work surface allowing me to work on bigger pieces.

It makes my job easier and faster, I do a lot of wood cutting and it makes my job easier, I am a owner of my own business and since I purchase the item it has improve a lot my business.

Extremely happy with this saw. Built into my workbench with a large out-feed table and has been a great workhorse. I mostly use mine for rip cuts, and would recommend to anyone looking to make big cuts on a budget. Fence feels sturdy and accurate. All around solid unit.

Tons of power, nice guard system, got the wheel stand with it, folds away nicely.

Nice rack and pinion design.

I just got this saw and it didn't come with a set of saw blade wrenches or miter gauge. I have not used it yet, it did sound good when I turned it on.

I really like Dewalt tools; but, I am disappointed that this saw does not have a dado capability.

Works great!

Its a cool table saw for DIY basement finishing and other small home projects

Better than expected. Not as heavy to carry as I assumed initiall

Does everything I needed and then some

I only used the saw a couple of times so far, but it seems very well made. I wish there was a place to store the safety guards somewhere on the saw body though when they are not attached to the top.

Very nicely built and easy to transport.