#1 Home Improvement Retailer

Customer Reviews for DIABLO 5/8 in. x 17-1/2 in. High Speed Steel Auger Bit

Internet #313022195

Model #DAG3050

Store SKU #1005310854

  • Use in corded or cordless impact & drill drivers
  • Use to drill in clean & nail-embedded wood
  • Deep flutes for enhanced chip removal & more holes per charge

Customer Reviews

  • 4.3
    out of 519 reviews
  • 74% recommend this product
Filter by:
Showing 1-30 of 519 reviews
Wrong size
Really its not HD’s fault. I ordered a 3/8” auger bit, the package says 3/8”, even the drill bit has 3/8” etched on it, however the actual size of the bit is 5/16”. Quality control at Diablo needs to be tightened up
by
Response from DiabloProductExpertApr 10, 2023
Hi Alex! Thank you for bringing this to our attention. Your feedback helps us get better! We apologize for the frustration and will be sharing your thoughts with the team for review. Please let us know what we can do to help improve your experience in the meantime: https://www.diablotools.com/contact
    • Recommended
    Great bit at an even better price.
    I needed a good 1/2 auger bit for drilling holes for mounting my new tv. I was not wanting to spend a bunch of money and have always had great luck with Diablo brand products. The drill bit went thru my shiplap and studs no problem.
    by
      • Recommended
      Good Bit as long as drill has enough torque to pull it.
      Bought this bit for tree killing and root killing yes its overkill but thats OK. Works great as long as your drill has enough balls to pull it in. Drill damage is not the bits fault. It's the users.
      by
        • Recommended
        2 found this review helpful
        Cheap materials
        I'm a residential electrician, have a lot of drilling in new homes. I purchased this bit hoping it would perform. It did not. The bit is labeled as nail embedded wood, the first bit I purchased made it through 2½ houses before the tip snapped off, making it very difficult to finish the job. I then exchanged it for a new one. Out of the package it made 13½ total holes before the tip snapped again. I'm drilling new 2x4 and 2x6 some with nails from framing. Soft wood. It touches a nail and it's broken. Would not recommend or purchase again.
        by
        Response from DiabloProductExpertMay 3, 2021
        Thank you for posting! We're sorry you've had such a challenging experience thus far. Please know that we stand behind the quality of our products and we're here to help. We hope you'll give us a call and an opportunity to make this right: call 800-334-4107 or email customerservice@diablotools.com. We look forward to speaking with you!
          7 found this review helpful
          I bought this auger for our technicians who routinely have to drill into utility Poles to mount h...
          I bought this auger for our technicians who routinely have to drill into utility Poles to mount hardware. So far so good. Very sharp and chews through wood very quickly, time will tell as to how long it stays that way. Really can't go wrong for the price and being available at your local home depot store.
          by
          • Verified Purchase
          • Recommended
          I was experimenting with a way of adding low voltage lighting to 4x4 fence posts. I wanted to hid...
          I was experimenting with a way of adding low voltage lighting to 4x4 fence posts. I wanted to hide the wiring inside the posts so I needed a long drill bit. I choose the Diablo 3/4 in. Auger bit as I felt it would get the job done and be versatile enough for future projects (Tree house). Boring diagonally, the bit came out about 10 inches down, but straight down it reached 15 inches. My plan is to run the cable though the PVC railing and then down the inner wooden post about 10 inches. Note: The bit cuts fast, after about 5-6 inches I had to back it out to get all the chips out before continuing.
          by
          • Recommended
          1 found this review helpful
          I occasionally need long reach wood bits and this Diablo 3/4 inch x 17.5 inch bit will come in ha...
          I occasionally need long reach wood bits and this Diablo 3/4 inch x 17.5 inch bit will come in handy. It has a 7/16 hex shank and bests works in a drill that you can operate with two hands because of the extra torque it takes to drill a 3/4 inch diameter hole in most thicker woods. The 7/16 hex shank worked perfectly with my quick release 7/16 hex shank drill. You could use this auger in a lighter drill, if your drilling thinner boards or drill slower. The maximum listed RPM is 600. The auger is designed for nail embedded wood/boards and seems very durable and strong. Overall I am very pleased and expect to use this auger bit for several years.
          by
          • Recommended
          1 found this review helpful
          Great ship auger. I drilled through a cured maple log no problem. The bit was still sharp and the...
          Great ship auger. I drilled through a cured maple log no problem. The bit was still sharp and the pulling threads on the tip were too. It then drilled clean holes through studs without splitting them. This is designed to work with a quick connect drill chuck or regular chuck. It comes with a decent case that holds the base secure so that the bit tip doesn’t poke a hole in the end of the case and become exposed.
          by
          • Recommended
          I don't use auger bits on a daily basis. I got this one because of it's length. I've got a spec...
          I don't use auger bits on a daily basis. I got this one because of it's length. I've got a special project where I need to drill 3/4" inch diameter holes lengthwise about 16 inches through 4x4s. This bit keeps its edge so much better than the cheap, no-name brands. After 25 holes, it's still cutting like brand new. I love the carrying case. Throwing an expensive bit in the bottom of my toolbox bothers me. If I invest this much money, I don't want it getting damaged by other bits and objects. There is nothing wrong for me to report. Just a heads up, this large bit will drain 18V batteries quick. If you intend to drill many holes, go corded or have a few batteries as backup. Next thing, because of its length (contact surface area), it can bind. If your drill has a side handle, you may want to attach it out and avoid high speeds.
          by
          • Recommended
          1 found this review helpful
          I needed a long auger bit to drill through several garage door headers prior to wiring up some ca...
          I needed a long auger bit to drill through several garage door headers prior to wiring up some can lights over the doors, so I decided to give this DIABLO 3/4 in. x 17-1/2 in. Auger Bit a try. The long length of this bit makes drilling overhead through a thick header easy and convenient. The bit is self-feeding and bores through framing lumber almost effortlessly. Waste is pushed out of the cutting area efficiently so the bit keeps going without frequent removal to clear the chips. This bit is rated for use on nail-embeded wood, so it is appropriate for a range of electrical and plumbing projects. I've owned a number of Diablo bits and have always found them to be strong and long-lasting. I'm pleased with this product - highly recommended!
          by
          • Recommended
          5 found this review helpful
          This one of the best drill bits I have ever owned. Goes through hardwood without putting pressu...
          This one of the best drill bits I have ever owned. Goes through hardwood without putting pressure down on the drill. Stays sharp so far. Holes are smooth and not ragged as some other bits. Carrying case to protect the bit is a great addition. Flat spots on the shank that make the drill grab and get full power without slipping in the Chuck. I highly recommend this bit!
          by
          • Recommended
          The Diablo 3/4 inch x 17 1/2 inch auger bit is a great auger bit for drilling deep holes needed to run electrical cables and copper and plastic PEX water pipes. The long bit makes it easier to cut through multiple floor and wall joists where two or three beams are between floors. The Dura-Tip makes starting holes easier and more accurate. Dual cutting edges make cutting easier and help move wood chips out the deep flutes on the bit. It's never a good idea to hit a nail when drilling if possible but this bit is durable enough to be used in nail embedded wood. A heavy duty 1/2 inch drill is almost a necessity as this bit really grabs into the wood and moves quickly. The hex shaped shank on the bit locks easily on to the drill chuck and wont slip under heavy loads. You can feel the high torque as it cuts and a two handled drill would be recommended. I have used similar types of long drills, both regular drills and spade bits but this auger type is the easiest and quickest way to get the job done. I expect this drill bit to last a long time
          by
          • Recommended
          1 found this review helpful
          DURABLE I received my Diablo auger bit today; it measures 3/4 in. X 17-1/2 in. long. This auger bit will work in wood with nails, which is a useful feature for any auger bit. I use these Diablo auger bits to go through garage door headers to add electrical, usually for coach lights. I have found any cutting tool made by Diablo works exceptionally well. Overall, these auger bits are long-lasting and cut fast even in nail-embedded wood.
          by
          • Recommended
          1 found this review helpful
          This is a high quality, extra long auger that will take care of many of your boring needs. I use ...
          This is a high quality, extra long auger that will take care of many of your boring needs. I use it for running electrical and PEX plumbing. It is especially helpful to be able to drill top plates in 8 foot high walls while standing on the ground. The hex-shaped chuck area is a real benefit because there is no slipping, especially on key-less chucks. The self-feeding auger screw at the front has coarse threads so it pulls strongly in soft framing lumber like Pine or Fir. The coated flutes help the shavings feed out of the hole and reduce clogging and jamming. These are a great tool for your electrical and plumbing setups..
          by
          • Recommended
          This week I tested the Diablo 3/4" x 17 1/2" auger drill bit. The bit is very aggressive in dril...
          This week I tested the Diablo 3/4" x 17 1/2" auger drill bit. The bit is very aggressive in drilling through thick, potentially nail-embedded wood such as beams. However, there is a very high torque effect as one is drilling. I highly recommend using a slow speed heavy duty 1/2" drill that provides a 2 hand grip on the tool. The drill will have a tendency to twist in one's hands so a firm grip at all times is required. Secondly, ensure that the screw tip is in direct contact with the material when you begin drilling. The tip will immediately penetrate the material and pull itself through. I think the product would be ideal for plumbers, electricians, and carpenters who must drill materials in less than accessible locations. The extra length gets the bit where a drill often cannot reach.
          by
          • Recommended
          This drill bit struggled in a sill plate and 3/4 OSB. It didn’t break, but I seriously questioned its fortitude with a hole hawg driving it. It ended up with a lot of chips and kinks along the drill flute.
          by
          • Verified Purchase
          by
          • Verified Purchase
          by
          • Verified Purchase
          Very sturdy and easy to use with my RIDGID mud mixer drill. Used it to drill holes for rebars into 17 inch of wood boards. More than 50 holes in 3 hours and no problem at all. It was fast. Price around $20 compared to other brands it was a good price not too expensive. Excellent quality. I like the fact that you can reuse the packaging to protect the drill bit once you're done and put it away.
          by
          • Verified Purchase
          by
          • Verified Purchase
          Great drill bit
          Purchased this when I was making a few benches for our property. The drill bit is true to size as a 1/2" bolt slides in the hole as intended. Highly recommend.
          by
            • Recommended
            by
            • Verified Purchase
            by
            • Verified Purchase
            This is a very sharp bit and cuts like a hot knife thru butter
            by
            • Verified Purchase
            by
            • Verified Purchase
            by
            • Verified Purchase
            by
            • Verified Purchase
            by
            • Verified Purchase
            by
            • Verified Purchase
            by
            • Verified Purchase
            Showing 1-30 of 519 reviews

            Frequently Bought Together

            +
            +
            Price:
            $29.97