I really like the styling of this 3-light fixture from Designers Fountain. he fixture is lighter in weight than I expected it would be, and is lighter than it looks, but is well constructed of metal with a highly polished and shiny chrome finish. The fixture has 3 white frosted bell shaped glass shades, each of which is held on with a threaded metal ring. The base of the shades is wide, allowing ample space for hands to thread the metal retaining ring onto the ceramic socket. The shades can be mounted up towards the ceiling or towards the floor. What’s unique about this light is that the depth of the shades can be adjusted to a maximum depth of 10-inches by adjusting a set screw in the escutcheon housing, to account for a wall-mount medicine cabinet where a shallow light might not reach over the cabinet. There is however no mention of this feature or the set screw that needs to be loosened and tightened to adjust the depth in the installation instructions. The lamp sockets are ceramic and accept standard bulbs up to 100 watts each, for a total of up to 300 watts, which is a good amount of light output especially for a small bathroom. Installation instructions, a wall mounting plate, and wire nuts are included. This fixture must be hardwired. It’s a standard 2-wire installation, black, white, and a ground. My light came with wire nuts wrapped tightly with electrical tape, with extra wire pig tailed. I suspect this was to make up for a short fall in wire that would be needed if the depth of the shades was fully-extended out. While the installation instructions could be better written, I’m very satisfied with the appearance and performance of this lighting fixture, and highly recommend it.
Pros: Easy to Assemble, Functional, Looks Great, Stylish, Well Made
Cons: installation and assembly instructions