Customer Reviews for DuctlessAire 3 in. x 7.5 ft. Cover Kit for Air Conditioner and Heat Pump Line Sets - Ductless Mini Split or Central

This is a must to make your install look clean and to protect your pipe and wiring

When I ordered a Mr. Cool mini-split, HD had this trim kit as a recommended product. I like to looks of it so I included it in my order. It was a bad assumption that HD is recommended parts that match! The Mr. Cool mini-split system typically connects the refrigerant lines outside the building. This is a VERY bulky connection, that gets wrapped with a sound deadening material and then a layer of insulation. This bulking connection doesn't have a hope of fitting inside this trim kit.

It was so easy to install and it was a great price

I installed 2 Ductless air units in my two story detatched garage. The 2nd floor is an office fo my business and the 1st floor is a garage/wood shop. installation of the ductless Air cover was a breeze.

This product was easy to install, and gave our DuctlessAire Mini Split installation a really clean look. I felt like it was a very good value, and I would utilize again on a future product.

This product is perfect works exactly as described and very easy to install

I purchased the DuctlessAire Cover kit to use with the DuctlessAire DIY Mini-split system. Item shipped directly to the store for my pickup with no issues. When installing the cover kit be sure to use the ridge located inside the covers (wall, adapt couplings and end cap). If the tubing is not below the ridge in the covers they will not close/fasten properly. This information is not included/noted in the one page directions received. It took us awhile to figure out why the covers were not closing/fastening properly. This was very frustrating to figure out, in addition the tubing is not easily taken apart while hanging with the mini-split cables inside which added to our frustration. In all this product provides a professional look upon completion. The missing information in the directions is why 4 out of 5 stars was given.

My wife and I purchased a Ductless Aire package which included two cover kits. The covers are great and easy to install. They do a great job in finalizing the installation. I called the company in S.C.. Diane was very helpful - I purchased two flex elbows. Received the elbows in three days. As you can see the project is complete!

This product was super easy to install! Nice and professional appearance after installation! Kind of wish the connector to the wall was designed to accommodate the slant of the pipe coming out of the wall. It was hard to set connecting unit firmly against the wall because of that.

Looks good and esay installation

The 3 inch kit is what i got. Its a little tight for 5/8 3/8 and condensate pipe but we did get it covered. Worked and looks great

This product provides a perfect way to cover and protect line sets for mini split ductless air conditioners. Easy to install and cut to correct length. Includes necessary hardware, backplates, covers, top cap, bottom cap, and joint covers. Easily accommodates high pressure lines, low pressure lines, drain line, and electrical wiring. See attached photos with covers removed to show how lines set can be accommodated.

We had this cover kit installed over our mini-split lines which went from ground level to just under the overhang on the front of our house. Today I will be painting the cover to match the siding to maximize the cover-up benefit of this kit. I chose to use this optional cover kit and have the compressor unit installed on the ground rather than use the optional bracket kit and have the compressor installed up high outside opposite the air handler inside which would have negated the need for visible compressor lines on the house exterior. The compressor unit is quite large and by putting it on the ground and being able to hide it with fence or bush along with using the line cover kit to lessen the visibility of the lines, I believe we have the best scenario for maintaining the best “look” possible for the front of our house.

Easy installation. All parts included and looks good. I installed on existing lines. I cut the part that lays against the wall and slipped over the A/C lines. I trimmed minor excess plastic to allow coupling to mate. Happy customer!

These covers definitely enhanced the installation and made the finished look very professional while protecting the line set from the elements. Highly recommend buying these. Just could have used a right angle elbow.

Pretty easy to use, had to modify some of the mounts to work with what I was doing. would nice if they offered 45 degree turns so that you could add on to it.

Just one problem. You need to tell people that you need this before they put the unit in. The top cap cannot be put on an already installed unit. Unless your prepared to make adjustments.Other than that it's great.

Well made, easy to install

The product quality seems to be good. The problems are the installation instructions are terrible. You can not install this without either disconnecting the air conditioner lines or you have to cut the cover. The instructions do not say anything about this.

Did what it was supposed to do Easy install and looks great

A really good product strong and looks very well made. It was not hard putting the parts together , I am well pleased with the Ductless Aire Cover Kit. Renee in Customer Service was very helpful.

Great product easy to manage and results are professional looking