Customer Reviews for Everbilt 1/2 in. Mesh x 3 ft. x 25 ft. 19-Gauge Galvanized Steel Hardware Cloth

This product was installed at the bottom of our raised gardening beds with weed blocking fabric over it to keep the garden soil in the box. It was the perfect width for the boxes and was installed with little problem. We also used the wider size of this same product to cover the ground in our new green house to keep those pesky gophers and squirrels out of it. We covered the screen with weed blocker and then 3 inches of DG compacted to create the floor. The entire structure was wrapped in the wider size with about 10 inches of it protecting the sides of the greenhouse. I don't think we'll have pesky critters eating our vegetables now!

We bought this for a catio project (an outdoor caged in area for cats) and it worked well. It worked well and only occasionally did the staple gun cut through the wire and we'd have to staple in another spot.

With this cloth, I fashion two metal cages to keep squirrels, chipmunks and birds off my strawberries. It worked great. I did have to build a wooden frame for the base of the rectangle cage for support as the chipmunks could still sneak under it. The cloth is sometimes tricky to work with so be careful. It also leaves a dirty residue on your hands. I used the left overs to make tree protectors for saplings I planted as the deer love to eat them.

I bought this just to put in my planters to keep gophers from tunneling in. it was the correct width but I had to cut it to length and used an angle grinder which worked fine but tin snips would work too. I will not find out for a couple of years if it is still working but I expect it will as it is a large enough gauge to last a long time

I used this to make a brooder for my 9 ducklings and 11 chicks, it has worked really well at keeping them contained. The brooder lamp hangs on the side and have had no problems with it getting too hot! It is a little flimsier than I expected though...

Building chicken coop and purchased 2 rolls 25' rolls of 4' x 1/2" mesh welded wire fencing. First roll was not too bad only had about 2' wasted due to bad manufacturing. But the second was terrible, close to half of the roll was unusable unless I wanted to use more material to put in some 2' patches. It had multiple wires broken in the middle as well as several spots that were 4' long that had 2 wires right next to each other leaving a 1" openings. All this was before the manufacturer had galvanized it. Tried to return to HD but they couldn't because it was open and 6" used. So, beware you will not get a full roll and that makes this very expensive. Off to Tractor Supply to buy something different.

I bought this to secure the walls in the dog kennel I built for our American Akita dog. It works very well and because of the tight mesh our dog is unable to bite it to get out. The height is also perfect as it allows the dog to stand upright without the need to adjust. Overall a great product at an ok price.

For our plans this was the only convenient product economically available. As a base for a potato cage it works great.

use it as compost bin exterior. It's easy to install.

Product is nicely wound, no binds, and easy to work with and cut.

This hardware cloth worked great. I was very pleased with it. We used it at the bottom of our garden beds to keep the gopher out. So far so good.

Just what I was looking for, glad it was in stock. Only disadvantage was hard to unroll and keep flat. Used in the bottom of my raised garden beds.

very good quality. Sturdy. This is for our chicken coop, so nothing can get in and harm our girls.

This was perfect to put around my balcony perimeter to prevent my cats from venturing out.

Performed as expected.

Fit for purpose, no issues. Nothing special, either; no better than needed.

Great quality steel mesh

It cuts great stands up I’ve used it before on other projects and I will continue to use it in the future. It’s strong and easy to handle.

It worked remarkably well for the small project I had. It's durable, the right sized mesh, and fairly easy to cut.