Customer Reviews for Everbilt #10 x 2-1/2 in. Phillips Flat Head Zinc Plated Wood Screw (4-Pack)

They did the job I bought them for.

I won’t buy these again. I drilled the correct diameter pilot holes (in wood) and even used lubricant and still the screws were snapping off 3/4 of the way into the hole. I’d pay an extra $0.50 for screws that would work and be strong.

Covered bare wood in one coat

Used to hang a metal sign. Worked really well

worse screws i have ever bought for hanging a door, heades striped out

Just what I needed to hold things in my kitchen. Substantial performed as I hoped.

Overall they are really nice screws but they strip very easily when drilling them into harder wood.

The screws were not strong enough. On my first attempt to use them one broke

Questionable quality control. One screw snapped at the top of the threads when I was screwing it into a properly predrilled hole

I found the screw head "soft “ and easily striped out driving into plywood.

Took care of my needs. Thank you.

The product seem to be made of a low quality metal and the phillips head stripped quite easily. They were also very expensive as only two came in each package. I would not recommend these.

Everbilt #10 x 2 in. Phillis Flat Head Zinc Palted Wood Screw 4-Pack.Good quality I would recommend it,

Absolutely amazing! When you put a Phillips screwing against the head of the screw and twist n the screw goes into the wood!!! And I hope you waste a much time reading this as I did writing it.

These are the cheapest screws I have ever used. 1 out of 2 the heads stripped. This was in wood with full depth pilot hole. Better off using deck screws.

Good screws couldn’t complain

You will need to predrill before using these screws. They are very easy to strip and break.

Broke off. Not strong enough.