Customer Reviews for Everbilt 2-1/2 in. Galvanized Corner Brace (4-Pack)

These black hammered 8 inch corner braces are ideal for hanging a number of different types of shelving. The black hammered metal finish blend well with a variety of different decors. I'm just using a white laminate shelf board. The screws are countersunk to set flush with braces. There are six screws per brace. A four pack of braces. Quite substantial for a good size shelf.

These braces are thick and tough! The weight is substantial and should really hold up well. If you are looking for sturdy braces, these are MORE than enough! The finish has no flaws so if you are worried about what these will look like installed where they will show, don't worry about it. I used these for our kitchen island and they worked like a dream. Installation was easy and the finished product looks awesome.

If you are looking for sturdy braces, these are MORE than enough! The metal is thick, solid and strong. The finish has no flaws so if you are worried about what these will look like installed where they will show, don't worry about it. I used these for our kitchen island and they worked like a dream. Installation was easy and the finished product looks awesome.

I used these to put hand rails on my deck project. They may be small but they screwed on really good on wood and aluminum. I was skeptical but they impressed me in quality and strength. The perfect size, the perfect color and the perfect width! Nice set of brackets - all were identical and in good condition. They are corner brackets, they feel sturdy, they come with screws.

This bracket is small but sturdy. Works very well with using on small shelves. We used this on a furniture shelf which we added in. The bracket color matches the shelf color. Looks really nice and also is very strong. It is well made and supports enough weight for its size. The size of 1” works really well. By far an excellent product with a nice finish.

Wow, strong and sturdy plus looks great. Use for a shelf or any other purposes. When we used this for a shelf it had excellent support and was extremely well made. Looks very nice too. The hammered finish adds to the beauty of this product! We used this to add a garage shelf in and it is perfect. The only issue is the bracket holes are a little too large.

Purely decorative, not strong at all....do NOT bend!------------------------------------------- ---- This is an unbiased review that is unaffected by the fact that I received this product for free. As proof of impartiality, just click on my nickname and see the average of the ratings I have given over 300 reviews to date. ---- As stated above, do not bend these. If you do the paint will flake off. And they are VERY easily bent. They will not hold any significant load and are just decorative. The finish is black paint over a "hammered" stamped piece of steel. There are a full set of black painted screws included but they will also flake off the paint.

These Black L brackets are a very nice addition to any project that will have high visibility. They are well made and the holes that are in them are just the right distance for strong supporting what ever you are anchoring them to. They add additional strength and support to any upright that you are working with. I attached a photo of one by a 4x4 just for reference. These like the 8" corner brackets have a great texture and look really great. They dont bend easy, I tried and almost hurt myself. These look great and are made strong. Nice touch to any project that requires support and aesthetics to give it that finished look.

Heavy duty and comes with screws so have everything needed to install using a Philips head screwdriver. I had an upper deck railing that needed corner reinforcement and this corner brace was perfect. The large size made it easy to align and securely pull the corner together. The angle is well formed and finished. This is a heavy duty angle so I have not doubt that it is plenty strong enough for reinforcing a deck handrail that is about 20 feet above the ground.

I have several raised garden beds that needed reinforcing. The Everbilt 2 inch steel black corner braces did the job for me. I found the screws to be sharp and easy to install into the holes and wood. I placed one brace on the inside of each corner and drilled the screws into the wood. It reinforced those corners that need extra support and moved the corner wood pieces that had parted back together. These braces have given my raised beds extra years of use.

Designed to connect or strengthen the inside junction of wood surfaces such as drawers or shelves but can also be successfully used on outside corners where perfection is not a requirement. The inside radius of the bracket has countersunk holes to minimize screw head exposure while the outside radius does not but that is not necessarily a deal breaker. A dimpling at the bend adds structural strength to maintain the original right angle. The brackets and screws have a powder coated finish that allows for exterior use without fear of corrosion.

I installed this in my work shed to help support a sagging shelf. I like how these brackets are textured. There is a hammered look on both the inside and outside of the bracket. There are 6-screws included for each bracket. The screws are very shallow and require a broad tip hex head driver. The bracket feels heavy enough to support a good amount of weight, especially with 3 screws per side.

These inside corner bracket are heavy-duty solid steel, I got a set of them to use on the portable chicken coops I am building. These chicken coops have two wheels on one end and I lift up the opposite end to move them around the yard like wheel barrows. All of this movement puts stress on the joints of the coop and these steel brackets secure the corners and connections to keep them from moving and becoming dislocated. The pack of 4 brackets come with a set of wood screws for each so installation was a snap. Excellent quality!

These Everbilt 8 in. Black Hammered Corner Braces (4-Pack) are 1 ¼ inch wide and 3/32 inch thick. Six 5/16-inch diameter holes are provided. The holes are countersunk on the inside of the angle to provide a level finish after attachment. The finish is flat black and looks great with the embossed metal. A packet of 24 shiny black 1 ¼ inch long number 12 Philips head screws is included. The metal thickness is fine for reinforcement strength but lacks the rigidity to establish a true 90-degree corner without other influences. I will be using these to attach the ends of a 1 ½ inch thick shelf between two bookcases so they will be fine.

These are your basic 1 inch steel corner braces, but dressed up a little with a coat of black paint. It's nice to be able to buy these already painted and with matching black screws. They have a million uses and I always like to have some on hand. I got these to secure the top cushion on a footrest I made years ago. I like that they are already painted because it saved me a step and a day waiting for primer and paint to dry.

Made in China of steel, colored black, there is very little information on the details of this corner braces construction. I don't know what type of steel it is, whether it is galvanized, powder coated, painted, or whatever. At 5x5 and 1/8" thick, is is strong enough for most homeowners purposes involving woodwork; shelving, cabinetry, etc. Recommended!

These eight inch corner braces are really made to last one bracket weights almost a half pound. Powder coated black and can be used inside or outside. they have 3 holes on each side and come with black screws so you can get your project done quickly I used several to put up some cedar pickets as shelves outside the chicken coops to hold feed, buckets and tools while I am out there working.

These 10 inch corner brackets are made to last more likely longer than the wooden shelf I put up outside the chicken coop. Powder coated black one bracket weighs almost 15 ounces. These come with black screws as well. It took minutes to install. I used one on the end of a two by four so my solar panel for the chicken coop door would get sun all day long

I got the Everbilt 1-1/2 in. Black Corner Brace (12-Pack) since I needed to get some anyways, as I was out again. These do not just look great they have a hardened finish to them so I am not sure if it is baked on paint or if it is a anodized coating. they come with screws in their own little package in with the corner braces. I always called these L brackets. They are also vary stiff and are are strong for their size.

I got the Everbilt 1 in. Black Hammered Corner Brace (4-Pack) as when ever I need these I never have any around to use. These do not just look great they have what seems to be a hardened finish to them so I am not sure if it is baked on paint or if their anodized. they come with screws in their own little package in with the corner braces I always called L brackets They also seem stiff and are not easy to bend so they are strong for their size..

These one inch corner braces are perfect for building a box frame from pieces of wood. They are thick enough to be strong enough but not too thick so they won’t take up much space in the inside perimeter. The screws that come with it will be flat against the brackets so they will be flush when tightened. They are about 3/4” long so the wood has to be one inch or thicker. The brackets are about 1/2” wide.

Everbilt 1 in. Black Hammered Corner Brace (4-Pack) When you have an item you want to save, and glue just isn't right, or enough, these plates are a perfect fix. They come in so many sizes and configurations for any job. When I saw they also came in hammered black, it occurred to me they could add a design element for the fix I needed. I had tried to glue down the trim on a rattan decorative box with leather-like brown trim that kept curling no matter what type of glue I tried. I found that screwing this corner brace over the trim is just what was needed to keep it in place. And the black hammered look of the trim is just the right beautiful design element that was needed as a finishing touch.

These Everbilt Corner Braces (brackets) are made of steel and are strong. I have used these braces, in a variety of sizes and finishes, while completing in-home projects and repairs. I have used them to build or repair bookcases, cabinets, tables and with many other projects. They have recessed screw holes on the inside of the brace, but I have used them on both inside and outside corners. The pack includes matching 1/2 inch screws.

LOW QUALITY; DECORATIVE — The quality of the Everbilt 1-1/2 in. Black Corner Brace (12-Pack) is much lower than the 1 ½ angle brackets that I have purchased in the past. As you can see in the photo, the thickness is about half of that of the previous ones and it is also narrower. With the black finish, these brackets may be intended more for decorative, lightweight applications. Since all that I am doing with them now is to hold a 2x2 in place, they may work OK. They are made in China.

These Everbilt Corner Braces have a variety of uses. They are all metal, strong and come in a variety of sizes and finishes. As a DIY'er, I have used these braces on many projects in my home. I have used them while building bookcases, a wall unit, cabinets, shelving and hanging window blinds. They are also great for reinforcing or repairing a wood joint that is damaged and can be used on both inside and outside corners. The packs include matching 1/2 inch screws. I always keep a variety of these braces in my workshop for my next project.

This is a very versatile corner brace, it is inside corner, not outside, although it can certainly be used but screws will not lay flat. Screws that were provided have been painted using different technology from the braces and paint is much thinner so that it doesn't collect and dry in the Philips notches. All 4 braces are true 90-degree angle, very sturdy and rigid. I used them to support a metal cabinet to a back wall and they held nicely. Load bearing is phenomenal on these and although this is not the best steel it does not flex, bend, or crack easily. I tried purposely destroying one but couldn't, and I don't have particularly weak hands. Rustproofing seems to have been done using a rust proof treatment, primer and epoxy coating. Its nice how people made it so well to the point of being overengineered, just to make sure that it doesn't rust. The screws that were provided were not the same hardness, they are good screws for wood, sheetmetal or with anchors, but are not designed to secure to concrete or brick on its own without a pre-drilled hole and plastic anchor. This is a great brace, top quality and very well priced.

The Everbuilt 10 inch black corner brace ( 4 pack) is made for a heavy duty application. The straps are about 3/16" thick and very stiff. Whatever these are installed on will be rigid and very sturdy. They are coated with a nice smooth coat of black paint . I would not hesitate to use these for a shelf support. There is a package of screws included with the bracketts.

I have been looking for these because I need to mount my vanity back to the wall,whoever did this before i moved in did a shady job so i have to fix it now .My wife asked me to fix the vanity and i told her that it will be done tomorrow.I am trying to make my house a better place for her and my son and i know they will appreciate it.they also work for shelves you hang on the wall. Friends go check them out if you need a good corner brace or to mount your vanity to the wall.

This set of four 8 inch corner braces is very well-designed. The pieces are a true 90 degrees, and the black paint coverage on the metal is consistent on each entire piece in the set. The set of four braces even comes with 24 matching black metal wood screws, so you do not have to worry about finding the right color and size of screws to use. I highly recommend this set of 8 inch braces for any shelving application you may have. They will be very strong and durable.

This is a well-designed 5 inch corner brace which will support a wide variety of shelving when paired with another similar brace/bracket. It has three holes for screws on each of the two sides (see picture), so this will be very secure. Also, the holes are countersunk so a wood screw will fit flush to the surface of the brace. It comes with the necessary 6 (matching black) wood screws so this was a great feature! I highly recommend it.