Customer Reviews for Fix-A-Floor 1 Gal. Repair Adhesive

Excellent product to help avoid expensive and time consuming removal and reapplication of loose tiles.

This product works very well. I've used 7 gallons to repair at least 100 hollow tiles in my house. I buy gallons of this glue to refill the 10 oz tubes you find in the store. How to refill several 10oz tubes using 1 gallon: Since I have an air compressor at home, I bought 5 tubes of the glue to begin the project and have since been reusing the tubes after they're empty. The process is 1) remove the glue nozzle and 2) eject the plunger out the bottom of the tube with compressed air via 3) the hole in the top of the tube. **Note** If the top hole isn't the right size for the air nozzle, use a wet rag as a gasket over the top hole, then push the air nozzle into the rag to get some good compression in the tube. I use ~80psi and I've done this 20+ times on each tube--works every time. Do this step in the bottom of an old cardboard box for your workspace as it can be quite messy.

Great but difficult to pour thru thin grout lines. Injected it with narrow gauge syringe in the end

Tubes for caulking gun worked best. Took too long to dry in my opinion. Found another product I liked better.

The product works great and took care of the hollow voids under the tile. It also helps the product to flow much easier to warm up the product before applying it.

This product works very well for hollow spots on lvt floor (laminate)planks. Use 1/8"drill bit and flavor injection tool.Really good results,couldn't be happier. All thanks to this product & the how to video I seen on YouTube.

Rating provided by a verified purchaser

Working as desiigned

Rating provided by a verified purchaser

2 weeks later, Fix-A-Floor was still liquid... Do not waste your money

bought the 1 gal because it's a better price. I also bought empty caulking tubes. I was able to fix the noise on my bedroom tiles when you step on them. I recommend the product

When you can get it to penetrate under the tile it seems to work. I had problems getting it to flow into about 1/2 of the drilled holes. Had to drill about every 4-5" around the tile to get anything to flow into the drill holes. Not sure if it is due to having 20" tile. I used a 60cc enema syringe which seemed to help control the pressure better and seal around the drill hole while injecting the material. Time will tell if it holds.

Jug came with a label Fix a Floor no instructions no ingredients period.Got ahold of the company they said best used to fix grout on floors. I bought it because Home Depot shows great fix for wood floors.I have never bought anything that has no ingredients on the label Period Be

Effective on hollow sounding tiles. Challenging to use with narrow grout lines, but a much better alternative to tearing out problem tiles.

Works great to leave out floors before applying new flooring

The upside is that it works. The downside I could not purchase a container from the store nor online to put it in to use on my floors. I ended buying the individual ones.

I used 1 gal to fix 12 pc of 12”x24” tiles, of which, 7 pc of tiles were taken out of floor completely, so a lot of glue was poured onto the thinset. The result is excellent - the tiles are solidly glued to the floor. I ordered another gal to fix the rest of tiles. The video is misleading though

Had a lot of hollow tiles to repair, Fix A Floot has worked perfectly to fix the job.

been using this product for years love it

Works very well, just follow directions to fill in all gaps under the tile.

worked well in areas it could get under, used a vacum on most of it to make it flow better