Customer Reviews for Globe Electric Nate 3-Light Oil Rubbed Bronze Pendant With Clear Glass Shades

Manufacturing fault. It’s tilted one side. It’s poorly crafted. I wish to return but already paid $100 for installation.

The light met all my expectations, the length of it is great for a large Dining room table or a farm house table or even a good size kitchen island. The light is neat and fashionable.

We attached it to a Slanted beam and it hung beautifully because it was made to pivot.

Our lights arrived on time and in tact. Easy installation and my husband had them both up in 20 minutes. These come with the ability to adjust the light to whatever length your would prefer them to hang which was a super nice option.

The light came very nicely packaged with no damage. It was installed in a house under construction by an electrician.The joint at the top allows it to swivel up to 90 degrees, so no problem with my sloped ceiling. It casts a nice light on the kitchen island using 3 vintage Edison 60 watt equivalent LEDs. I think it looks good was was a good value.

Ok, you will have to do a few things that the instruction don't tell ya, like how to run the wire up through the tubing and upper housing . All in all, good deal for the money !

I really like the vintage look and the quality is top notch. Instructions are good but don't tell how to adjust height. There are 3 threaded down rods so you can pull the wires back down out of the collar and remove one or two downrods, then reinsert the wires up through the collar and cut them to the new length. If you want a length between the rods you might be able to remove the threaded fitting at one end, cut the rod shorter and then epoxy the threaded end back into the shortened tube-my idea. Swivel top connection at collar allow the fixture to hang straight from a sloped ceiling. I wanted 3 pendants but needed a single mounting plate due to restricted ceiling space with an air return register right over the island in my older mobile home. This is one of the few units that met that requirement. If you are using multiple lights on a dimmer switch I recommend LED bulbs which draw fewer watts than incandescent bulbs. They cost more in the vintage style but have a much longer life expectancy. As you can see by my photo, the install was quite a challenge.

Love it! Great quality, great price and looks amazing.

This light fixture is awesome I really love it. The color and the style is so modern and all my family and friends talk about it and say how beautiful it is.

Installation was not difficult, if you have installed lamps before. Looks great in our remolded kitchen. Inexpensive for a industrial/retro styled lamp.

The perfect light for our counter area.

Easy to install and look great. Exceeded expectations

Other commenters have mentioned that the angle is slightly off--we found this to be true but my fiance fixed this issue by tightening the rod (turned it clockwise) which definitely helped (why does it come with an adjustable rod anyway??) ...but for the OCD people out there...it is still slightly off so we will be trying to even it out a bit more. Still a great light fixture for $90! All other similar products are twice as much. Also, unless you like a yellow tinted dark pub feel, don't get the Edison bulbs. We tried them, but they were both bright and dark at the same time and did not work in our kitchen so we just got plain soft white bulbs and they look perfect. We have received a ton of compliments on this light fixture! (No one notices its slightly uneven but us and that combined with the price is why I kept this rating at 4 stars)

I now have 9 of these hanging in my kitchen so as you can see I really like them. The last one is over my sink but I needed a wall sconce not a pendant so I modified the light to work like a sconce by using the angle part that was attached to the canopy in the middle of the two short down rods. As you can see in the picture it looks great on the wall.

Just what I was looking for. Easy to install and looks great! Highly recommend this light.

This light was a great choice at the right price. It arrived in a timely manner and in good condition. It was easy to install.

Great looking product for the money. Had electrician install it this morning to update the house before listing (wish we had done it sooner!) Really opens up the room where we previously had a heavy, stained-glass, bar light over-hanging the pool table. Only wish the 3rd rod came in a half-size for better adjustment, but was pleased with just the two rods, since the clear glass globes added length.

looks great. Lightweight so easy to install, but canopy above globe can bend/warp if not carefully handled. Easily adjust height from ceiling but removing any/all of 3 extension rods

Nice pendant light for the price. Several different lengths to choose from and very easy to assemble.

It was easy to assemble. Had the old pendant down and the new one up within an hour. Love the industrial look. Fits great above my table.

Great price for a simple light fixture. Exactly what I was hoping for. It looks great with the vintage bulbs.

You get what you pay for: this is a low-quality light fixture. I'm shocked at all the positive reviews. The fixture looked nice, but once I installed it, I realized the part of the fixture that comes pre-built was bent out of shape and could not be straightened. As a result, the fixture did not hang level. I returned it to Home Depot and called customer service to re-order. They were very nice and gave me 10% off for my trouble. I received the second fixture today, and it isn't square either. I'll return it and look for a light elsewhere. Bottom line: if you want to take a chance on this inexpensive light, at least inspect it before you install and end up with a dark kitchen table and unhappy wife like this guy.

This looks beautiful in my kitchen... I am happy with this purchase.

Overall my wife and I are pleased with this light, the former being more important than the latter. If you're just replacing an existing light and not moving the fixture, as I did, then the installation should be no more difficult than any other light fixture. The light went together easily and looks good. It has a joint to bend up to 90 degrees from the ceiling mount so it can be hung on angled ceilings. Things to know: 1. Does not include any light bulbs 2. Comes with 3 down rods, but you only have to use 1. There is no option to hang it without using at least 1 of the down rod. 3. Single down rod length is 12 inches 4. It is more a centerpiece and the light given off isn't that great. We replaced a fluorescent kitchen light with this and it didn't come anywhere close to putting off the same amount of light, though that is also a function of the light bulbs you put in it. However, the bulbs that look the best in it, Edison bulbs don't seem to put off that much light in comparison to regular bulbs. Light output isn't that great. To compliment it I installed a few 4" recessed LED lights and put everything on a dimmer switch. One of the glass shades came chipped around the opening where it connects to the fixture, but it was not noticeable when assembled so I didn't worry about it, but I point it out because it's something to look for when opening since yours might be chipped in a more noticeable place. The glass also has visible and noticeable air bubbles in it. Again, overall we are very pleased with the light, especially compared with the "school" florescent light it replaced. It adds much more character to the room.

The shipping was incredibly fast and it was packaged very carefully. Assembly was a snap and my husband had this up within 15 minutes. We LOVE the industrial look - it was a perfect fit in our home. We also bought the matching single pendant and love it too! Overall - we were proud of ourselves for making such a good choice and pleased with the service Home Depot provided. Thank You!!!

I was very happy with the quality fit and finish of this light assembly . Everything you need is in the box , including instructions. The finish is durable, and the fitting of the assembly parts go together nice with no special tools. The down rod is in segments so you can decide the height of the fixture. Additionally there is a angle fitting if your mounting on a angled surface. The electrical box mounting bracket fits well and makes the install very easy. My install took 15 minutes , the hardest part being removing the fixture from the wrapping and box. For my application I used a cordless screwdriver with a Phillips bit and a sturdy ladder, That's it! If this is the desired finish and style you will be happy with the quality and how easy it is to install .

We put this light over the kitchen sink, replacing a small dome light. I love the added light at night. I don't have to turn on the overhead lighting now, just to see by the sink. The fixture was much larger than I expected from the picture. I did not use the expensive bulbs that were recommended. The bulbs I used look great. We cut one of the tubed extensions to about 6" to get the right height from the ceiling.

The light fixture is rustic and looks amazing, fitting the space perfectly.