Customer Reviews for Grabber #2 x 2 in. LOX Drive Insert Bit

I have tried a number of different drivers and hardware over the last 40 odd years of building and these are at the top of my go-to list. I have been very happy with the way they drive and remove the screws. They were a little more expensive than the standard Philips hardware and probably on par price wise with Torx. I really like the way they will drive and remove without being straight on with the hardware. Will definitely keep using these drivers.

I used it to fasten and remove the LOX head screws I've never seen before from my upstairs bedroom sub floor. Shipping was normal, no hassles. It did meet my expectations.

Hard to get, good quality, worth it

I have an old tuff shed whose door needed to be leveled as it was sagging. I had to order this bit to remove the wood screws that the installers used to install the door hinges. The bit worked really well. I was able to remove the door hinges and level the door again.

Necessary for Lox screws on deck. Made the job simple.

Took out hundreds of deck screws with only a few stripped

Rating provided by a verified purchaser

Not made from the strongest metals. Make sure you buy handful because they strip out

Worked well. No stripping.

This bit was needed to remove all the old screws from my deck and stair treads so that I could replace the boards with new composite boards. I could find these nowhere locally until I searched the internet and saw that Home Depot carried them online. Not only did they work flawlessly but they also were delivered several days prior to the estimated delivery date.

Rating provided by a verified purchaser

works as expected for this type screw

Rating provided by a verified purchaser

Works as stated, however I am trying to find 6" length type.

The bit works as expected. Happy with purchase.

The LOX drive type for screws is the best I’ve seen. It’s way better than Torx. Home Depot should carry the LOX UltraPro screws made by Grabber. They rock!

Got as expected, just wish I had not had to buy 6.

I recently built a small deck in my backyard for my swimming pool. I used about 5 pounds of the Grabber deck screws with the #2 Grabber bit. I never rounded out one screw and used only one bit. There is a first for everything. It lasted longer then any other bit that I ever used.

The screws strip about as easily as a Phillips do. They are expensive for the "8 points of contact" they tout to avoid that problem. Think I'll stick with the old stand by for a lower price next time.

This was as expected

As expected