Customer Reviews for Jasco 1 qt. Premium Paint and Epoxy Remover
- Removes paint, varnish, lacquer, shellac, epoxy & urethane
- Professional formula designed to work in as little as 15 minutes
- Strips multiple layers of oil, latex, alkyd & chaulk paints
Customer Reviews
Feb 17, 2020
If one is seeking a quick and not too toxic solution to their paint removal project - this IS the...
If one is seeking a quick and not too toxic solution to their paint removal project - this IS the product needed!
Our "fancy" linoleum was partially covered with splashes of paint from a remodel project (no matter how much we tried to cover it thoroughly). Spraying is an easy task - no damage to linoleum. Less than 10 minutes - it was ready to wipe off with a paper towel. Clean, no surprises.
We, additionally, used it on Liquid Nails - took a few sprays over the course of 30 minutes - all became actual liquid and came off like a jello.
Apply in well-ventilated area.
RECOMMEND!!! A+
by rushin2
Feb 14, 2020
I received the JASCO 1 QT. PREMIUM PAINT AND EPOXY REMOVER to test for Home Depot. I have worked ...
I received the JASCO 1 QT. PREMIUM PAINT AND EPOXY REMOVER to test for Home Depot. I have worked in the past doing furniture refinishing and this is not what the pro's use. That being said, it works fine and is much more forgiving on your skin and work area. Relatively low fumes and does a good job. You still need to use gloves and good practices. It does the job. Please see the pictures below that I did on a test piece of wood.
by sferg
Feb 11, 2020
The Jasco 1 gal. Premium Paint and Epoxy Remover is an extremely strong stripper that effectively...
The Jasco 1 gal. Premium Paint and Epoxy Remover is an extremely strong stripper that effectively
removes most coatings. It is safe to use on wood, metal concrete and masonry.
The semi-paste formula is great to use on vertical surfaces.
After your project, this stripper cleans up with water.
Strips up to 5 layers of latex paint in 15 minutes.
Strips up to 5 layers of oil/alkyd paint in 45 minutes.
The product takes quite a while to work and if you have more than 5 layers of epoxy, latex or oil / alkyd
paint you will disappointed. As it will take several applications to remove the paint.
Note: The scrapper and plastic bristle brush that I used started to melt, get soft and lose strength.
A better brush and on masonry a metal scrapper is recommended.
by PunGuy
Feb 4, 2020
I was really amazed at how well this product worked in 15 minutes or less. If you don't want the ...
I was really amazed at how well this product worked in 15 minutes or less. If you don't want the mess of brushing on the stripper this product is perfect. The paint was really tough on the door I was stripping and it took the paint right off. I was really happy with the results and with the convenience of just spraying it on. It almost illuminates one step. I would recommend this product!
by Fouse
Feb 1, 2020
JASCO 16 OZ. PREMIUM PAINT AND EPOXY REMOVER AEROSOL We are happy with our paint and Epoxy remove...
JASCO 16 OZ. PREMIUM PAINT AND EPOXY REMOVER AEROSOL
We are happy with our paint and Epoxy remover we have tried it on paint and removed the paint we were trying to get rid of. It was very easy to use and was very easy to clean up they did with the can said The instructions were very clear we are happy with this product and will recommend it to others.
by Ken50
Jan 31, 2020
We used the Jasco 1 gal. Premium Paint and Epoxy Remover to restore the finish on a pickup truck ...
We used the Jasco 1 gal. Premium Paint and Epoxy Remover to restore the finish on a pickup truck toolbox that has been well used for a number of years. This toolbox had multiple layers of paint in addition to rust areas. The Jasco Paint and Epoxy Remover achieved all the promises listed in the product description and did it easily. With a single application, we were able to easily remove the paint , etc down to the base metal. We fully recommend this product for those tough jobs. PS: The cleanup was accomplished easily using water only.
by PHIL
Jan 24, 2020
I wanted to refinish my grandmother’s old sewing table. It has layers of very old brown paint and...
I wanted to refinish my grandmother’s old sewing table. It has layers of very old brown paint and also a thick clear coat finish. The first application worked really well stripping the clear coat off. Second and third layers worked through the layers of brown paint but not as well as I was hoping. I had to use more muscle than expecting to scrape it off and especially with the wire brush to get in the grooves. It worked well in that it took enough off that I wouldn’t have to go through a ton of sanding belts but didn’t take off as much as I was hoping for for how much time and muscle I spent on it. You have to let it sit for it to work but if you take too long scrapping it starts to re-harden so I recommend working small-medium size areas. Overall it worked okay. It did save me in sanding belts but took time because how many applications I had to do, some muscle, and I still had to do quite a bit of sanding after to get it down to all wood. For a water based remover I was surprised how it worked but still wish it had done a lot more per layer.
by Sjh10
Jan 24, 2020
Jasco paint and epoxy remover was much better than I was use to, it took the paint off in about 1...
Jasco paint and epoxy remover was much better than I was use to, it took the paint off in about 10 minutes right down to the primer. I used a pressure washer on it after ten minutes and all the paint flew off, no scraping or wire brush needed. The remover worked great, it held on to the sides of the fender and on the round pipe it held on all the way around till the paint bubbled up and softened. There were large reflective stickers on the back of the fenders and the remover took them and the paint under them off in one application. The trailer only took 4 hours to remove all the paint so now I can finish it with a sanding sponge and get it primed.
by Bob
Jan 24, 2020
I have used JASCO 1 GAL. PREMIUM PAINT AND EPOXY REMOVER on the last two of my projects and it wa...
I have used JASCO 1 GAL. PREMIUM PAINT AND EPOXY REMOVER on the last two of my projects and it was great.
My first project was coating my dinning table with epoxy and gold leafs to creat nice look over an old dinning table that I have bought second hand, and quickly turn into little mess on the floor, “JASCO. PREMIUM PAINT AND EPOXY REMOVER” Quickly remove all the spill over and left the floors like they were before. My second project was removing all old paint from my door hinges and made them looks like new.
by YARIV
Jan 23, 2020
Wow this stuff is great! It stripped all the chipped cruddy epoxy off the concrete floor. It to...
Wow this stuff is great! It stripped all the chipped cruddy epoxy off the concrete floor. It took a couple of applications but I am ok with that. High quality to me is doing it right the first time. This does that with your product. Read and follow directions first. Then second, test a small area. It could do damage if you use it incorrectly so be warned.
by IndyNE