Customer Reviews for Leviton Decora 4-Gang Midway Nylon Wall Plate, Light Almond

looks great with the gray backsplash that was just done.

These are fine and do an adequate job. We only purchased these because I ran out of the 2-Gang screwless wall plates and it would take about a week to get the additional units I needed. Good temporary solution at a good price.

On some of them. The switch part does not perfectly align with switch casing.

Nice nylon wall plate with no imperfections and clean edges. You have to mount the included screws to the plate, but once attached there is no need to completely remove them. It eliminates trying to attach screws as your holding the wall plate in place.

This Decora wall plate works great I put it on my light switch it’s very durable and will not fade over time. Works great

This Leviton decora outlet cover plate works great I have them throughout my whole house and they are very durable and work just as they’re supposed to.

Simple wall plate to finish the Decora style switch. Very inexpensive plastic cover that looks good too.

Works well with our paint scheme.

Easy to install, looks great and economical.

The best to thing ever for switch & outlet plate covers! No more cracked/split hard plastic covers! And the new Decora rectangular design opening looks great compared to the ancient "stop sign" outlet covers. Do a great makeover with these new Leviton nylon cover plates and Decora electrical hardware. You'll love them!

Way easier than having the kids search the house for a box. Now all we search for is a cords! Where do they go? Also, put it next to a counter so at night the kids can plug in their devices and they aren’t playing on them all night. Easy to install!

it's a wall plate the problem is that it doesn't level itself with the outlet or, it doesn't level the outlet with itself so your plate may be flush against the wall, but one end of the outlet will be raised higher than the other but that's just a cosmetic flaw

Just what I needed for my side by side dimmer switches.

Great value super easy to install without any problem. It will last decades.

Great Durable faceplates

I purchased 4 of these recently to trim out electrical devices in a newly painted room. I was very displeased to find out the plates were molded with a severe curve in them. This was not a shipping issue. The middle bows away from the wall. In case someone thinks tightening the screws more will help, it makes the curve worse since the screws are towards the ends of the electrical device.

These nylon GFCI outlet covers always get the job done. When I first got into this business, I didn't think it was worth it to upgrade to the nylon covers. But I learned very quickly that nylon covers can save you so much time. Whenever you install the cheap covers, there's always a chance you'll crack the cover as you are installing it. Plus these covers are a little larger than the standard covers, which gives you a little more room for variation. These covers reduce the guesswork.

This look great, seem good quality. Though, after about 2 months, the plastic between the switches started warping out.

This gang plate is for 3 switches or outlet or a combination of the 2. The color is very nice and has a glossy look to it, which I like. It is made from Nylon and very flexible. The old switches we have do not match the plate color and I would recommend using switches that match in color. These nylon gang plates are very nice because of there flexibility.

We are in the process of changing out the switches and outlets in our house from standard to rocker switches and square plugs. The Leviton Decora Midway plates have been a practical and very affordable way to upgrade the look of our home. The plates are super easy to install. Black top screws are included and fit perfectly in the holes. The black is very dark and has a really nice shinny finish. We are enjoying the new look of our home.

These work well, I like that the screw is pre set, no little bags to open . they are a little bigger then standard plates which gives a nicer look. the 10 pack is a time saver as they are not in wrapped individually.

Very pleased with this wall plate cover. Its very high quality and seems well made. The color is a light ivory and works well in my bathroom. I had no problem with the installation, all you need is a slot screwdriver, I can handle 8 screws! I purchased this to replace the existing wall plate cover, it was cracking because the prior homeowner over tighten the screws. Products works like it should!

This slightly larger than usual wall plate hides imperfections such as the outlet hole being cut slightly larger than it should have been cut. The new plate covers the spots where the hole extended beyond the edge of the old wall plate. I will now install lighter switches to match the new wall plate which blends better with the wall paint color. I now plan to replace a lot of switches and wall plates as the current ones are over twenty years old and very yellowed.

I know, this is a simple DIY project for most anyone, and it really is, unless you've done it wrong! But what a difference this little shiny black switch plate made in my not too shiny bathroom! That expensive looking finish really makes the place look nice and clean! The black color too worked very well with my grey and white scheme. A very easy and inexpensive upgrade!

Fits perfectly and easily. 5 minutes to remove the old, cracked plate, and replace it with this new one. From a quality perspective, this product is relatively solid and not too brittle. No errant molding defects or tactile artifacts. No scratches or deformities on the included 4 whitehead screws

Apiece of white plastic that flexes enough for the shape of the wall so there are no gaps if the wall is out. It works well, looks good and cost around a buck.

Works as expected

These are slightly bigger than the regular plastic ones. They also do not crack as easily. They look really nice.

Very nice looking plate. They do not crack easily like the cheaper plastic version. They're also slightly bigger.