Customer Reviews for Liberty Liberty Essentials 3 in. (76 mm) Matte Black Cabinet Drawer Bar Pull (24-Pack)

Rating provided by a verified purchaser

As advertised, arrived at store as promised. Easy to install in existing holes.

They only provide machine screws for a 1/2" - 5/8" door. If you have drawers that the front of drawer box mates to the actual drawer front, you will need longer screws to go through both. In my case doors are 5/8". The provided 1" machine screws are adaquiet for most doors. But, for my drawers, I needed 1 5/8" to go through both the drawer box and drawer front. This is not uncommon. Some manufactures supply machine screws to do both. 1" and 1 5/8 " I had a total of 32 drawers and doors, so I had to buy additional 1 5/8" screws for the drawers. Just take note of the product you are applying the pulls to. If it,s drawers, you will probably need longer screws. As to the quality, these are painted, not anodized. Not sure if alkalyd or epoxy coated.

Handles are hefty and smooth to the touch. Nice wide hold for one's hand... because I have a lot of closely installed handles I can see a few that have a slightly different curve and will later match a bit better. This new hardware looks great!

I own an old chest of drawers that needed a door in the right upper corner repaired. I was needing that repair for years and years. This hardware spurred me into action. After cleaning up glue from the separated joint, I reglued the top piece and clamped it. I fixed the other holes and drilled new ones in order to install these. I really like the looks. My chest of drawers looks good enough to sell, but I'm going to keep it. If these handles maintain their looks for a year, they certainly deserve 5 stars.

It didn't seem right to replace the handle on my kitchen drawers and leave the cabinets alone. Therefore, these were pressed into action. I had to fill the old holes, sand and repaint, before drilling new holes to accept the screws of these new handles. The entire installation process was quite easy and they look good, especially with the new drawer handles. I hope the finish lasts. I expect it to. After surviving one year, I would easy bump the rating to 5 stars.

The Essentials 3-3/4 in. (96mm) center-to-center classic arch nickel plated drawer pull (24-pack)looks clean and shiny with a nice polish in the kitchen. I like the wide arch that makes it easy to grab and pull. I also got them in flat black for drawers on a big built in entertainment center than I built and also built the kitchen cabinets that these were used on. They come with mounting screws and are very well built.

The Essentials 3-3/4 in. (96mm) center-to-center classic arch flat black drawer pull (12-pack) look great on the built-in entertainment center I made on a 18' L x 9' wall with 10 drawers. I like the look of the arch and how wide and easy they are to grab. All of the handles came with a nice flat black finish with no flaws and mounting screws. I got some nice nickel plated ones for the kitchen also.

This pull has a nice simple profile and can look modern or classic depending on pairing with cabinet design/finish. Finish is smooth and even with a little bit of grip to it. The threads to install were cut nicely with no sharp edges. Included screws are decent quality and attached smoothly. I am using these for shop cabinets and ordered 2 sizes I really like the 3" size for drawers. This larger size seemed too big for my drawers, but worked well for doors on larger base cabinets.

This pull has a nice simple profile and can look modern or classic depending on pairing with cabinet design/finish. Finish is smooth and even with a little bit of grip to it. The threads to install were cut nicely with no sharp edges. Included screws are decent quality and attached smoothly. I am using these for shop cabinets and ordered 2 sizes I really like the 3" size for drawers.

Great drawer pulls..Nice flat black color. Excellent quality and not some hollowed out piece of material. Pretty heavy so they are real good quality. Got them to replace my existing pulls in the kitchen. Had a few left over and I am going to use them as handles for some custom designed boxes I am creating. They are arched so there is room between the drawer and the pull for those with larger hands...Great product.

These were perfect for our kitchen update - they were very easy to install

Home Depot carries a great selection of medium to heavy duty drawer pulls. This 4 inch classic arch nickel plated pull is another great choice for drawer applications needing a substantial metal pull with shiny finish. Its generous width and arch design make it easy to use even with gloves. The finish is rich and flawless and looks to be high quality and very sturdy. Mounting screws are provided.

This flat black 3-3/4 inch arch drawer pull is an attractive complement to any cabinet drawer. Its generous width with comfortable and stylish arch will fit nearly any size drawer including wider ones which require two handles. It is medium duty and has an excellent flat black finish. All the handles appear high qualify with flawless finish. The handles come with sufficient plated steel mounting screws.

This arch flat black drawer pull looks great. It is heavy and obviously solid, not cheap hollow items that cost less. This pull lets you know as soon as you touch it that it is quality stuff. The finish is well done with no noticeable defects. I also noted that it comes with two lengths of screws to accommodate either of the standard thin or thick cabinet faces.

These nickle plated drawer pulls look great in a kitchen with stainless steel appliances. No power tools are needed for installation since you can do it with hand tools and the installation hardware is included. These pulls have a limited lifetime warranty. The weight and quality are very good and make opening and closing drawers easy. The style makes them easy to clean also.

I installed these Classic Arch Flat Black Drawer Pulls on my bedroom furniture. Since the previous pulls were also 3 inches, this was a quick change out. The dresser has two side closets which had knobs but I just drilled an extra hole and replaced the knobs with these pulls. The old pulls were wood and metal. These pulls gave the furniture a nice updated look. The 24 pack is a great value.

RE: Liberty - Essentials 3 in. (76 mm) Classic Arch Flat Black Drawer Pull (24-Pack) I ordered these drawer pulls to replace the existing drawer pulls in my kitchen. The flat black finish provides a great contrast against the white cabinets. Installation is your typical 2-screw setup. The most "difficult" part of the install is cleaning the junk from the drawers so you can get the screwdriver inside!

I got these Essentials 3 3/4 in classic arch nickel plated drawer pulls for the cabinets in my laundry room. I love the look of the slight arch of the pull. They give the cabinets a new and updated look. The 3 3/4 in pulls are a bit larger than the regular 3 in size, but really look so nice on the cabinets. I am thinking about replacing the kitchen cabinet pulls with the arch pulls because of the look on the cabinets.

I had the opportunity to evaluate these high end drawer pulls. First observation is these are heavy, well made and well finished units. They are modern in appearance and have a flawless finish.It is a must that you know the hole distance on your current drawers.. Nickel is my current favorite finish. On new construction you need a template. These are the best quality pulls I have used and am totally impressed

I had the opportunity to evaluate these high end drawer pulls. First observation is these are heavy, well made and well finished units. They are modern in appearance and have a flawless finish.It is a must that you know the hole on your current drawers.. since they are single hole and would not work well with existing 2 hole drawers.. On new construction you need a template. These are the best quality pulls I have used and am totally impressed.

I believe you will be happy with these drawer pulls. They are heavy, modern, reasonably priced and easy to install. They look great (love the arch for my fingers) on any cabinet or drawer, whether it be in the kitchen, bath, laundry room, etc. The package contains one size screw. Unfortunately, if you have thicker drawers like I do in the bathroom, this size will not work. You will have to purchase longer screws.

This is a nice pull, not outstanding but good. I was a little surprised by the feel of this product, given its size I expected more weight to it. The finish of this product is good, not great either. I expected a gleaming super smooth finish, but you can see small imperfections in it when looking closely. If you are looking for something decent that wont break the bank, its a good choice.

These drawer pulls are a duplicate set of ones I already own. My mother-in-law liked the ones I had and wanted a complete set of handles for her kitchen. The quality is good, solidly constructed with a nice, deep finish. The bolts that attach them were a little shorter than I recall the last set being. I had to buy separate screws to get these through the unusually-thick door and cabinet fronts. All in all, this was a minor set back and not a big deal. I would recommend this product.

Black is my favorite color so being able to add black accents around my house is important. These drawer pulls were exactly what was needed in my kitchen. Since the room is small, it is important to make it look its best. The arched flat black pulls are eye candy against the drawers while being very functional. The pulls make it easy to open and close drawers and stay clean looking. The quality cannot be beat.

I was extremely pleased with the style and quality of these pulls for the price. Looks awesome! So happy with this purchase. We purchased them to spruce up our 90's styled kitchen, and are very satisfied with the outcome. It matches our brand new stainless steel appliances. Strong metal, looks more expensive than it was! Only came with the short screws though, so if you need longer ones you will have to get them separately.

These Classic Arch flat black Drawer Pull handles are very well made with heavy grade quality materials. These handles are not only well made, but they also look good. These handles came with only 1 set of short screws for mounting on drawers without a face cover on the drawers. Since the handles only came with a short set of screws, one would need to purchase long screws if installing on drawers with a face cover. My only issue was they did not come with the longer screws as well

These Classic Arch nickel plated Drawer Pull handles are very well made with heavy grade quality materials. These handles are not only well made, but they also look good. These handles came with only 1 set of short screws for mounting on drawers without a face cover on the drawers. Since the handles only came with a short set of screws, one would need to purchase long screws if installing on drawers with a face cover. My only issue was they did not come with the longer screws as well.

These modern drawer pulls are made with great quality and durability. I had originally planned to put these in my kitchen, but I don't think they fit as well given how ultra modern these are and because I feel like they look better with cherry or darker wood cabinets. I ended up installing these in a higher rent rental property that we have. That property has cherry cabinets and stainless steel appliances. I haven't finished installing them yet, but they look great and matches the kitchen very well. The only complaint with these is there aren't two sets of screws included for cabinet and drawer installations. Fortunately, i had some left over from other installs. Other than that, I would definitely recommend these.

THE ESSENTIALS 4 IN. (102 MM) CLASSIC ARCH NICKEL PLATED DRAWER PULL (24-PACK) IS A GREAT BUY AND AN EXCELLENT DRAWER PULL. It is extremely shiny and it is slightly arched but if you want a bright lustrous drawer pull this might be the one for you. The Drawer pull is sized in a sort of standard size, 6 1/2" long with a 4" mounting and comes with a one inch screw for mounting