Customer Reviews for Liberty Modern Square 6-5/16 in. (160 mm) Matte Black Cabinet Drawer Pull Bar with Open Back Design

These 12in pulls are perfect on my pantry cabinets. Love the quality.

These pulls are so stunning and luxurious. They are perfect in my kitchen.

I needed this handle in a 3” (Center to Center). I received one “labeled” 3” (76mm) and this 3” states that 3” is the C2C measurement when, in fact, the overall length of this thing isn’t even 3”… So, therefore, the C2C on this so called 3” isn’t possible to being 3” as needed. The C2C on my so called 3” measures 2.5”! Super annoyed as this was hard to find.

Elevated aesthetic of cabinet

These are more beautiful in person. Great quality and easy to install. They are more of a dull gold and not super shiny which is exactly why I wanted.

So the color is great (very light gold) and they don't fingerprint easily. They are hollow which was a huge surprise at this price, but not a problem (won't notice that once installed). However the backside is open. Yes, open. It's a perfect harbor for bacteria, viruses, grease, dust.... it would be impossible to keep clean and isn't comfortable in hand either. I can't believe a pull would be designed like this. See attached photo: this product is on top of two other brands for comparison.

So the color is great (very light gold) and they don't fingerprint easily. They are hollow which was a huge surprise at this price, but not a problem (won't notice that once installed). However the backside is open. Yes, open. It's a perfect harbor for bacteria, viruses, grease, dust.... it would be impossible to keep clean and isn't comfortable in hand either. I can't believe a pull would be designed like this. See attached photo: this product is on top of two other brands for comparison.

These handles are beyond trash!! The photos speak for themselves! I bought both the 12” and the 6-5/16”; the 12” are far worse but the shorter aren’t much better. Additionally the hollow back feels terrible on your hand (not pictured in the product photos). If I could give zero or negative stars I would.

Nice Handle. Just make sure you have the clearance as it does stick out a little farther than some handles.

I would expect that the handle be hollow inside to save on materials, but I didn’t expect it to basically be a U, where my hand comes in contact with an open space in the grip. Nowhere does it specify this in the photos. Very disappointed.

I got these cabinet knobs knowing they were for kitchen or bathroom cabinets, but I wanted them for a chest that’s pretty close to 70 years old. It’s been painted at least four times. When I got the knobs on they are so beautiful and sturdy yet sleek looking, that I didn’t remember what I wanted to do with the rest of the chest. I’m certain these knobs are for cabinets however they are strong, sleek and very beautiful on this old chest! I’ll look at this a couple days to decide whether to strip it, stain, paint or leave it like it is the knobs stand out very chic I’d buy these also for the kitchen and bathroom. Easy to install and once installed when I placed the drawers in the chest and pulled the knobs to open them I was surprised because the entire chest was strong and sturdy and beautiful looking. I love these knobs it brings this piece of furniture into the 21st century without taking away its age. There are no cons with this the knobs came with three different type screws I chose the one that looked like the ones I removed. I was surprised because the handles I removed were original and metal! These are a very beautiful strong metal Just perfect.

Easy to install and a great way to modernize!

The handle is a nice black drawer or cabinet pull. It is a very simple design and has a matte finish. It is no too flashy so it will work but will not take the shine away from your furniture. It is of good quality and did meet my expectations for the renewal of my kitchen cabinets. The size and shape were great and the installation was exceptionally easy, it took like 2 minutes per handle and I had to drill new holes. Definitely a great product if you like simplicity.

i like the simple design, it is a smaller cabinet pull 3 inches in length. the matte black finish is very nice as well as easy to wipe off. installation hardware is included for 2 different thicknesses of cabinet material. a simple clean look perfect for a nice update from older styles or just a new modern feel. i changed out stainless pulls and the look was amazing.

These Liberty Modern Square Matte Black Bar Pulls have a really neat look to them. We refinished an old furniture piece and were looking for something different to stand out and these drawer pulls were the way to go. The square design of them is enough to draw the eye in their direction. These were new to me because I'm so used to seeing round or classic style drawer pulls and those get a little boring after a while. The matte black finish is very attractive and goes well with just about any color drawer.

These are nice looking basic black pulls (or handles). They feel decent but I don't like the hollow back side. They don't have any rough or sharp edges. However the corners, even though they are slightly radiused do have pointy corners and could do some damage if you hit them hard. The material that they are made of feels solid and substantial. The finish is what I would call a satin black. They come with two sizes of screws, 1 inch long and 1 5/8 inch long. Which will allow you to mount on drawers or doors from about 5/8 inch thick to about 1 9/16 inch thick. The pulls are about 3 1/2 inches long and are about 1 1/4 inches tall. The square portion or the thickness of the pull is about 7/16" The mounting screw holes are 3 inches apart. All in all seem to be a well made and good looking pull but I would prefer the back of the handle was solid and not open.

Finish is black. Metal is silver. I like the unique style and shape but the finish does scratch fairly easily exposing the silver underneath. They look small but chunky on long cupboards. They could easily be used as drawer pulls. You can get creative and angle them, install horizontally or even use 2 at a time vertically on each door. I just did a temporary install on some old light colored cupboards that need to be refinished. I just wanted to see what they would look like against a white surface. They look okay, have some decent weight to them. But the finish is the weak point. Tentatively recommend for occasionally used doors or drawers away from heavy traffic.

These are nicely made, quality drawer pulls and they have a nice matte black finish. Cabinet hardware is a very personal choice and I'm sure that many people will love the design of these pulls but for me they are a little bit too thick and bulky looking for their small size. Maybe they would look nice on a small bedside table or an end table. They are high quality so that's great.

LIBERTY MODERN SQUARE BAR PULL 5-1/16 IN. (128 MM) STAINLESS STEEL DRAWER PULL. These are the lightest weight of the ones I have used. It just does not feel as strong as some of the others in there line up. They do the job and work well, however I would go with some of the other handles over these. Just not a plush as some of the others i have seen with Liberty.

The handles definitely have a great look. The stainless steel color matches just about anything. I like that they are actually pretty big at 5 1/2” which at least in my home they are big enough to be a handle for our cupboards. I have always always liked handles instead of knobs for cabinet doors. They are definitely made well and include different size screw hardware. They feel really solid and I accidentally dropped one and it didn’t scuff it at all. I really like the square simpler design. I used a jig to install mine and I definitely suggest it because it really speeds up the process and it’ll make sure it’s right.

This is another modern graphic design drawer pull in Matt Black finisih. Totally sharp angle design given it a strong hard look. Due to it is casting alloy which is most common in quality material in making hand pull hardware. As it size is not big, there you may need two hand pull for one cabinate drawer. Unless you may have the cabiante drawer in less than 12". Install of it either horizontal or vertical are in well present. If you looking for cooler look and high profile of your cabinate. I test it on black dyed red wood drawer panel to testify how good it was. How to create your design. Less try on it. But it won't be a wrong choice.

The drawer pull themselves look great but I think I need to maybe paint my drawers a different color. They came with the hardware to install them with optional longer or shorter screw bolts for different thicknesses. I also Like how they separate the packaging for the hardware so it doesn’t scratch up the drawer pulls. They are a good size at 3 1/2” and I got a jig to make sure I installed them right where they need to be. The color of the handles are exactly how I imagined a flat black. They feel really solid and well made and should last a very long time.

At 128 mm these are definitely not for every cabinet. These drawer pulls are perfect for anything more on the modern side of things. The pulls are very well made, yet they are slightly on the light side of weight, so I think they are made for everyday kitchens, not anything that is used in a commercial way. The finish is a matte finish, which is great to avoid fingerprinting. The installation was straight forward, all the materials are included, and to install these drawer pulls took me a total of about an hour for the ten supplied. Great product.

Beautiful drawer pull. I actually put these in our new kitchen. There are two sets of screw lengths so make sure youll have the right depth of even being able to get it to the handle which I didn't even think about, had to use the small screw the longer one left too much hanging out. I really like the look of these, I know stainless steel is the color now but I like the look of these with my kitchen and if I ever want to color them I can in the future. They're holding up really well with my 2 kids pulling on them and they're very easy to clean. I will be purchasing another set of 15 for the other half of my kitchen and for my grey bathroom cabinets. Make a handle template, it'll save you a lot of time.

Yes I would recommend Liberty Modern Square Bar Pull. This bar measures 5 1/16 and will fit most drawers in your kitchen. Easy to install and all the parts needed are included. Sleek steel construction adds clean lines to your kitchen update. included are 8 - 32 X 1 5/8 screws for the draws and if you wanted to use them on your cabinets an 8 - 32 X 1 screw is included for that.

The drawer /cabinet pull looks good and is attractive. As for the installation, it was said in the Product overview that if drilling new holes use our installation template for guided help: but there was no template included in the package. Four screws were included (2 different sizes) for the installation, which was good. It is hard to drill the hole at the correct place without a template. It would have been great if the manufacturer had included a drilling template. Although everything looks good, I do not understand why the engineering design was for an odd number for the screw holes, which is 5 and 1/16 inches.

LIBERTY MODERN SQUARE BAR PULL 5-1/16 IN. (128 MM) STAINLESS STEEL DRAWER PULL, umm, uniform distance on all areas, no lack of quality control. Threads are crisp, and clean. Surface finish is uniform and unblemished, nice. As i wrote previously, the quality control is evident. Good pull...............................................................

Very pretty drawer pulls - I like the styling a lot. These go well with white painted cabinets and even as door pulls, they work great and look great. I like the modern feel brought on by the square edges. This adds a lot to a kitchen or a bathroom vanity. I got these to go with a kitchen that is being painted white and I'm very happy with how these look against those doors and how they go with the stainless steel appliances in the kitchen.