No Results Found

Refine by Rating

Customer Images (1)
  • I need to replace the cover on one of the two lights in my kitchen. First before you buy what loo...
  • January 15, 2020

I need to replace the cover on one of the two lights in my kitchen. First before you buy what looks like a standard size ( the only one my store had on hand) measure and measure again. My light bulbs are 48 inches long, a pretty standard length, this is only 46.24 inches. The opening maybe smaller than your bulb, but mine was still larger than this piece. Before I saw that I had already cut the width to size, so I couldn’t return it. I made it work, but using a bit of the cut off piece to finish it up, looks like heck. I turned on the light and while it looks nice and white, when I turned on the light, it was yellow. If some of this was not my fault for not double checking, it would of got a lower rating.

Video & Photo

  • Top 50 Contributor
  • DIY

txgent10

55 to 64, Male
3 out of 3 people found this helpful
more details...
By: txgent10
  • Too small, doesn’t fit standard 2’X4’ drop ceiling light fixture....
  • April 15, 2020

Too small, doesn’t fit standard 2’X4’ drop ceiling light fixture.

Hi

2 out of 2 people found this helpful
more details...
By: Hi
  • Do not fit my 2' X 4' lights.
  • March 28, 2016

These are too small for my 2' X 4' lights. There seems to be a lot of confusion with this product. Someone should look into clarifying what this lens is designed for since it will not fit the typical 2' X 4' lights.

PYOteam

2 out of 2 people found this helpful
more details...
By: PYOteam
  • too easy to be broken...
  • June 18, 2020

too easy to be broken

HomeDepotCustomer

2 out of 2 people found this helpful
more details...
By: HomeDepotCustomer
  • prismatic lens
  • August 08, 2020

Will not fit older fixtures .... not true 24 x 48 inches

jokeyoqui

2 out of 2 people found this helpful
more details...
By: jokeyoqui
  • This was cracked by the time I made it home I looked it over in the store not even a scratch whe...
  • May 13, 2020

This was cracked by the time I made it home I looked it over in the store not even a scratch when I got home it had a 6 inch crack going across it dont know how or why but not very durable. I hot glued it though so it will serve its purpose.

Amiliak

1 out of 1 people found this helpful
more details...
By: Amiliak
  • I recommend to use plexi cutter for easier and smoother...
  • June 23, 2020

I recommend to use plexi cutter for easier and smoother cut. Ordinary box cutter will not work.

Trix

1 out of 1 people found this helpful
more details...
By: Trix
  • These lenses are very hard to work with they crack...
  • September 08, 2020

These lenses are very hard to work with they crack easily.

1 out of 1 people found this helpful
more details...
  • I never made it out the store, a slight breeze...
  • April 21, 2020

I never made it out the store, a slight breeze cracked it in my hands, went back in to get another and it cracked in my hands, I excepted a refund. No thanks to that product

John

1 out of 1 people found this helpful
more details...
By: John
  • How to Cut without breaking
  • April 09, 2015

I am only providing this review to help those who have broken brand new lenses while trying to cut or fit into existing fixture/grid. Best way is with a table saw, fine tooth blade (80), INSTALL THE BLADE BACKWARDS IN THE SAW, feed acrylic lens from front of saw as normal. Use light pressure, go slow and don't let it wonder off the cut line. I have needed to cut these many times over the years and they are getting cheaper, thinner and more brittle. Don't bother with the xacto knife, laminate shears, belt sander, etc.

Cons poor quality of material
  • Pro

DoctorHandyman

Upland, CA
45 to 54, Male
8 out of 9 people found this helpful
more details...
By: DoctorHandyman