I would suggest that “Go2Glue” might be a misnomer for this product. Although it has proven to me to be very good for certain limited applications, if quick adhesion is a priority, there might be other adhesives you will go to first.
I used this glue to adhere PVC brick molding together to form a “picture frame” where both PVC glue and construction adhesive had both failed to do so, even after drying overnight.
I used this glue to repair a drawer pull that was missing a metal “nub.”
I used this glue to repair a broken plastic screen nub.
The product dries clear (an advantage over “construction” adhesive), and is “gel like” (an advantage over most “super” glues) so that it does not run or drip.
Unfortunately, because there is a long cure time (8+ hours), there are limited applications for use of this product. More time could also be required to clean the parts and temporarily secure the mated surfaces (with tape, clamps, etc) in order to achieve a good bond by the time the glue dries.
I was pleased with the product packaging – the cap screws on to the bottle which seems to deter glue from drying in the nozzle, although I experienced one instance when I had to resort to using a finish nail to clear the nozzle.
In my case, I did not care to test the strength of the bond for fear of causing further damage to my repaired items, but during normal handling the repaired parts seemed to bond well, particularly the drawer pull which had very little surface contact between the mated pieces (a 1/16” nub).
Overall, this is a useful product for those circumstances where you need an invisible repair, a strong bond, and you are able to secure the mated surfaces to each other during the long curing process.
Pros: Even Application, High Quality of Material, Easy to Apply, Looks Great, good packaging
Cons: slow to cure